How can I restart/reinstall my computer to factory settings if it did not come with the Vista CD?

Similar Questions

• XP don't boot-computer did not come with the XP CD

  XP boot not - need XP Recovery CD, but it came pre-loaded on my computer, w/no CD.  Any suggestions?

  Use the XP Recovery Console to check the file system on your drive HARD and correct all problems of integrity of system files caused by problems of power supply interruption and then try to start your system - this may be all you need to do to get your system running.
  Boot into the Recovery Console Windows using an XP bootable installation CD.
  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.
  This is not the same as recovery disks that may have come to a store to purchase the system.
  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.
  The ISO bootable image file you need to download is called:
  xp_rec_con. ISO
  Download the ISO from here:
  http://www.mediafire.com/?ueyyzfymmig
  Use this free and easy program to create your bootable CD:
  http://www.ImgBurn.com/
  Here are some instructions for ImgBurn:
  http://Forum.ImgBurn.com/index.php
  ? showtopic = 61
  It would be a good idea to test your bootable CD on a computer running.
  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are
  done before Windows tries to load.  If you miss it, you will need to restart the system again.
  When you start on the CD, follow the instructions:
  Press any key to boot from CD...
  Installing Windows... going to pronounce.
  Press 'R' to enter the Recovery Console.
  Select the installation that you want to access (usually 1: C:\WINDOWS)
  You may be asked to enter the password (usually empty).
  You should be in the folder C:\WINDOWS.  It's the same thing you see in the Explorer folder C:\WINDOWS.
  RC allows commands the base - copy, rename, replace, delete file, chkdsk, fixboot, fixmbr, cd, etc.
  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.
  Running chkdsk is very well run even if she can't find any problems.
  Assuming your boot drive is C, run the following command:
  CHKDSK C: /r
  Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.
  You must run chkdsk/r again until it finds no error to correct.
  Remove the CD, and then type "exit" to exit the RC and restart the computer.
  You have not to set the BIOS to boot the disk HARD since the CD won't be.
  Once finished the chkdsk/r, see if your system boots.  If this is not the case, to do this:
  The next time that your system has rebooted, start tapping the F8 key until you see the menu Boot Options Advanced XP.  On the Advanced Boot Options menu, select:

  Disable the automatic restart in the event of system failure

  This will display the error message that you don't see when the system restarts.  This is what Windows is supposed to do when there a failure - it is supposed to automatically restart.  The error you see on the screen has your clues...

  If you do not see the menu Options start Advancded or you do not have to turn it off automatic restart on option system in the list of choices, you need to try again until you do.  Start typing the F8 key earlier and more frequently as your system begins to come alive.  If you miss the window of opportunity F8, you must try again.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• How can I get a previous version of Firefox. 17 Firefox does not work with online banking

  How can I get a previous version of Firefox. 17 Firefox does not work with banking online edit

  Similarly I cannot now (with v 17) start a download from a Web site to Quicken. At least it seems with four different financial institutions, I've tried. Each of them worked before version 17. I am now on 17.0.1 so that does not solve the problem.

• How can I restore my system XP to factory settings with on a boot disk? System Restore won't let me back to a date. I need to clean and start over with on a XP boot disk.

  How can I restore my system XP to factory settings with on a boot disk? System Restore won't let me back to a date. I need to clean and start over with on a XP boot disk.

  You will need to go on the manufacturer of your pc and then ask for a windows xp disk and drivers. This will give you a new copy, but not out of the box state. For an out of the box, get a recovery disk. Just answer what you want.

• How can I check if I have a 32 or 64-bit processor? Compatible with the 32 bit processor 64 bit operating system?

  How can I check if I have a 32 or 64-bit processor? Compatible with the 32 bit processor 64 bit operating system?

  operating system 64-bit to 32-bit operating system, it's because the processor went from 32 bit to 64 bit?

  I know that 64-bit is faster and more efficient than the 32-bit processor, but why os 32/64 bit too? OS working elbow-to-elbow with processors?

  Could someone explain a little bit. I so want to know. Thank you

  (1) how can I check if I have a 32 or 64-bit processor? Compatible with the 32 bit processor 64 bit operating system?

  (1) os 64-bit to 32-bit operating system, it's because the processor went from 32 bit to 64 bit?

  (3) I know 64-bit is faster and more efficient than the 32-bit processor, but why os 32/64 bit too? OS working elbow-to-elbow with processors?

  (1) If you have an Intel processor, check here: http://ark.intel.com/ (all news are 64-bit, but many in the pentium and celeron series are not)
  No matter what AMD processor once sempron will be 64-bit.

  (2) No. 32-bit operating systems were once popular is that 32-bit processors cannot run 64-bit operating systems (although the 64-bit processors can run 32-bit operating systems.

  (3) see above. The only drawback to a 32 bit OS is that you can not use more than 3.3 GB of RAM, or to run 64-bit applications.

  teengeek.freehostingcloud.com

• My computer did not come with a Windows XP restore disk

  My computer did not come with a restore Windows XP disc and I don't know how to get one, because my computer keeps restarting itself and that goes, "your computer must was closed incorrectly, or because of a power failure" and he gives me 3 options of safe mode and then gives me the opportunity to go to windows normally... but all the options I chose... It keeps just restarting on me... My computer did not come with a restore disc and Idk anyone who owns one... then where would I go to get one?

  Some computers have a built-in hard disk recovery partition.  Search for information on this subject on the BIOS screen that appears the first thing when the computer starts.  By pressing Ctrl + F11, accesses a recovery on some Dells partition.

  Otherwise, contact the computer manufacturer and ask if they can provide a restore disc.

• DB did not come with crs after the node is restarted

  Version of the grid: 11.2.0.3

  OS: Red Hat Enterprise Linux 5.6

  Our two RAC nodes node2 has restarted. At the restart, CRS and ASM instance came. But BP did not come.

  How can I check if DB is related to the CRS start?

  How can I activate the DB startup when starting CRS?

  You can use srvctl command Add the database in order to start automatically. read the link below.

  Utility server control reference

• my printer did not come with all the cables needed to connect to my computer

  I just got a PIXMA ip2820 and he came with all the cables needed to connect to my pc or is it wireliss and if so how I managed to connect wireless

  Hello.

  Our printers do not come with USB cables.  If you do not have a cable connected to a previous printer, you can buy any B USB standard cable locally has to establish the connection.  It is a pretty common cable located at most major retailers office supply or electronics.

  The iP2820 can only be used with a USB connection.  It doesn't have wireless capabilities.

  It has not responded to your question or problem? Find more help contact us.

• How can I configure my laptop back to factory settings?

  I'm really sick of my 2008 Dell Inspiron being so slow, whenever I play minecraft... It is not intended to be a portable game, but that's all I have. I want to know how to put my computer laptop back to factory settings, like when you start it for the first time, straight out of the box. In addition, I did not drive when I bought over 5 years ago, do not judge me. Help please!

  Hello Andy.L.C

  No one will judge you.

  Your PC must have a hidden partition which contains an image of the Windows operating system.

  Take a look at this link (especially step 3 "restore the software from the computer to the original state")

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=266618

  I hope this will help you restore your PC to factory conditions.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• my laptop did not come with a dvd and it wont let me login to access my windows vista computer

  I have a Compaq Presario Notebook PC comes with Windows Vista Home Premium already installed so I don't have a recovery disk.  My computer has been locked up and I couldn't leave the screen then I removed the battery and then reinstalled.  Now I can not access my login.  Here is the message I get.

  The service User Profoile Service failed the logon.  User profile cannot be loaded.

  Help, please!  Thank you.

  Maryann Ramsdell

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  and if you need to reinstall vista, here are the different ways to do it:

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I recover data from a disk that has been done under windows xp with the new computer that is running windows 7?

  My drive has been created using a windows xp windows live care and my new computer works with windows 7. How can I get information on the new computer. When I tried to download the software of microsoft it would allow me to do. Any ideas?

  Hi Dorene33,

  ·         What exactly happens when you try to download the software?

  ·         You receive an error message?

  ·         You are able to access drive from devices and printers?

  ·         What happens exactly when you double click on the drive and try to open it?

  I suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malware

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Hope this information helps.

• How can I reinstall windows after replacing the hard drive? Laptop did not come with a disc.

  My internal hard drive went bad in my laptop, easy to replace and relatively inexpensive. However, the laptop came not with the windows disk. So, how can I reinstall windows once I replaced the hard drive?

  Basically, you have two choices. You can communicate with the person who made the computer and see if they can provide either a set of Windows Vista restore disks (I would assume) or an installation for Windows Vista (probably OEM) DVD. If the second choice, determine if you will need to download device drivers or software packages from their web site. OR, you can purchase the operating system of your choice, retail. The wisdom is that, if this is your choice, you see if you will need the device drivers and get those of the web site of the manufacturer.

  Once you have the disks, install in the usual way.

  Tom Ferguson

• Reinstall Windows XP on Acer Aspire One - computer did not come with a recovery CD

  How to use the product key that came with my Acer Aspire one to reinstall Windows XP without CD?

  Hi MariaMouzes

  You can restore your computer configuration using the procedure described in the link below.

  How can I restore my system using eRecovery management program?

  http://Acer.custhelp.com/app/answers/detail/A_ID/12869

  Or you can buy the recovery media by hint at the link below.

  https://store.Acer.com/store/Acerna/DisplayDataValidationServicePage

  Good luck.

• I reformatted computer that had vista on it, but did not come with cd how vista back on it?

  OK so I got my computer and I've had for about 2 years with no problems then I have a virus and I need to reformat it but I forgot that the computer came with a vista installation CD or recovery CD, so I don't know how to get it back, but I don't have the thing to sticker the serial number on the back of my computer vista It was still Vista Home Basic 64 - Bit thank you.

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• How can you save email on ipad pdf in ibooks if they are to come in the form of images? can you stop it

  I get sent a lot of pdf on email for my ipad. They come to the top in the form of images on my email so I can only save pictures no ibooks. Is far from stop this? If so, how? also can you seal my pdf then one both of ibooks for and by e-mail. IM on the road a lot so need to know how to proceed if possible without a laptop.

  Not very high on ipads!

  Press the image, which is actually the PDF open, and then select copy to iBooks from the window that opens. The PDF file will open in iBooks. Then press the share icon in the upper left corner of iBooks, and select send.