How can I restore audio to the factory specifications?

Similar Questions

• How can I restore and recover the database to a different server using RMAN?

  Hello Friend:
  
  How can I restore and recover the database to a different server using RMAN? I want to implement an enviroument which has a different enviroument and different directories.
  
  That's the two servers. different stored different on each server and a single link, a table library where backup set.
  
  I can only restore and recover the database of the Rman command. Could you give me a demo?
  
  Thank you

  How can I restore and recover the database to a different server using RMAN? I want to implement an enviroument which has a different enviroument and different directories.

  That's the two servers. different stored different on each server and a single link, a table library where backup set.

  I can only restore and recover the database of the Rman command. Could you give me a demo?

  Check this box
  * How to restore Rman backups on a different node when the Directory Structures are different [ID 419137.1] *.

• How can I restore section of the menu Tools in the develop module?

  I seem to have lost the base figure in the Tools menu of the 5.7 Lightroom Develop module (latest download).  How can I restore it?

  Try Cmd/click or Cmd/1.

• How can I restore my system to factory settings, after replacing the hard drive?

  Original title: I have a hard nine; how I can start or put in the back of the recovery disc to my old sistem all gane

  I need help to start the recovery disc, in all new hard drive, in order to restore my system whole back

  Hello

  You can boot from the DVD drive with the recovery disk and then follow the manufacturers installation instructions

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• How can I restore bookmarks in the sidebar?

  I have restored the bookmarks, but while my restored Favorites appear in the drop-down menu, they do not appear in the sidebar. My Favorites bar is empty. How to restore the bookmarks in the sidebar?

  How did you restore bookmarks?

  • https://support.Mozilla.org/KB/restore-bookmarks-from-backup-or-move-them
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  See all bookmarks in the bookmarks (library) Manager?

  For problems with the file places.sqlite (bookmarks, historical) database, you can check in the Firefox profile folder.

  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

  If the extension of Maintenance of places cannot repair the database places.sqlite file remove all places.sqlite files in the Firefox profile folder to rebuild the database places.sqlite latest JSON Firefox backup in the folder bookmarkbackups.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• Outlook Express accidentally deleted data form. How can I restore it from the Recycle Bin?

  As I said I was moving an e-mail on file to clarify that I keep on many topics.  When an opportunity moving fuction outlook express installs all my local folder to the trash.  a when I try to use the import feature in outlook, I don't see the trash to shoot again in outlook or send to outlook?  I'm not the best person with a p/c, but don't use it assign to all my data.  I don't like the paper.

  I went to Microsoft support and the message I got was to call the cemmererical support team?

  Thank you

  original title: how to restore my data express form in outlook that was placed in the trash, I moved an email in a folder and all other data files were sent to the Recycle Bin

  1. Please do not use Outlook as a shortcut to Outlook Express. They are two completely different programs.
  2. Bak files, you see in the trash is moved when you attemptrd to move messages, i.e. an automatic backup that occurs when the compaction of your records. They were probably there already.
   
  If you are moving messages, first examine all records to ensure that they don't end up in the right folder, or becomes one subfolder of another. If this is not the case, read on.
   
  *****************************************
   
   
  Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.
   
  Why OE insists on compacting folders when I close it? :
  http://www.insideoe.com/FAQs/why.htm#compact
   
  Why mail disappears:
  http://www.insideoe.com/problems/bugs.htm#mailgone
   
  Recovery methods:
   
  If you are running XP/SP3, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.
   
  To restore a folder bak on the message store folder, first find the location of the message store.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
   
  Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.
   
  Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.
   
  First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.
   
  If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.
   
  If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
   
  
  If you have not then bak copies of your dbx files in the Recycle Bin:
   
  DBXpress run in extract disc Mode is the best chance to recover messages:
  http://www.oehelp.com/DBXpress/default.aspx
   
  And see:
  
  http://www.oehelp.com/OETips.aspx#4
   
  A general warning to help avoid this in the future:
   
  Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx  

• How can I restore toolbar at the bottom of the Office in the horizontal Position?

  Have Windows XP and can not restore your computer to previous settings using "System Restore"; How to restore the toolbar at the bottom of the screen horizontally. they are all concentrated in the lower corner on the right

  Hi taylode,

  1. Are you referring to the Windows taskbar?
  2. What happens when you try to perform the system restore?

  If you make reference to the Windows taskbar then please refer to the article below and try the steps mentioned, check if it helps.

  How to move the taskbar from its default position Windows or put it back to its default position

  http://support.Microsoft.com/kb/253679

• How can I publish audio correctly the BORDER?

  Hello

  I am new to Adobe EDGE and any sort of HTML5, so please forgive my general ignorance. Also, I looked through all of the outstanding issues on the forum on audio and not found that relate to my question

  I'm still working on how to include audio in my animation of EDGE I want to use in iBooks author. I have the audio to work when I saw it through a browser using the following code as an action to click on a symbol

  var track = new Audio();

  Track.SRC = "sound/flute.m4a";

  Track.volume = 0.5;

  Track.Play ();

  But whenever I actually publish the file as an html file or as a widget for iBooks (which is what I want it to be ideally) audio funtion not work. Am I missing a checkbox or a simple step here?

  If you can help it would be very useful that I was faced with thie for the better part of a day, that I have seen others with audio work and widgets, so I know that it must be possible!

  Oh yes, I have reason to think that .m4a files are the best for use in iBooks author am I not?

  I'm on OSX 10.7.5 running EDGEanimate 1.0

  Thanks for the research/help

  Hello

  I've received a tip yesterday and have not actually tried it yet, but it's here... Take a look inside the widget package and see if the audio file is in there, if not then re - add manually.

  The tip gave me was in fact to create the source link, publish the widget and then add the audio files, I say a quick glance because I noticed that Edge can sometimes leave the files and folders on the widget...

  And do not know what that audio is the best now iBooks began to accept a variety of media since the last update so that we are no longer limited to m4v/m4a... everything you put in seems to get optimized anyway...

  I hope this helps!

• How can I restore changes to the size of the screen, so that the items do not extend off the screen?

  Original title: solution of "Screen Resolution"?

  How can I cancel a change to the 'screen Resolution' in option 'View' in the 'Control Panel' to decrease the size of the "text boxes", which extend beyond the screen of the monitor if the adjustment slider is off the screen?

  I suggest you take your question to the appropriate forum. This forum is for feedback on the site Microsoft Answers itself.

  Windows 7: http://answers.microsoft.com/en-us/windows/forum/windows_7
  Windows Vista: http://answers.microsoft.com/en-us/windows/forum/windows_vista
  Windows XP: http://answers.microsoft.com/en-us/windows/forum/windows_xp

• How can I restore my cpu to factory settings

  tsj215

  I need help. It seems that I have on the same topic so apprently my partitioned original disc where recovery is sopposed to be is on the other partition. I have even a file that says (recovery of move) and the date it happened that I had only had the pc 2 months at the time my questions are this
  1 Although I have my restore disk tht was made when I brought her home, it is not clear, instructions for use and the closest to you I could find said put in the closed disc then reboot... and at this point where the system will be basically take control his does not work

  2 How to use the restore recovery which has been done apparently just before moving out of the partitioned drive
  Please help my system worsens every min

  Melissia

  Hello

  a restore point lets you not reinstall vista

  a restore point puts the computer settings to an earlier point in time

  That's all

  If you have problems with the recovery discs that you did or the process of recovery in general you will need to contact the manufacturer of the computer

  It's their recovery process not microsofts

  and you don't have to boot from the recovery disk and follow the prompts

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  and here is the General information on the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  Save all data, because it will be lost, do the above

• How can I restore my pc to factory settings?

  I want to restore my computer by default. I have a dell dimension E521 and its windows vista. I did not the recovery discs and I can't restore my pc to an earlier point.

  Message edited by sonia01 on 12/06/2008 18:47
  Message edited by sonia01 on 12/06/2008 18:49
  Message edited by sonia01 on 12/06/2008 18:50
  
  

• Restore Vista to the factory specifications

  I inherited a piece o ' * my fiance Dell 22 L w / Vista Home Basic installed. She was horribly swollen, and I want to make Virgin again. I tried to restore it to factory specifications, but access has been denied again his account is an administrator account. I'm went to users and disabled password protection but had to reboot and now I can't find the utility to create the image of factory restore. I had Vista on my Toshiba, tried to install XP but I was told it couldn't be done with a SATA drive, went to Linux Mint, then Win 7. Tried to win * but I'm back to Win 7. Vista is a dog and it's been too long that I tried to work with her. I would really appreciate the help w / this.

  Hello

  Here is the information from Dell using the Dell recovery partition.

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  You can contact dell and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How can I restore my computer to factory settings with using the computers original disc?

  Original title: ' ideas: insert an error code or give a brief description of what you're trying to accomplish or difficulty. " __ »

  I want to know how I can restore my computer settings to factory with using the original disk of computers or to create a recovery disk

  Here you are options to reinstall Vista:

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I restore my computer to factory settings?

  Original title: looking for professional help, big questions.

  Hello, I have a Dell Latitude d630 laptop, and it has some major problems, I can not understand.

  I am running windows xp service pack 2

  for one my mouse keeps moving left and right all by its self, not even try to figure this again

  I have a hidden player called drive X, it is also the boot drive, the only way I can access this hard drive is by selecting the

  also repair option when installing my software, this disk is write protected. Don't know, I installed a new hard drive and drive X

  rest, I installed new memory chips and still have the X drive, I don't know where else to look, where this information

  can be stored.

  I try Dariks boot and nuke, kill the drive, tried to format it, tried to remove all across BACK, once I turn the system

  stop and restart, all the information is back.

  also the files and folders have a tendacy auto recover, when deleting files and folders through BACK I get access denied much, have

  tried using Calc to support, but it don't work, suggestions for anyone who would be appreciated, I'm at the point where I am

  ready to pull my hair.

  Looking for programs or on back of syntax remove items from memory, I know that LH high load is used to put programs in upper memory

  blocks, but how do get out you? you are looking for a way to defeat the drive is write-protected, so that I can remove that darn pesty X drive.

  and anything else you might think you will help. tried sdfix download, but I can't, whenever I get to a link where I can download it

  Windows crashes. Help!

  Considering everything you wrote, your best option is to take the laptop to a reputable local computer professional, not a BigBoxStoreUSA or GeekSquad type of place.

• How can I restore my computer to factory settings so that I can give it with peace of mind about my personal information?

  I would only delete personal files.

  Hello

  Remove only the personal folders is not the way to do

  Everyone can recover with the software of data recovery and your user account name, parameters, etc rest...

  And if everyone would recommend "Dban"; who will even remove any recovery partition (which if necessary for purposes of relocation), because it deletes (as its default action) information on any hard disk that it finds in your computer and you need to reinstall the operating system.

  The way to do what you want to do is to reinstall the operating system that your header request initially (but remember the only way to know that your data is never recoverable is to physically destroy the hard drive!).

  Here are the various ways to reinstall the operating system:

  Contact your computer manufacturer and ask them to send a set of recovery disks to reinstall from.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer (this is why I did not recommend the use of Dban).

  The recovery process can be started by pressing a particular combination of the key or keys at startup.

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.