How can I restore recovery d ' training on hp pavilion dv6-2155dx after format?

How can I restore recovery d ' training on hp pavilion dv6-2155dx after format?

Hello

You can not restore

It was photographed on your hard drive by HP during the fabrication of your machine and cannot be replaced

Buy HP recovery disks instead

read this:

Contact HP and ask them to send you in vista recovery disks to reinstall the operating system back as it was when you bought it

they do it for a nominal cost of $

http://WWW8.HP.com/us/en/contact-HP/contact.html

Tags: Windows

Similar Questions

  • How can I restore my icons on the desktop to backup files after reinstalling Win 7 Home?

    HD failure forced me to reinstall my Win 7 home page.  Fortunately, I was able to save before total chaos ensued.  (My set of files has been relatively low, so I did a copy/paste of my drive c: \.)  How can I restore my desktop icons in the backup files?

    Hi pb1313,

    Thanks for posting in the Microsoft Community. It seems that you try to restore the backup after reinstalling Windows 7.

    As you have copy and pasted the c drive visit this link if you want to manually transfer files ignore the title and see the steps mentioned in this link and check:

    How to restore a Windows 7 computer to a previous Windows installation by using the Windows.old folder

    http://support.Microsoft.com/kb/971760

    Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

  • HP Envy 700 - xt desktop: How can I stop recovery of training hard and switch to disk system?

    Called Costco to get assistance from the technology with a desktop computer HP Envy. The tech asked me to do a system of hard drive recovery, even if I got recovery discs...

    The computer screen showed 100% software installation of recovery in less than two hours and the machine came into fashion "deactivate the tower."

    Problem: 'Disable lap' mode is still ongoing, and now it has been a full 6 hours and then some.

    Question #1: Can the office be manually stop to stop the process without end 'disable on tour' without harming the computer?

    Question #2: Guidance concerning such a judgment and then redo the system recovery once more, but this time with the recovery discs?

    Theoretically, the hard drive by using Recovery Manager F11 recovery should produce the same results as the set of recovery disks.  The set of recovery disks will probably replace all and then give the factory settings.  The result should be the same, however, I don't see no harm to do so.  What did you do to try to get out if "turn on, turn off"?

    On the thing to try before using the drive set - unplug the PC from the wall.  Press the power button, that would be turning on the PC if connected.  Hold button power in 30 seconds to a minute.  And then reconnect the power cord to back in and try to feed normally upward.

  • How can I restore sound to my laptop HP Pavilion?

    I get nothing now...

    You are looking for the manufacturer of the sound card
    site for an updated driver and install it?

    If it is a recent issue, of what it may be worth trying
    do a restore of the system in Mode safe for a time
    before that the problem started.

    With the help of the Windows Vista system restore
    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  • How can I restore my factory settings.i deleted my recovery files

    "How can I restore my laptop compaq presario cq57 windows computer factory settings 7", I deleted my recovery files.

    Hello

    If you have deleted the recovery Partition, you will not be able to create your own set of recovery disks, then you will need to order a replacement, set as described in my previous post.

    If you use these replacement disks to reinstall the operating system, they will also recreate the hard disk recovery Partition - this will allow to use the 'method f11' reinstall Windows if you wish.

    Kind regards

    DP - K

  • I lost my recovery for Windows Vista disk. How can I restore the computer to its original factory State?

    I lost my recovery for windows Vista disk. How can I restore the computer to its original factory State? I can't find how to create recovery discs, I did not have this option in the Recovery Manager

    Hello

    Here are the different ways to reinstall vista

    Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    also ask them if you have a recovery partition on your hard drive to get back to the way you bought

    you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

    Ask them of the exact key sequence

    or borrow a microsoft dvd vista

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    http://www.theeldergeek.com/Vista/vista_clean_installation.html

    Save all data, because it will be lost, do the above

    How to replace Microsoft software or hardware, order service packs and replace product manuals

    http://support.Microsoft.com/kb/326246

  • How can I restore my Satellite C660 to factory settings?

    Hi all
    Just a quick question. How can I restore my Toshiba Satellite C660 to factory settings? I have no disk recovery etc., and there is nothing on the PC I need to back up. Just a simple factory to its original settings restore,

    Some sites say press 0 (zero) and follow the instructions. Others say press F8 and follow the instructions. I hope that one of them is correct but which?

    Thanks in advance.

    If you n t have recovery DVDs (you didn't create it) you can install the recovery image according to instructions in the
    http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

    If this does not work you need to order the original restore on https://backupmedia.toshiba.eu/landing.aspx disc

  • WinDVD didn't work at all - how can I restore it

    Hello

    WINDVD does not work
    How can I restore it? On WINDVD website, they say ask the seller computor, but I have not found how to do on the Toshiba site.

    Thank you

    Hello

    WinDVD is a part of the image of Toshiba and cannot be installed or reinstalled separately.
    If you want to install it you need to use the recovery CD. This recovery CD will set the laptop to factory settings

    But make sure that the installation will format the partition or HARD drive

  • How can I restore my Satellite Pro L20 to factory settings

    How can I restore my computer to factory settings Toshiba Satellite Pro L20

    Hello

    Take your Toshiba Recovery disk, put it in the CD/DVD drive and the start of this drive.

    Then follow the information on the screen.

    All that s.

  • How can I restore my PC to a bygone era

    I lost all my photos, they were stored on the C drive. How can I restore them?

    Hi, Evladouceur,

    This shows how to use the system restore, but if you have deleted the files, check your Recycle Bin.  If they are there, you can restore them.

    What is system restore?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    Restore files from the Recycle Bin

    http://www.ehow.com/how_4685536_restore-file-Recycle-Bin.html

    There are utilities such as undelete file recovery.  Some of them are free to use.

    http://tinyurl.com/9q45fgu

  • How can I restore my backup files on an external hard drive using Windows XP SP3?

    I back up my files to an external hard drive using windows XP sp2. My pc crashed and re installed with Windows XP sp3. Now I can't find the backup on the system tools utility. How can I restore my backup files. Help, please.

    Hi PML.

    Yes, I used the built in «Back to the top of the tool» Unfortunately I don't have the CD. My Netbook is a HP mini computer that comes with Windows XP home. Thank you for your help and I hope to hear from you again.

    How do you reinstall Windows?  If you have used the HP Recovery system to recover from a hidden partition, backup should have been reinstalled.

    I suggest you call HP support.

  • How can I restore my system XP to factory settings with on a boot disk? System Restore won't let me back to a date. I need to clean and start over with on a XP boot disk.

    How can I restore my system XP to factory settings with on a boot disk? System Restore won't let me back to a date. I need to clean and start over with on a XP boot disk.

    You will need to go on the manufacturer of your pc and then ask for a windows xp disk and drivers. This will give you a new copy, but not out of the box state. For an out of the box, get a recovery disk. Just answer what you want.

  • How can I restore all my information on my computer if it has been deleted off the coast?

    How can I restore all my information on my computer if it has been deleted off the coast?

    System restore would be the only way. Now, if you have made a recovery, then there is no way to get something in return.

    How to do a system restore.

    THX

  • How can I restore my acer aspire x 1301 again?

    Acer aspire x 1301

    How can I restore my acer aspire x 1301 again, I have no disk Windows 7 and do not know what to do?

    Acer recovery instructions:
    (1) power on the machine
    (2) the BIOS ACER screen, press and hold down the "Alt" key and the "F10" key simultaneously to start Acer eRecovery.
    (3) once the eRecovery utility appears, click on "Restore default settings".
    4) click 'OK' to continue
    (5) the recovery process to restore a fully functional Windows image.
    (6) once eRecovery finished, press 'OK' to restart the computer.

    Acer Recovery Media purchase program: https://secure.tx.acer.com/RCDB/Main.aspx?brand=acer
    This site is used for the purchase of your Acer recovery media.
    To begin, please enter the serial number or the SNID located on your Acer product and click 'next '.

    Information System
    Get information about your system: http://secure3.tx.acer.com/FindSystem/FindSystem.aspx?title=Information%20About%20Your%20System

    Acer Support main page: http://www.acersupport.com/

    J W Stuart: http://www.pagestart.com

  • If I accicentally delete a tab, how can I restore it?

    If I accidentally delete a tab, how can I restore it?

    I'm not sure what you mean by delete, but I'll mention a few things to get started:

    (1) If you accidentally closed a tab, but there is another tab open in the same window:

    • Make a right click No matter what tab > undo close tab

      • CTRL + SHIFT + t did the same thing
    • Use the menu list in the history of recently closed tabs to re - open the tab

    (2) If you accidentally close a tab, and that the entire window:

    • If you had another open window (Firefox did not close): allows you to re - open the window menu in the history of windows list recently closed
    • If Firefox shuts down: after starting Firefox, check the list of the menu in the history of recently closed windows. If none is listed, try to 'Restore previous Session' on the history menu and then check again.

    Was one of the people you are looking for?

Maybe you are looking for

  • btrfs_merge_bio_hook + a0 error, recovery possible?

    Hello I have a ReadyNAS 204 with btrfs_merge_bio_hook + a0 error. After reboot I can't ssh into the box, but the web interface does not load and the data volume is not mounted. Output of cat/proc/mdstat: md127: active raid5 sda3 SDS3 [0] [3] sdc3 sdb

  • Getting file names of different groups in a data portal

    Hello I find it difficult to recover the file names of different groups in the data portal. For example, say that I loaded two different files of the same .tdms ext data portal that automatically assigns as two distinct groups. My goal is to get two

  • Is it Possible to use numeric Variables in a String Variable for file names?

    Hi all I don't really know how to phrase this question properly, but here's my question. I have a DotNet object and method that someone else wrote to write in an Excel file. I want to use something like: "C:\Program Files\WMT\Sequences\ProductX" + St

  • Reliable link for Windows Installer

    Hi all I use http://www.microsoft.com/download/en/details.aspx?id=8483 link to download Windows Installer 4.5 for Windows XP. I would like to be sure that this link is reliable and will not be changed in the future (at least in the coming months). Co

  • Sourcefire upgrade question

    I am after a few tips here. I have two management centres sourcefire (devices MC2000) running 5.4.1.7 par HA. They would have been on version 6 but 6 did not support HA. Now 6.1 was released, it supports HA for management centres. However, the path o