Similar Questions

• How can I use a function toolwindow or imaqBCGTransform on the image displayed by the image or the canvas area?

  Hello

  I use LabwindowsCVI8.5 & NI Vision. Recently, I met a problem when I tried to apply a toolwindow on diaplayed of the image by image or canvas block, the toolwindow successfully showed, but could not work. I knew that I can use imaqCreateImage & imaqDisplayImage functions to create the image on a new separate window, then, the two work well toolwindow & imaqBCGTransform, but I just want to know is possible to use the functions of Image processing with image display as part of the UIR or as a subgroup of experts? Coz I think it will be well conventional to see the image processed in this way.

  Thank you very much!

  Kitty, ing.

  URT

  I've always wondered why there is no control to an IUR for display of an image of Vision of OR...

  Anyway, there is a hack to incorporate a display image of NI Vision window in a Panel. It has already been discussed on this forum but I can't find the link more.

  It goes something like this:

  HWND window_handle, parent_handle;

  int image_window;
  int left, top, width, height;

  initialize the CVIRTE, etc.

  create the parent panel

  Panel = LoadPanel (...);

  get a new handle to display (optional, see the imaqGetWindowHandle documentation)

  imaqGetWindowHandle (& image_window);

  integrate into a parent group

  WINDOW_HANDLE = (HWND) imaqGetSystemWindowHandle (image_window);
  GetPanelAttribute (Panel, ATTR_SYSTEM_WINDOW_HANDLE, (int *) & parent_handle);
  SetWindowLong (window_handle, GWL_STYLE, WS_CHILDWINDOW);
  SetParent (window_handle, parent_handle);
  SetWindowLong (window_handle, GWL_STYLE, WS_CLIPSIBLINGS);

  Position the display where it should be displayed and resize
  imaqSetWindowSize (image_window, width, height);
  imaqMoveWindow (image_window, MakePoint (left, top));

  I hope this helps...

• How can I use the function 'compare' in Acrobat Reader ms?

  I have the free version of Acrobat Reader DC.

  Now, I want to use the function "understand" but I don't know how to buy that.

  Buy only the function? Or do I have to buy the entire update?

  Thank you very much!

  This is part of the Acrobat Pro product. It cannot be added to Acrobat Reader. It is not an upgrade to Acrobat Reader - attention to not buy the upgrade, you won't be able to run it.

• How can we use the function of group based on time

  Hai sir
  
  I had a table containing fields
  
  EMPCODE NUMBER
  EMPNAME VARCHAR2 (25)
  BAR CODE VARCHAR2 (25)
  VARCHAR2 (25) RESPONDENT
  OUTTIME VARCHAR2 (25)
  INTRTIMEIN VARCHAR2 (25)
  INTROUTTIME VARCHAR2 (25)
  PERTIMEIN VARCHAR2 (25);
  PERTIMEOUT VARCHAR2 (25);
  DATE OF ATTEND_DATE;
  
  
  Who has six columns of time and I need to use the group function
  For example
  0815,0817,1230,1250,1645,1648,
  
  0815 should store in timein
  0817 must store in intrtimein
  1250 need to store in pertimein
  1230 must store in pertmeout
  1645 must store in intrtimeout
  1648 must store in the time-out period
  
  If it is possible using max and min function pls tell me.
  
  Thanks and greetings
  
  Srikkanth.M

  Hi, Srikanth,

  It would help a Lopez, if you posted CREATE TABLE and INSERT statements for a few lines of sample data and the results desired from these data.
  If you want a solution that works in your version of Oracle, say what is your version of Oracle.

  Are you trying to sort columns?
  In other words, you are waying that people can enter data in the six columns, in any order, and you want to reorder the values so that
  respondent<= intrtimein=""><= pertimein=""><= pertimeout=""><= introuttime=""><=>

  If so, you can unpivot data in 6 lines, use the ROW_NUMBER analytic function to number the lines in the order and their pivot then back in order:

  MERGE     INTO     table_x          dst
  USING     (     WITH  cntr as
            (       SELECT     LEVEL     AS n
                 FROM     dual
                 CONNECT BY     LEVEL     <= 6
            )
            ,     unpivoted     AS
            (     SELECT     t.empcode
                 ,     CASE     c.n
                           WHEN  1  THEN  intime
                           WHEN  2  THEN  outtime
                           WHEN  3  THEN  intrtimein
                           WHEN  4  THEN  introuttime
                           WHEN  5  THEN  pertimein
                           WHEN  6  THEN  pertimeout
                      END     AS tm
                 FROM          table_x     t
                 CROSS JOIN     cntr     c
            )
            ,     got_rnum     AS
            (
                 SELECT     empcode
                 ,     tm
                 ,     ROW_NUMBER () OVER ( PARTITION BY  empcode
                                          ORDER BY          tm
                                      ) AS rnum
                 FROM     unpivoted
            )
            SELECT       empcode
            ,       MAX (CASE WHEN rnum = 1 THEN tm END)     AS intime
            ,       MAX (CASE WHEN rnum = 2 THEN tm END)     AS intrintime
            ,       MAX (CASE WHEN rnum = 3 THEN tm END)     AS perintime
            ,       MAX (CASE WHEN rnum = 4 THEN tm END)     AS perouttime
            ,       MAX (CASE WHEN rnum = 5 THEN tm END)     AS introuttime
            ,       MAX (CASE WHEN rnum = 6 THEN tm END)     AS outtime
            FROM       got_rnum
            GROUP BY  empcode
       ) src
  ON     (dst.empcode     = src.empcode)
  WHEN MATCHED THEN UPDATE
  SET     dst.intime     = src.intime
  ,     dst.outtime     = src.outtime
  ,     dst.intrtimein     = src.intrintime
  ,     dst.introuttime     = src.introuttime
  ,     dst.pertimein     = src.perintime
  ,     dst.pertimeout     = src.perouttime
  ;
  

  It should work in Oracle 10 (and more).
  The PIVOT and UNPIVOT features introduced in Oracle 11 can make it a little simpler.

  Perhaps it would be better to require users to enter data in the right-hand columns.
  You can use CHECK constraints to ensure that intimate<= intrtimein=""><= pertimein=""><= pertimeout=""><= introuttime=""><=>

• How to call the javascript function in ADF

  I have the javascript function stored in a .js file external (try to reuse in another application). How can call the javascript function for an event of ADF faces component. I need to I am a newbie to ADF, all ideas are appreciated.
  
  Kind regards
  Surya
  
  Published by: sgodavar on Sep 24, 2010 11:44

  Include JavaScript to the jsff/jspx as page:

  Call it like:
  
  Type = "dblClick" / >
  Amit

• How can I create a function using variables TestStand and call from Meadow step Expression?

  In one sequence, I have dozens of prior Expressions, which are almost the same thing, like this...

  Locals.tagID = (Parameters.singlePhaseEnabled? ('L': "D") & Str (Locals.phase) & "006".

  .. and the only thing different is this three-digit string in the end ("006" may vary). How can I write a function that I can call from Meadow step Expression then it should look like this? ...

  Locals.tagID = MyNewFunction("006")

  You can not write custom expressions for commands.

  That being said, there are two options:

  • Create a sous-suite with a single step. Use a setting of the sequence as "function parameter.
  
  
  • Create a step type custom including a lower level module that implements the function. Add a step edit to allow the user to the steptype graciously change the setting.
  
  
  • Store the variable setting in a local global variable / file and change the value in each step. This will, at least, keep the same 'function' for each step.

  Norbert

• How can I use Office Update without the Office CD?

  How can I use Office Update without the Office CD? On the microsoft Web site, I clicked the options which mean that I would not need the CD (which was not provided with the laptop), but poartway through the service pack update, I get a request for the Office 2000 Professional CD.

  Any suggestions?

  Hello

  Did you mean an office or a note?
  As far as I know the a Note is part of the recovery Image and the CD is not supplied with the unit. In addition, Toshiba units are not delivered with the Office 2000 software.

  However, have you checked to aid either in Word update function?

  You will find an option called verification of updates
  http://Office.Microsoft.com/en-us/officeupdate/default.aspx

  Good bye

• How can I compress javascript and CSS files in my export of Muse?

  How can I compress javascript and CSS files in my export of Muse? When I test my Web site with website speed test in pingdom (http://tools.pingdom.com/fpt/)

  the site has a low rating in the category of the number of CSS and javascript files because there is so much of... Is there a way to reduce the number of CSS files

  that are generated?

  In addition, the code we can place in Muse to tell Javascript to load last so it won't slow down the site are there?

  Thank you

  Theresa

  Regarding your first question. There is no way to compress the code CSS or javascript in files of Muse.

  When Muse exports a site it generates the CSS code for each page. There is no way to combine code similar to a lot of pages on a site by using Muse. (it is not the same process that build you using Dreamweaver or php coding)

• How can I recover the functions drag horizontal and vertical to center the portions of the image being developed? [was: Question]

  How can I recover the functions drag horizontal and vertical to center the portions of the image being developed?

  1 - question double deleted

  2 the name of the program you are using then a moderator may move this message to the correct program forum

  This forum Cloud is not on the program problem... help a program would be Photoshop Lighroom or Muse or?

• How can I use SQL/CUBE to figure out total?

  How can I use SQL/CUBE to figure out total?
  
  Thank you.
  -JC

  Of course, you can do this by using the cube. But cube will produce all the possible combinations of summary. We can filter the unnecessary summariies having clause using the group_id function which is a binary encoding of the columns that are summarized. Below for example, as applied on the table SH.sales.

  Select channel_id, promo_id, prod_id, sum (amount_sold)
  from the sale
  Group of cube (channel_id, promo_id, prod_id)
  having grouping_id (channel_id, promo_id, prod_id) (3, 5, 6, 7)

• How can I do this function of towing in a function

  How can I do this function of towing in a function

  //------------------------------------------------------------------------

  function test1(e:Event):void

  {

  box1_mc.x = 5

  }

  function test2(e:Event):void

  {

  box2_mc.x = 5

  }

  //---------------------------------------------------------------------------

  i magine I have 1000 movie clip like that (box1_mc or box2_mc) it will be difficult to do 1000 functions

  I just need to pass the name of the clip, for example. (box1_mc or box2_mc) to the function

  function test(mc:MovieClip):void {}
  MC.x = 5;
  }

  But if you use some sort of event to call the function, you need to change your earpiece.

  What exactly are you trying to do?

• How can I use the Variance in FR

  Hello
  
  How can I use the formula of variance in financial reports.
  
  I have in my grid 2rows
  
  
  ColumnA CloumnB Cloumnc
  1 2 4 10 total values
  2 values 1 2 3
  3
  
  Now I need to include a 3rd place called variance in the how I can do this.
  
  Please guide me the formula.
  
  Thank you
  I have w

  Hi, HV,.

  There is a default functions avilable in HFR to calecualate the Variance.

  To do this, you have to select the line formula or the formula column.
  in this column formla, you will be able to set these formulas

  Concerning
  Sri

• How can I use my photo albums as screensaver with Apple TV 4th gen

  How can I use a photo album that I created as a screensaver on the generation of Apple TV 4 because it is not an option in this sense?

  What follows is the Apple TV 4 user guide...

  Screensavers

  Apple TV displays a screen saver when it remains inactive for a predefined number of minutes.

  Air screensaver shows beautiful videos of slow motion of the places of the world, upload to an online server, making the screen saver more engaging and dynamic. For the antenna, you can control how many times Apple TV check and download new videos.

  Change the frequency of aerial screensaver download. In settings, go to general > screen saver and select Download New Videos, and then select an option.

  Return by using Apple TV. When the screen saver is active, press the contact surface to get to some app have been previously using.

  Choose a different screen saver. In settings, go to general > screen saver and select the Type. Then select the screen saver you want to use.

  Select the photos to display. Many of the screen saver options display a slide show of photos - it can include photos provided by Apple, or your own collection stored in iCloud. To choose which photos are used, in the settings, go to general > screen saver and select the Type. Then choose one of the types of screensaver-photographers.

  If you choose my Photos, the Photos app opens. Follow the instructions to put photos as screensaver.

  Set the screensaver time-out. In settings, go to general > screen saver and select the setting starts after, and then specify a number of minutes. This indicates to the Apple TV to start the screen saver automatically if the unit has been idle for the specified time.

  Activate the screen saver immediately. Press the Home button to go to the home screen (if it isn't already), and then press the button twice.

• How can I use Windows on the Mac desktop?

  How can I use Windows on MAC desktop products?  OS X El Capitan

  You can install it in BootCamp or virtual VMWare, Parallels or VirtualBox machine

• How can I use my watch to snap the shutter on my iPhone?

  How can I use my watch to snap the shutter on my iPhone?

  Click here > https://help.apple.com/watch/

  Then click on: Remote Camera on the left.

  You'll see instructions.