How can I reinstall a file librarycommonformsdll::registerwindows

can how I reinstall a file librarycommonformsdll::registerwindows

Hello

  1. Why you want to re - install 'librarycommonformsdll::registerwindows '?
  2. Are you a pop-up will in the same? If Yes when?

If you see the message then I would suggest trying the following methods and check if it helps.

Method 1:

Put the computer in a clean boot state, then check if that helps you.

To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista or Windows 7 by performing a clean boot.

How to solve the problem by running the clean boot in Windows Vista:
http://support.Microsoft.com/kb/929135

Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

Method 2:

Run the Microsoft Safety Scanner and check if there are any threats found.

Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

Let us know if it helps!

Tags: Windows

Similar Questions

  • When I reboot I reinstall map132.dll error message, how can I reinstall the file

    Can not find the file on the computer with search. Where can I find the file to reinstall?

    Hello

    1 how long have you been faced with this problem?
    2. don't you make changes on the computer before this problem?

    SFC (System File Checker) scan on the computer may resolve this problem.

    SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the box start the search.
    2. right click on cmd in the list programs and then click Run as administrator.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue

    3. at the command prompt, type the following line and press ENTER:

    sfc/scannow

    Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  • How can I reinstall the RTL 120 BPL file?

    Original title: rtl 120 bpl

    How can I reinstall the RTL 120 BPL file

    Rtl120.bpl file has Nothing to do with Microsoft Windows.

    It's just a B orland Precompiled Llibrary file with a third party software provider.

    File rtl120.bpl Embarcadero Technologies and is installed on your system to third party such as software packages:

    AVG (their component PC Analyzer)
    TuneUp Utilities
    Advanced System Care (ASC)
    IOBit Malware Fighter Pro

    For example, if you have installed Advanced System Care and rtl120.bpl file that is installed with it goes missing, the message may look like this:

    ASC.exe - Unable to locate component
    This application has failed to start because rtl120.bpl not found.  Reinstalling the application may fix this problem.

    There may be other third-party applications that installs the file, but if you do not provide the exact error message in its entirety person aren't going to be able to help.  And given that the file has absolutely nothing to do with Microsoft Windows, maybe nobody in the Microsoft community will be able to help you without more complete information - like the error message and that if one of these third-party applications (or those like him) you have installed.

    If the system has worked very well and now the file seems to be missing for some reason, it was probably quarantined (effectively deleted) your antivirus/antimalware unspecified software applications.  Perhaps you can also find an updated file in quarantine and he unquarantine.

    With too little information provided, you can expect only theories and speculation about what the problem is and how to fix it.

    If you have one of these types of third party applications or where the product description includes descriptive as sentences:

    cleaner, mechanic, stop at the stand, detective, doctor, heal, optimize, Inspector, clean, tune up, speed up, fix up, compact, compress, faster, power, boost, boost, gum, muncher. Click fix, instant fix, new, intuitive, errors, stops freezes, stops crashing, stop crashes, stops errors, improves, saving you money, risk free, guaranteed or any third-party program that has an icon that looks like a gear, pinion, belt holders, key, key, screwdriver or plunging arrows?

    You may need to uninstall and reinstall these applications (do what the error message).

    If you have this error and none of these products have been installed and reinstall does not help, then you must go to the support page help because the file has nothing to do with Microsoft Windows.

    You might be able to solve the problem to simply uninstall and then reinstall the distressed product (do says what that error message).

  • Photoshop CS6 asks me to reinstall as Support of Adobe files are missing.  How can I reinstall on a mac when I bought only a downloadable version of CS6?

    Photoshop CS6 asks me to reinstall as Support of Adobe files are missing.  How can I reinstall on a mac when I bought only a downloadable version of CS6?

    I see that for the relevant order number is saved to your Adobe ID, & is active.

    Please check if they are useful.

    Concerning

    Stéphane

  • My Illustrator open with lots of? I delited it and do not wanter reinstall, but right now I can download my instal 270 MB file and there only fonts inside. How can I reinstal my Illustrator CS6?

    My Illustrator open with lots of? I delited it and do not wanter reinstall, but right now I can download my instal 270 MB file and there only fonts inside. How can I reinstal my Illustrator CS6?

    You can download CS 6 apps at the bottom of the link:

    https://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

    Make sure you download exact product, if you had purchased Creative Suite which includes Illustrator, you must download the full Suite.

    Or if you had bought Illustrator CS 6 alone, just download Illustrator configuration files.

  • My reminderfox module missing after firefox update. How can I reinstall without losing any data?

    my module of Fox reminder disappeared after updating firefox. I can install this add-on again, but then I lose all the data that existed before the update. How can I reinstall without losing any data?

    Back up your ReminderFox data before reinstalling. This is stored in a separate file in the folder of the parameters active Firefox (also known as your Firefox profile folder). You can find this file by using a button on the page of troubleshooting information. Either:

    • Help > troubleshooting information
    • type or paste everything: in the address bar and press Enter

    In the first table, click on "view file". Look for a folder named reminderfox and copy it somewhere safe.

    More information: http://www.reminderfox.org/documentation-faq-troubleshooting/#r5

  • I am about to replace my hard drive. How can I reinstall forefox and always keep all my favorites and other related information.

    Question
    I am about to replace my hard drive. How can I reinstall firefox and keep all my favorites and any other relevant information

    The profile is a file that store your personal information in a safe place

    https://support.Mozilla.com/en-us/KB/recovering%20important%20data%20from%20an%20old%20Profile

  • How can I reinstall Windows Vista?

    I have a Toshiba laptop with Vista installed ready recently, but what happens if, at some point in the future, I need to reformat?
    How can I reinstall Vista without a disk?

    Thank you.

    I think that you have not looked in the user manual. This, because there you can find a lot of information how do I reinstall Windows Vista.

    However, the computer Toshiba laptop with Vista have a HARD drive recovery function. On the second partition is a file called "HDDRecovery". It contains the image of the factory settings, and so you can reinstall the laptop without CD/DVD.

    In addition, you can also burn the recovery disks with the Toshiba recovery disc creator and you should do it too. If a faulty HARD drive or something else you need this floppy and otherwise, you must pay for it.

    Normally, you should get the message of reminder of recovery on your laptop and it contains interesting information:

    + Important INFORMATION +.

    + your system is equipped with a hard drive recovery system. If you need repair.
    + your computer in the restaurant to original factory State, you can do it directly.
    + HDD (press F8 when you start your computer, choose "Repair your computer" +)
    + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

    + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
    + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
    + Gets severely damaged.

  • How can I reinstall my Satellite A40?

    I need to reinstall my laptop. I don't want to buy a new copy of Windows XP. How can I reinstall my laptop my DVD-ROM does not read the DVD (but it is able to read CD-ROMs)?

    What can I do?

    Hello

    -You can use the Toshiba Recovery CD!

    -You can replace the drive

    -You can try using the boot from LAN
    This option is not easy. The image files must be placed on the server (nothing for people without experience in computer management, and server)

  • How can I reinstall the program LayoutDll120.EMdll

    How can I reinstall the LayoutDll.120.EMdll, he said this program is missing and it is originally videos and games to not work properly.

    Hello
    • What is the full error message that you receive?
    • What version of Windows are you using?
    • When you receive an error message?
    • What were the changes made before the problem occurred?

    Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 2: Put the computer to boot and then check if the problem persists

    Follow step 1 in the link below,
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.
    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not the computer to STEP7 followed normal startup in the link.
  • My Movie Maker - lost video transition effects. How can I reinstall them?

    I edit video clips with Movie Maker, and recently, I noticed that my home computer has no video Transition effect.

    I need it desperately.

    How can I reinstall these effects that somehow been lost?

    Thank you!

    I edit video clips with Movie Maker, and recently, I noticed that my home computer has no video Transition effect.

    I need it desperately.

    How can I reinstall these effects that somehow been lost?

    Thank you!

    Make a read here: -.

    http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=25682

    To reinstall the filmmaker in XP: -.

    1] you must be logged on as administrator administrator or beneficiary.

    2] now insert your XP CD in the CD-ROM

    [3] start > run > type the following command:

    %SystemRoot%\Inf

    4] click OK to open the INF folder.

    [5] locate the file moviemk.inf

    6] right click on the file and then click on install.

    S.Sengupta Media Center MVP

  • How can I reinstall the dolby home theater?

    I had sound problems with my Aspire V3 (571 G). I heard a noise dry while listening to music and watching videos. It was really boring. I thought it was a problem with the Dolby Home Theater v4, so I went to the control panel > uninstall a program > cinema dolby Home > repair. It does not solve the problem, so I went to C:\ and copied the 'Dolby PCEE4' folder, then I uninstalled the thought of Dolby Home Theater v4 that I will reinstall it by putting the folder to the directory. While it has been uninstalled, I discovered that the problem was not the home Dolby cinema, instead, it was a kind of audio enhancement, so I disabled it by clicking on Audio > manage audio devices > Speakers > properties > improvements and I ticked the box: "turn off all sound effects. The sound is fine, it does not sound dry but now I can't reinstall Dolby Home Theater v4. I put the 'Dolby PCEE4' folder to the C:\ directory and it did not work. I opened the case and found a command called 'install' so I ran the command, but it created only 15000 + (3,79 GB) files in the folder and the home theater Dolby has not yet been installed. So I went to http://us.acer.com/ac/en/US/content/drivers and I entered my name of the model and the OS (Windows 8), but it wasn't a "Home Cinema Dolby' application or a driver available for download. How can I reinstall the Dolby Home Theater v4?

    Think, it comes with the realtek drivers, cause after the failure of windows 8 and install the drivers for it on windows 7, it was the home theater dolby. And the realtek drivers

  • How can I reinstall the following deleted dll: "system32\wxvault.dll."

    I accidentally deleted the following dll: system32\wxvault.dll

    How can I reinstall the dll above.

    Thank you.

    How did you accidentally remove it and isn't in the trash for restore you?

    It seems that this file belongs to The Embassy Suite from Wave Systems Corp. and is shipped on some Dell computers.  It is not an XP file and has nothing to do with XP.  What a pity that it knows absolutely nothing about your system (thanks, MS Answers).

    I seriously doubt that the restoration of the system will help you, because this file has nothing to do with XP.  That looks like an engineer of 'expert' technical support which is retained by Microsoft wild goose chase.   Anything for a reply with a link to a KB article...

    I do not have this software, but it seems that you might be able to download and reinstall from the site WWW Dell here.

    If you are not sure and that the download is not look right, you could post a message in the forums of Dell support or wave of support.

  • How can I reinstall corefoundation dll free

    install the corefoundation dll for free

    I want to know how can I reinstall corefoundation dll for most programs that say they will solve the problem you wait to buy their free program.

    I want to install totally for free please help Im going crazy and the other person who wrote in

    It is a file installed by Apple software products such as iTunes, QuickTime, or iPhone.  Did you recently install or uninstall any Apple software?  See if anything here helps:

    http://search.Yahoo.com/search;_ylt=A0oG7hVzXIROuXEAwaWl87UF?p=corefoundation.dll+site%3Aapple.com&FR=YFP-t-701&FR2=SFP&iscqry=

    Another possibility is that a virus or other such pest that was disguised as a corefoundatio.dll has been removed from your system and that the remains remained in the registry.  Run a MalwareBytes scan on your machine.

    http://www.Malwarebytes.org/

    John

  • How can I reinstall wlidcli.dll

    compture is not runn as befits a would like to know how can I reinstall the program

    Hello

    1. you receive an error message related to wlidcli.dll?
    2. don't you make changes on the computer before this problem?
    3. are you able to use windows live software with no problems?

    I would like your previous thread that also did not contain much information about the issue to help you the best. Please post back more information on the issue.

    wlidcli.dll file is linked to the live software window.

Maybe you are looking for