How can I update the driver for the webcam running Windows 98 > vista windows?

Hello

How could I go to get a driver who runs a
Home QuickCam vs Webcam on my Windows Vista computer? I found the webcam in an old car for scrap, but the software is not compatible with my Vista. Pleassssse! help > I been up all night looking for the web and gettn dressing!  Thank you, Faye

Get the manufacturer, the brand and model of the Webcam and go to the manufacturer's technical support group and see if they have Vista drivers available for download.  If they do not exist, I'm afraid you're out of luck. If available, download and install and you should be running.  But you should contact the manufacturer.  Given the age, it is very likely that there's no Vista drivers for this device.  There is no realistic way to do your own drivers, unless you are a developer of professional pilot (and even then, it would be not possible).

I hope this helps.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • How can I get a driver for a webcam rocketfish

    How can I get a driver for a webcam rocketfish

    Go to the website of Rocketfish support.

    http://www.rocketfishproducts.com/support.html

    I would like to say to the driver page, but you neglected to provide the model of webcam.

  • How can I update the BIOS without windows on V3 - 372

    I bought an ACER V3-372-57CW and refuses the computer at startup (the Green ACER splash screen at boot EFI appear same) when my Tablet WACOM Intuos 4 (if not fully functional) is inserted any USB port. Customer service Acer not recognize wanted to nor register the question so my last hope is that a BIOS update will solve the problem.

    I'm used to the manufacturers supplying utilities executable flash BACK running under FreeDOS etc but for the Acer V3 - 372, I can only find an executable for Windows 10. Of course, uninstalling the entire system just for the update of the BIOS is not a viable option.

    Is it possible to get either one executable for the update of the BIOS BACK or something that could be used from within Linux (with EFI)?

    Thank you

    Masquilier,

    At the present time, I have installed on my Windows computer.  If someone were to tell me that I needed to install another operating system to update the BIOS, I don't think it was a big deal.  I would like to...

    1. create a system with the Windows image backup

    2 clean the clean disk with 'diskpart '.

    3. install any OS they told me that I had to install.

    4. update of the BIOS

    5. after updating the BIOS, I would just wipe the drive with diskpart and restore my Windows system image.

    6. it would take me less than 45 minutes to accomplish steps 1 through 5.  Probably about 30 minutes to be honest.

    Use my logic.  Except that I'm not a Linux expert and don't know how to do what I tell you with Linux.  Just google it.  I see that some people use clonezilla, but I don't know there is a command to do the same.

    https://help.Ubuntu.com/community/DriveImaging

    http://AskUbuntu.com/questions/106943/back-up-the-whole-Ubuntu-system-or-system-image-creation

    http://AskUbuntu.com/questions/19901/how-to-make-a-disk-image-and-restore-from-it-later

    Check with the Ubuntu forum and tell them what you need to do and I'm sure it's possible.

    Important note: own Diskpart is priceless, if you n-front-rear of switching between the old modes and UEFI... or deleting partitions... or clean installation of an OS.  However, make sure that you don't accidentally wipe the bad drive (drive).  Be careful.  There is step-overs.

    Tip: you can get Vanilla iso free Windows from the links below... If you forgot to create a USB factory default your Acer Windows OEM recovery disk.

    https://www.Microsoft.com/en-us/software-download/Windows10

    https://www.heidoc.NET/Joomla/

    And create a media installation with rufus.

    https://Rufus.AKEO.IE/

    Tip2: the link below has some tips and tricks for cleaning 8.1 of Windows Installer or Windows 10.

    https://community.Acer.com/T5/V-and-VN-series-laptops/Acer-Aspire-v3-772-Windows-8-1-clean-install/t...

    Tip3: always back up your personal files before you try everything before.

  • Satellite L300D - 24 d how can I update the graphics driver?

    Hello

    How can I update the driver for my ATI Radeon 3100 graphics card. (Win Vista 32 bit)
    I download and installed the new ATI Catalyst worms. 10.12.

    If I change my graphics card options, there is always the old driver installed... Worms. 22.04.08 8.479.0.0
    Also, it is not possible to change the settings for graphic resolution higher than 1280 X 800 Pix.

    Thanks for the help,

    Fun1975

    First, you must use the page to Toshiba display driver.
    The use of other drivers can lead to highest GPU temperature and cause overheating.

    But if you want to use other drivers, you can do so at you own risk.
    In order to install another driver, go to Device Manager, mark the graphics card, then press on uninstall button.
    Then the driver should be uninstalled.

    After you restart the laptop, you can try to install the new version.

    > It is also not possible to change the settings for graphic resolution higher than 1280 X 800 Pix.
    The internal screen for laptop supports 1280 x 800 high resolution. It is not possible to choose a higher value.

  • How can I get a driver for the glide cruzer sandisk flash drive

    How can I get a driver for sandisk cruzer 4 GB flash drive glide? I use win7 32 bit. I have a yellow flag in Device Manager

    Other usb devices work on this PC?

    Is it the same if you try all usb ports?

    You can test the device on another PC?

  • vCenter Server is a virtual machine, how can I update the host

    I have 2 guests in our environment, I have updated the host of the 2nd, but may not know how to upgrade the 1 host because vcenter server runs as a virtual machine on it. This has me thinking that I don't have the installation program as best as possible.

    Basically, we have 2 Guest boxes and a small box of DC. I don't really want to run vcenter on the dc area. What would be the best soltuong for our environment? Can I keep vcenter as a virtual machine? If Yes, how can I update the host it will run on?

    Thanks in advance everyone... Chris

    I was afraid of that say you that

    Well in this case you may need to update the host manually (see for example http://communities.vmware.com/people/vmroyale/blog/2011/09/15/updating-esxi-5--single-use-esxcli-how-to) even with the need to manually update the host on which vCenter Server is running, I would always run as a virtual machine. There is usually not that many updates.

    André

    Post edited by: a.p..

  • I had to change my Apple ID because of accusations of fraud but my iPhone 6s 9.2 still has the old Apple ID and will not accept old or new passwords. How can I update the iPhone with the new Apple ID 9.2 6s?

    I had to change my Apple ID due to fraudulent charges but my iPhone 6s 9.2 still has the old Apple ID and will not accept old or new passwords. How can I update the iPhone 6s 9.2 with the new Apple ID and password? I tried to perform a complete reset, but which requires the Apple ID and password that doesn't work not... pretty frustrated here.

    YYou have unlink the old iphone you as find my iphone the reset all devices on this subject from your account then plug it to your iTunes then restore a new one after that reset password that under the new phone then connect

  • I managed to see the profile of the artist in Apple's music. How can I update the profile picture?

    I managed to see the profile of the artist in Apple's music. How can I update the profile picture?

    This is a user forum. No Apple itself is allowed to answer your questions here.

    You are probably better contact Apple Support directly to get an answer to your question.

  • How can I update the gps of streets & trips

    How can I update the gps of streets & trips (not sure which version)

    Hi CP agent v-2jeen

     

    Because the question is specific to the streets and trips you contact that it can support the assistance team. I would recommend posting your query to the community of Microsoft streets & trips. Please visit the links below to find a community that will support what ask you in the right direction.

    http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

    You can also check out below help links-
    http://support.Microsoft.com/ph/1058#TAB0
    http://www.Microsoft.com/streets/en-us/support-and-training.aspx

    I hope this helps.

  • How can I update the expiration date on my credit card account?

    How can I update the expiration date on my credit card account?

    How can I update the expiration date on my credit card account?

    Go to your Bank and get a new card.

  • I'm not having implemented the cd with me. How can I update the window components. by mistake I uninstalled the

    I'm not having implemented the cd with me. How can I update the window components. by mistake I uninstalled the

    Reinstall windows components, you've accidentally deleted when you have the game CD with you.

  • How can I expand the sidebar of Windows so that for example the photos are a bit larger?

    How can I expand the sidebar of Windows so that for example the photos are a bit larger?

    You can use your mouse to drag the sidebar of windows...

    Windows Sidebar: Frequently asked questions

  • URGENT! How can I update the build on BB store

    Hi all..

    I want to update the build on BB store. Please help me how can I update the build on bb store after the download of version 1.

    Now, I need to download version 2.

    Thank you

    After signing, choose manage products, then in the line that corresponds to the product that you're gong to update, you should find an icon "+" under the heading of press.  A click on it.

    I don't remember having a problem, this the first time, so I suspect it's pretty much follow your nose after that.

    It is also available help documentation:

    http://developer.BlackBerry.com/DevZone/blackberryworld/adding_and_apps_and_releases_in_blackberry_w...

  • How can I update the BIOS on my Sony Vaio laptop using disc or usb? Note: I can't windows at all.

    Hi, I want to know how can I update the current bios on my sony laptop using the disc or usb.

    I can't access the windows on the laptop at all, because I'm getting STOP: 0 x 00000 "a5 error that says: your bios is not fully compatible with acpi.»
    This error prevents me to access any live disc or recovery disks.
    I would like to learn more about records tho method.
    Thank you.

    Take it to a repair shop, you have damaged the card mother/connections

  • How can I update the rubrics with WebServices?

    How can I update the rubrics with WebServices?

    /Anyone/ has some success with this?

    It becomes important to our business objectives in order to solve the problems within the control elements.

    I can't enter the number of line by line in order to uniquely identify it. How can I get that number, so I can send it with xml "update"?

    A little nudge in the right direction would be much appreciated.

    Aaron.

    You must use a field on the form as the one on the line items, NOT the line number that appears in the journal of the line item. If I understand correctly, the LineItemIdentifier can be any field on the form, even the short description. It is best if you know you will use web services to update the line items, you add a (potentially hidden) field to the form and fill that with unique values when positions are created. If you are working with existing elements of line, then you must choose a field that will be usually unique within a single record and hope, you don't have a lot of duplicates.

  • Exporting DNG from Lightroom, but the thumbnail in os x Finder still shows the unmodified image. How can I update the thumbnail?

    I export a DNG from Lightroom on my iMac (OSx 10.11.2) but the thumbnail in os x Finder still shows the unmodified image. How can I update the thumbnail?

    Export to DNG will always export a unretouched photo non-modified. Your changes are in the XMP of DNG file as text, and most of the viewers of DNG files cannot interpret or use this text. So, it seems that when you export photos in DNG, Lightroom has done what it is supposed to do.

Maybe you are looking for

  • Satellite Pro L850 - slider 'hang up' and related problems

    I recently bought a L850 Pro of the Satellite with Windows operating system.When using the Synaptics Touchpad button the cursor tends to cling randomly on the screen and sometimes disappears completely. Sometimes, the ToolTip displays a small rectang

  • Re: Satellite A300-1MC - no sound via HDMI connection

    When I connect my Satellite A300-1MC on via connection receiver HDMI audio Yamaha in order to play music, no connection is possible, even without sign HDMI on the receiver is lit?any ideas?problem with the drivers or something else?

  • Cannot install windows update getting 0x8024400a error

    Original title: 0x8024400a error Get the 0x8024400a error when I try to update the window how can I solve this

  • A process to save drive H F-Player performs actions writing on C drive?

    Hello Windows 8.1 runs on my SSD - c drive. Every day, I create a backup of my drive f (data) to my h drive (backup) and my i-drive (backup of backup). This cause of action will write actions on my c drive? In other words, Windows copy the source dis

  • SCR-26 broken watertight sealing cover!

    I know this isn't a very popular case, but I love the additional display features that the SCR-26 case overlooks Android 4.4 (I wouldn't touch slow 5.x, bloaty with a bargepole), so I stuck with it despite the way it attaches to the phone with the gl