How can I use Remote Desktop connection to connect to my work computer?

Similar Questions

• How can I use remote desktop to control my PC at home from my Surface?

  I tried searching for an answer, but all the "tutorials" are non-specific in the one area that I do not understand.

  I want to do is be able to use my tablet of Microsoft Surface of anywhere I have internet and use it to control my PC in Windows 8. Which doesn't seem to be the object of the Remote Desktop application, correct? Now, I have enabled Remote Desktop connections in Control Panel and have the application installed on my surface and they both use the same Live ID, but the next step listed is just 'type the name or IP address of the computer"and none of these tutorials explain how to know exactly what one of these things is. I tried to get the name I gave the computer, which also appeared on the window that I learned to remote connection settings, but nothing happened, and to be honest I don't know why he would do. There are a large number of computers on the internet and I don't see anything that would prevent me to a share with a different device name. On the other hand, rather too many results the app can't find.

  I thought then that I would try an IP address, but for some reason whatismyip.com said he did not know. It's probably something on the router and maybe the reason why the previous attempt failed, but I don't have control of the router, so if that's the case then I need an alternative.

  I'll also accept other software that would make it easier, let's just connect from these two devices and selecting from a list, but I have to be able to be controlled from a device Windows RT (I don't need to go the other way, and I do not think that that is supported anyway). Feel free to just suggest something even if you don't know it will work around the problem, it is not necessarily reproducible on your system, so the only way to know is to try it.

  Have you seen this page?

  http://Windows.Microsoft.com/en-us/Windows-8/Remote-Desktop-connection-frequently-asked-questions

  There are solutions for remote desktop connection problems. You do not want to enter the computer name or IP address.

  To find the IP address of your PC - open the charm of search and type cmd. Tap the command-line results of research. At the command prompt, type ipconfig and press ENTER. Find your network connection and note the default gateway address.

  Hope this helps,

  Kate

• How to configure the remote desktop connection

  Original title: home remote desktop connection

  trying to desktop connection remote set-up on a spare home computer how I would go all this? my main computer is wired ethernet my spare part is wireless

  Hey Shawn,.

  Follow the steps in the link to set up a desktop connection remotely on computers.

  http://Windows.Microsoft.com/en-in/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  In addition, through the FAQ for remote desktop connection of

  http://Windows.Microsoft.com/en-in/Windows7/Remote-Desktop-connection-frequently-asked-questions

  For any questions, have a look on

  http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-using-Remote-Desktop-connection

• Cannot print using Remote Desktop connection

  I have a computer that we will called XP. XP was XP loaded on this subject. It is on a home network with ethernet etc. It has a USB Samsung CLP315 printer attached to it, which we will call SAMSUNG.  XP print SAMSUNG without any problem. SAMSUNG is shared and has the latest drivers.

  Configuration on XP
  Pilot # is 3.04.85:44
  Port: USB001 virtual printer for USB Port
  Sharing installed additional drivers Intel environment Windows 2000 or XP

  Using Remote Desktop connection, I connect to my computer at work, that we will call the WORK that has Windows 7 above and is part of a local network. When you use Word for example on WORK, I should be able to print on SAMSUNG on XP. However SAMSUNG on XP does not present as a printer available. However, I can print from JOB printers shared on the local network or locally connected. Unfortunately, it is of limited use to me because I can not physically get the printed paper, or to know if the printed page correctly until the next day, I get to work.

  I have the Settings Options on the remote desktop connection when I connect XP to WORK remotely. I think that this complies with the info I found on the knowledge base.

  On the general tab, I have the correct name of the computer and user. I have "allow me to save credentials" deselected.

  Local "resources" tab, "materials and resources local printers" and "Clipboard" are selected. Under 'More', 'smart cards' and 'Cards series' are selected. Similarly 'Readers' and 'Supported peripheral Plug - n Play' and their subitems are all selected.

  Tab programs not specified

  If there is other information in the options that may be relevant, please advise and I will detail later.

  Already XP used to via the desktop connection to remotely connect to another computer to WORK which took place of XP. When I'd do things on the WORK and wanted to print with SAMSUNG on XP, SAMSUNG has shown on the list of available printers and would print WORK jobs

  On the local network at the office, WORK is connected and print to a shared printer on a computer showroom (XP) which is identical to the SAMSUNG for model # and driver. So by my way of thinking, the driver is already loaded and functioning.

  Any help would be appreciated.

  Hi JoePuter,

  For more specialized assistance on this issue, please repost your query on TechNet Forum.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Thanks and greetings

  Karena R

  Microsoft Answers Support Engineer

  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• Want to access another computer on Windows 7 using Remote Desktop connection

  Dear member of the community,

  I have 2 desktops, one with 10 windows and more with windows 7. Now I want remote access to the computer windows 10 windows 7 without logging on the computer windows 10. Kindly, guide me for the same thing.

  Hello Alice,.

  I would like to know some information about the problem so that we can help you better.

  The computers are connected to a domain network?

  Thank you for details on the issue.

  I also appreciate that fact that you want to access 10 Windows in Windows 7 remotely.

  With Remote Desktop connection, you can connect to a computer running Windows from another computer running Windows that is connected to the same network or to the Internet. For example, you can use all of the programs, files, and network resources from your computer on your computer at home, and it's just that you are sitting in front of your computer at work.

  To connect to a remote computer that computer must be turned on, it must have a network connection, Remote Desktop must be enabled and you must have access to the network to the remote computer (this could be through the Internet), and you must have permission to connect. To obtain permission to connect, you must be on the list of users. Before you start a connection, it's a good idea to search the name of the computer you are connecting to and to make sure that Remote Desktop connections are allowed through the firewall.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Connect to another computer using Remote Desktop connection
  https://support.Microsoft.com/en-us/help/17463/Windows-7-connect-to-another-computer-remote-desktop-connection

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• When I try to send and receive e-mail using Windows Mail, it wants to use a made up connection. How can I use the wireless connection?

  Windpws Mail & Wi - Fi

  I just installed a TalkTalk wireless router which seems to have installed correctly. However when I try to send and receive e-mail using Windows Mail, she wants to use a made up connection. How can I use the wireless connection? Thank you very much, Dianthus MJ.

  Go to tools | Accounts | Mail | Properties | Connection and check or change the connection properties.  You will need to remove the account and then add it again, but try first and also check tools | Options | Connections.

  Steve

• "Remote Desktop connection has stopped working" problem on Windows 7.

  When I try to connect to one of my Windows 2003 servers from my Windows 7 Ultimate pc, I get an error:
  "Remote Desktop connection has stopped working". It has something to do with the NLAapi.dll. If I rename this dll, TS works very well. I used the dll from another computer running Windows 7 RC and it works too, but in one of these two cases, while it corrects the TS connection, it causes other errors, maily with the network and sharing Center. Long story short, I think that there is a bug with nlaapi.dll. I can connect properly to my boxes of Windows XP SP3 servers. I ran all the updates on my 2 k 3 box, but still does not work.

  Here is the log of the event viewer:

  Name of the failing application: mstsc.exe, version: 6.1.7600.16385, time stamp: 0x4a5bce80
  Name of the failed module: NLAapi.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdfc9
  Exception code: 0xc0000005
  Offset: 0x000000000000c138
  ID of the process failed: 0xf90
  Start time of application vulnerabilities: 0x01ca55cc39bf05f0
  The failing application path: C:\Windows\system32\mstsc.exe
  Path of the failing module: C:\Windows\system32\NLAapi.dll
  Report ID: 7772b4f0-c1bf-11de-bfa2-001d60a28de8

  Hi dekopolis,
   
  Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is related to the Server 2003 and would be better suited in the Community (Insert here). Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/categories/ Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Remote Desktop Connection has stopped working since 7 for 2008

  Hello

  Dears I have strange problem and I have read everything discussed here, but it's not helping

  I have asus laptop with Windows 7 Home x 64 N53SM

  everything beautiful, and up-to-date

  Remote Desktop works well also

  one problem I can't use desktop remotely from my laptop to any server that is running windows server 2008 exactly... .other version 2003 work ok

  When I try to access to any server ruin win 2008 Server and put the server ip and password user name years and hit enter I see the error message

  Remote Desktop Connection has stopped working and computer laptop freez second then back with this message

  (Remote Desktop Connection has stopped working)
  A problem caused program stop working correctly
  Windows will close the program and notify you if a solution is available

  This is the complete log of the event viewer

  Results for: Microsoft product: Windows operating system; Version: 6.1.7600.16385; Event ID: 1000. Event source: Application error;

  ===========

  Name of the failing application: mstsc.exe, version: 6.1.7601.17514, time stamp: 0x4ce7ab44
  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
  Exception code: 0xc0000374
  Offset: 0x00000000000c40f2
  ID of the process failed: 0 x 1418
  Start time of application vulnerabilities: 0x01cd48bcf13be48a
  The failing application path: C:\Windows\system32\mstsc.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: 39102a22-b4b0-11e1-a89a-005056c00008

  ===========

  Please help me to solve this problem without need format :)

  Hello

  As you try to desktop connection remotely from Windows 7 to Windows Server 2008, it would be preferable to send the same in the Technet community for more help.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Hope the information is useful.

• How can I use an ipod nano that was synched to another computer?

  My daughter gave me his 2nd generation ipod nano because it is no longer use it.  When I plugged in my USB to load, I got a message informing me that there is an update.  It would not be updated beause "ipod cannot be updated because it contains files that are used by another application."

  What should I do to be able to use this ipod nano?

  I don't think that this message is related to the iPod is synced to another computer...  It is usually other applications or processes on the computer (which is not iTunes) accessing the iPod for some reason if iTunes is not able to perform the update.  However, your question in the subject heading ("How can I use an ipod nano that was synched to another computer?") is valid, since the iPod was previously used by someone else, with a different iTunes library.

  If you want to start using this iPod with your iTunes library and put on your songs, instead of doing an Update, you need to restore.  This erases the iPod, reinstalled the latest version of the software, and sets it to the default settings.  The iPod gets a 'new beginning', as when it was new.  To resolve the problem with this "files in use by another application" error message, try restarting your computer.  Immediately after the computer finishes starting up, run iTunes, plug in the iPod (if it isn't already) and try to do the restore (or Update).  If you still get this error message, please after return.

  If you are restoring, you can configure it to sync with your iTunes library.  You can post back, if you need advice on options for the implementation.

• How can I use first pro to record a video of my computer screen?

  How can I use first pro to record a video of my computer screen?

  You can not.  But it can.

  CamStudio - free screen recording of software

  If you want to edit this video in PP, then save with this codec.

  Lagarith Lossless Video Codec

• Can I use remote desktop if I enter address IP but not the name of the computer.

  Why can I do the desktop connection remote with the IP address but the name of the computer? RI

  Hello

  As topic.

  Please share how to fix my IP address is always changed. Thank you!

  Richard!

  Why can I do the desktop connection remote with the IP address but the name of the computer? RI

  Hello

  As topic.

  Please share how to fix my IP address is always changed. Thank you!

  Richard!

  If the computers aren't on the same network and and/or that the network is not along the NetBIOS name - then you will need to use the IP address or some form of dynamic DNS.  The alternative would be to change your HOSTS file so that you can give the name you want and not have to remember the IP address that is now associated with that name in the HOSTS file.

• How do you uninstall Remote Desktop connection?

  Can help me please to no how do I uninstall the (Remote Desktop connection), I would be very graetfull for any help

  Remove / uninstall Microsoft Remote Desktop Connection 6.0 (KB925876)

  Go to Add/Remove Programs - uninstall KB925876

  If for some reason he's not here...

  You can go to C:\WINDOWS\$NtUninstallKB925876$\spuninst and run spuninst.exe directly from there.

• I have a new server and you cannot use Remote Desktop connection.

  I HAVE A NEW SERVER (HP ML110 G6) AND HAVE USED OLD HARD DISKS, BUT MY REMOTE DESKTOP CONNECTION WILL NOT ME OR OTHERS - WHAT COULD THE REASON BE?

  Hello

  I suggest you to try the steps below and check if it helps.

   The problem can also be caused by your security such as anti-virus program or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must activate new security that you was disabled programs.
  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  May also need to do this on other computers as well.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information is useful.

• How to prevent the Remote Desktop connections to change the refresh rate of premises?

  When remote users connect and that their system has a rate of refreshment, not supported by the local monitor, the display shows "this resolution/regeneration rate is not supported by the monitor." How can I prevent remote systems to change the settings of resolution/regeneration on the local PC?

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

  I hope this helps.

• In windows Vista (Home Premium) Remote Desktop connection does not work correctly

  I installed and re-installed my Vista (Home premium) 2 times already because of the remote desktop connection.  I have a problem connecting from another laptop running windows 7 to connect to my desktop running Vista.  The remote control works on the other hand the meaning of desktop running vista, laptop running windows 7 Professional.
  Looking at the Vista under \System\Remote setting\Remote tab which shows the remote assistance box, but the Office box where you can choose what type of connection can be established remotely is missing.

  I went though all as responses to forum, but nothing helped.  Even in a "sfc/scannow" command prompt running did not help.  It is said that he finds corrupted files, but it cannot solve all corrupted files.  That's why I reinstalled windows hoping to fix this problem but WITHOUT SUCCESS.

  Can anyone help?  I've attached a screenshot of what I see in vista.

  You can connect FROM an original version of Windows to another computer, but you cannot connect to an original version of Windows.

  It is not an 'idea' it's hard cold fact that is at least 12 years old.