How can I switch active controller on a table "reset".
Hello
last week, I got a new PS4100 who was on a firmware more old than my existing group level, so I had to install it in its own group first to be able to update the firmware. So I plugged everything, even a cable series CM0 and left of the data center. Remote, I have the initial configuration and finally updated the firmware.
That I could issue a reset command if I could do the initial configuration and attach it to the existing group.
BUT: after resetting, apparently it starts in CM1 so now I can't do any magic to it. If I connect to CM0 he says is not the active controller and I can not perfom orders.
So, how could I have done this? and how to adjust the machine. (please don't tell me to go to the data center to route the cable from the console... I think that as a rather stupid approach!)
Hello
When you did the firmware update is likely when he swapped the controllers. There are two ways to set the table, either via the serial cable or using the 'remove Setup Wizard'. (RSW) Which is available for WIndows or Linux. (Limited distribution)
The computer running RSW must be on the same subnet as the array. RSW will allow you to add it to your existing group.
Since you have more than one table, you can invest in a server terminal server. They are not very expensive and I find them extremely useful, especially during the firmware update. My preference is to go through series so I can watch the entire process and in the unlikely case where there is a problem, you're already hooked and ready for triage. For example, a compact flash fails.
Kind regards
Don
Tags: Dell Products
Similar Questions
-
How can I switch from 9.3 to 10 iOS iOS? I m getting an error when I install it
How can I switch from 9.3 to 10 iOS iOS? I m getting an error when I install it
Kareems, how are you trying to install? Live? Or from iTunes. You can connect your phone to your computer and launch iTunes and have iTunes download and update the phone.
-
Just updated Firefox to update with new rounded tabs... How can I switch to old square tabs?
Many of us use
Restorer Classic theme (Customize Australis)
Restore the tabs squared, appmenu, modules, small display bar icons and more on Australis UI (Windows/MacOSX/Linux + Fx 29 +). -
How can I switch phones with a member of the family without losing the data on a phone?
How can I switch phones with a member of the family without losing the data on a phone?
jkatts wrote:
How can I switch phones with a member of the family without losing the data on a phone?
Make a backup of each phone to iTunes or iCloud (do not forget to use your Apple ID or personal computer), then do whatever your carrier wants do you to change numbers if that's your intention, then restore these backups on the device of the "other."
-
How can I switch between my two email addresses?
I had an e-mail address which became much too much spam, so I switched to a new e-mail address. How can I switch to my original e-mail that all my friends and family are used to it?
Hi Raymond,
Thanks for choosing Microsoft Community!
You have reached the right forum. Let us work as a team and try to solve this problem.
If I understand correctly, you want to return to the old e-mail address.
Please answer these questions:
1. using a webmail or an email client?
2. do you use the Internet Explorer browser to access e-mail? If so, which version?
You can contact the service provider of e-mail (Gmail, Yahoo mail) for further assistance.
Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.
-
I tried to add 'Korean' in the region and language-> keyboards and languages-> clicked on "change keyboard"-> "Général" tab - > added "Korean", but still do not work when I hit ALT + SHIFT. what I'm doing wrong or what I need to download special software to enter Korean characters if necessary?
Install windows updates.
-
Firewall: How can I SWITCH OFF THE FIREWALL on the PC
How can I SWITCH OFF THE FIREWALL on the PC
http://Windows.Microsoft.com/en-AU/Windows-Vista/turn-Windows-Firewall-on-or-off
Enable or disable Windows Firewall
If your computer is connected to a network, network policy settings may prevent you from completing these steps.
View all
To turn on Windows Firewall Open Windows Firewall by clicking on the button start, clicking Control Panel, clicking Security, and then clickingWindows firewall.
Click turn on or off Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Click on (recommended), and then click OK.
If you want the firewall to block everything, including the programs selected on theExceptions tab, select the block all incoming connections checkbox.
You should not turn off Windows Firewall unless you have another firewall is enabled. Turning firewall offWindows can make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
Open Windows Firewall by clicking on the button start, clicking Control Panel, clicking Security, and then clickingWindows firewall.
Click turn on or off Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Click on (not recommended), and then click OK.
See you soon.
Mick Murphy - Microsoft partner
-
How can I switch to Yahoo Mail classic
How can I switch to Yahoo Mail classic
Look at me, I would say that Yahoo has finally pulled the plug on the "classic" appearance He was always on the cards to do...
-
How can I switch to after the effect of the Italian language English?
How can I switch to after the effect of the Italian language English?
Hello
Please see change the language setting of the Adobe Creative cloud applications if it a CC license.
Otherwise follow an Adobe product for another language or version of trading platform
Hope that helps!
Kind regards
Sheena
-
How can I switch a layer of mixture?
How can I switch an individual layer within the Mix app on my ipad?
Currently, we do not support the free transformation of the layer. But the feature is in our roadmap. Please stay tuned!
-
Whenever I have download cloud Barnard, my old email comes up and he tells me to "check email". It's my old email and I can't get accsess, how can I switch it out whit my other
Hello
Please see the links below:
https://forums.Adobe.com/thread/1446019
CC has a fake email, can not change
Hope that helps!
Kind regards
Sheena
-
How can I switch from Paypal to pay by credit card?
Hello. For unknown reasons, Paypal will not pay my monthly subscription.
How can I switch from Paypal to pay by credit card?
Thank you.
A.S.
Hello
I see that your original plan was stopped, so you must register for the new subscription with payment by credit card.
Thank you
Bev
-
How can I switch the PROPERTY_FALSE as string
Hello
How can I switch the PROPERTY_FALSE & the PROPERTY_TRUE as string to
Set_Item_Property('MY_BLOCK.) MY_ITEM', ENABLED, PROPERTY_FALSE);
My requirement is to write a procedure as enable_fields(P_PROERTY_VALUE..) to enable or disable many items according to the value that I spend.
Set_Item_Property('MY_BLOCK.) MY_ITEM', ENABLED, P_PROERTY_VALUE);
Thanks in advance.Infact, property_false and property_true are not strings, they are consistent with the values 5 and 4 respectively.
So wherever you want to have property_false, spend 5
and property_true, pass 4But usually we do not follow this method, as the value of the constants may vary from one version to the other.
So in your procedure to say, go for turn 1 and 2 to disable
procedure (................, p_property number) is m_set_enable number ; Begin If p_property = 1 then m_Set_enable := property_true; else m_Set_enable := property_false; end if; .... .. set_item_property('item1',enabled,m_set_enable); ... End;
Published by: Dora on December 29, 2009 14:36
-
I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!
Yes, you can have a one word title, by assigning a paragraph style title to this one word. No, you cannot change the text in a Table of contents, but you can change paragraph style font attributes (line) and add for example, a head of points between the types of OCD paragraph and page numbers. No part of the table of contents will not provide hyperlinks in exported PDF documents.
When you look up in the menu bar, you can see the word iPages, or simply Pages. There is no product of iPages.
-
I forgot security rescue and complete e-mail address. How can I see my backup email address or reset my emergency email address?
You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.
(141239)
Maybe you are looking for
-
Check whether or not the magsafe power adapter is authentic
Hello! I bought some 60 W MagSafe 2 Power adapter MD565CH/A, 85 W MagSafe 2 Power adapter MD506CH/A & 45 W MagSafe 2 Power adapter MD592CH/A but the serial number in each category is same for example there are 10 units for 60 W & all have the same se
-
.xls files do NOT open in figures
I have a 2009 end MBP (15 ") and spin El Capitan. I use numbers vn. 3.6.2. I have now 2 external applications this file .xls products that just numbers cannot be read. The first is that despite the many protests and my Bank, they seem unable to do
-
I am more able to access responses from OE Forums. I found a small text of presentation on this site somewhere in announcing that the only forums "techno" use NNTP bridge in the future. I hope that this is only temporary, but if it is permanent, I'm
-
Printing software/Old Photosmart 1115
I have an old Photosmart 1115. I want to connect it to my new computer (Windows 7). What do I need? In addition, the printer (it or my HP camera at the time) came with printing software that allows me to print a wide variety of sizes (and a variet
-
DCOGS do not have transferred to CMV
Great present balance in account deferred COGS, create accounts - transfer to GL does not