Upgrade CPU of my Satellite Pro L300-152

Hello

my laptop is a:

Toshiba Satellite Pro L300-152
Model no. PSLB1E-01R015EN
Celeron 560 2.13 GHz

Can someone tell me what CPU I can pass safely, I use it in a cool environment and care about a few 100 mhz more of her.

Thank you for your support

Before you start to discuss CPU upgrade, check it please this Toshiba document - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

My personal opinion is that upgrading the CPU won't help much and you will not realize a difference in performance for laptop. In my opinion need more RAM or SSD better and faster. This better and better performance some CPU with 100 mhz dating more than one.

Tags: Toshiba

Similar Questions

  • Satellite Pro L300-152 - unable to connect to TV, projector or a external monitor

    Hello
    Peuvent some please help?

    I bought a Satellite Pro L300-152, model without PSLB1E-01R015EN with Vista 32 bit a few months ago to replace an old Toshiba laptop not.

    The problem I have is that I can't connect external devices such as TV, projector, or a monitor.
    I used another laptop in the past with my TV and projector and have had no problems at all. I connected via the VGA port, as it is the only port with the exception of USB. Using a VGA cable, I tried all the settings that I have used in the past, but with no joy.
    I did the setting in the display settings and the FN + F5, but nothing comes up on the external screens except no signal.

    I tried to solve this problem for months and need help, please.

    Thank you
    Karl

    > When I try to update the bios driver I get a message: insydeflash the virsion or ROM file is not newer than the version of the BIOS?

    Strange what s... what version of BIOS is installed on your laptop?
    As much as I know at this time the European Toshiba page provides the version of 1, 50 - WIN update of the BIOS for this model of laptop.

  • Satellite Pro L300-152 lose the power connector - how to disassemble it?

    I have a Satellite Pro L300 - 152 unit, which is out of warranty.
    I have a bad power connector, it has been pushed back and be dislodged from his seat or brocken cradel is within the computer.

    I am trying to remove the back to see if the power connector can be repaired or remains in its cradle.
    I removed all the screws and all devices, but can not get it off the computer.

    There seems to be something with the keyboard, which I took.

    Can you help me?

    To fix the power connector the whole notebook must be disassembled and you must have access to the motherboard. Disassembly procedure is not complicated if you have maintenance manuals and instructions.
    To have full access to the motherboard, you must remove all the screws from the underside and also all the screws under the keyboard. You will then be able to separate the notebooks and disassemble the upper.

    Tell me exactly what you have removed so far?

  • Upgrade of RAM for Satellite Pro L300-1cz

    Hello!

    I want to upgrade the RAM on a L300-1cz. What I have to buy Toshiba memory or can I use [Kingston Value RAM KVR800D2S5 / 2G | http://www.valueram.com/datasheets/KVR800D2S5_2G.pdf] (standard 256 M X 64 Non - ECC 800 MHz 200 - pin SODIMM Unbuffered (SDRAM DDR2, 1.8V, CL5))

    Best regards...

    Hello

    I think you can use the modules of memory from different manufacturers.
    But you must choose the right with straight plug modules;

    As far as I know the RAM module should support this specification:
    * 800 MHz (PC2-6400) 200 - PIN SODIMM DDR2 *.

    Welcome them

  • Satellite Pro L300 - 152 Driver Update problems.

    Hi, I'm new to all this and just about managed to find my way to this Web site. I bought a Satellite as above new brand of PC World Business yesterday 22/10/08.
    I had horrible problems to install several updates of Windows that I finally had to install one by one with a re-boot after each update 'Important '.

    I took the laptop with Toshiba and now I'm using Tempro I 5 alerts telling me to install updates various...

    _3 updates the firmware and update of face recognition 1. _ I extracted the zip file and run the progs and get a message saying "this firmware is not compatible with the selected drive. Contact the manufacturer of your system for more information on formware updates available for this drive "."

    1 updating bios which finally ran with Windows Help and then gave the message «ROM date is not older than the date of the BIOS...» "whatever that means.

    I just bought a laptop, I didn't volunteer to become a technical wizz.
    It feels like I'm doing a work of Toshiba troubleshooting here, and I don't know what I'm doing. Can someone help me?
    Thanks, Guy

    Hey Buddy

    To be honest I don t understand why you react so panicly

    You have a laptop that has a pre-installed Vista OS.
    The fact is that this OS Vista was preinstalled on your laptop computer and for several days/weeks, Microsoft has published a large number of updates and so Vista downloaded and installed updates. But don t wonder about other updates. From time to time you will receive these patches! This is a common behavior of the OS.

    With regard to the Tempro tool;
    This tool informs you about new drivers available, tools or utilities on the Toshiba page.
    To be honest I wouldn t use it. Usually, it's really not important what and when a pilot a tool was released if your laptop runs without problem. I'm always this recommendation; never change a running system.

    Hope I could make a clarification.

    Good bye

  • Satellite Pro L300-152: deleted folder - but need Recovery DVD reocvery

    Hi, I recently bought a toshiba laptop *.

    I accidentally deleted the file on my disk 'data' through formatting the drive.
    I was told that I needed this folder in the hard drive to create my recovery disk

    This file is now gone.
    Is it possible that I can always CREATE the disc or the folder to DOWNLOAD/PURCHASE to use for the recovery process to create the disc?
    Without having to pay for a new disk - [which costs around £30!

    Please try to help because I'm stuck here...

    Thank you

    Bad news buddy.
    Without the recovery folder, you will not be able to create the Toshiba recovery disc.
    Unfortunately, but it looks like you will have to order the recovery DVDs.

    Formatting HARD drive was a bad move :(

  • Satellite Pro L300-152 and the task bar freezing

    Hello

    The taskbar seems to freeze whenever I use my laptop. I try to click on something like the volume and it freezes, I then gives me the option to restart windows Explorer, close windows Explorer, or waiting for the program to respond. Once it has rebooted the icons for volume and Wi - Fi connection disappear from the lower right corner and are not available through any other means.

    There seems to be no consistency to this incident - it happens when programs are running or not, regardless of how many times I use the laptop either hours or minutes, and there is no delay between the taskbar being insensitive (sometimes it doesn't freeze again, sometimes it freezes just after the restart). I did virus, spyware/adware/mallware scans, clean my laptop, and it had made no difference.

    All I have this problem or knows what could be causing it and how it can be stopped? Any suggestions would be welcome thanks

    Kind regards.

    Hello

    Googling around you will find many forums where people write about this problem of gel. It is obviously related to Microsoft and that there must be a few patches.
    I also found the link to a fix that should help you.
    Visit http://support.microsoft.com/kb/932406/en-us and if this can help you.

    Please let us know if this will help.

  • Recovery creator disc error code: 1100 8-48-00000002. Satellite Pro L300-15

    Hi all.

    Satellite Pro L300-152 of the Vista 32 SP2.

    This laptop was gave me to try to repair (another instance of stolen suicide Vista).
    After retrieving the system (no re - install wasn't necessary), I would like to create a disc of recovery for the owner.

    However, when I try to run the "Toshiba Recovery Disk Creator", I get an 'Error' window with the following message is displayed "an unexpected error has occurred. Exit this application and start it again. (Error code: 1100 00000002-48-8). Of course restarting the application generates another identical message.
    No one knows what could be the cause of this error and how do I create a recovery for this notebook drive.

    Take care of all.

    Mike

    Hello

    This error message usually appears because the non compatible CD or DVD.
    I think you should first check if there is an ODD firmware update.
    On the Toshiba European page driver you might find updates firmware for different CD/DVD drives.

    You should check your CD/DVD drive and a compatible firmware is available, then you need to update this
    If there is no update firmware, then you must try different discs from different manufacturers to create a recovery disk.

  • Satellite Pro L300 upgraded to Win8 but I would like to update the drivers

    I have upgraded to Windows 8, but I found the Wifi adapter needs to be reset frequently (it seems to be without a cause) - Troubleshooting Windows 8 solves it by resetting the adapter, but I thought there will be a fix for this?

    When I tried to update the drivers I found that the L300 is not (in the not extensible or expandable lists)-is the L300 compatible in this respect by another model? Or can you suggest how to update all the drivers of Toshiba for this model.

    Thank you

    Your Satellite Pro is the model of laptop old enough and not supported for Win8.
    It is difficult to find drivers for the notebook not supported models and old.

    Problem is that if you make the decision to do so anyway you are on your own and can be all just lucky if everything works properly.
    > is the L300 compatible in this respect by another model?
    It is not easy to give you the right answer. What needs to be done is to compare each hardware component important as chipset, GPU, chip sound, LAN/WLAN with other models and see if some Win8 drivers are available. It is not so easy.

    For example: Toshiba Satellite pro L300 offers 4 different hardware platforms. One you have? What is the model number of your machine?

  • Satellite Pro L300 Windows 7 Upgrade - DVD player no longer works

    Hello

    I upgraded my Satellite Pro L300 Windows Vista to Windows 7 a few months back, now, I noticed the Player DVD no longer works! All ok in Device Manager, but the habit of reading anything.

    I have use a Toshiba Windows 7 upgrade disk that could be my problem. I used the Windows 7 Upgrade Advisor and Windows 7 Ultimate disc.

    I tried to download and install the latest Windows 7 32 bit DVD Toshiba drivers but still no joy.

    Can someone advise procedure I should follow to correct, if I need to downgrade back to Vista, hope not!

    Thank you.

    Optical disc drive is properly listed in Windows Explorer?
    Do you have problems with some specific discs?
    Original music and film discs are readable?

    What player you use to watch movies?

  • Satellite Pro L300 - Trouble you sign up for the free upgrade to Windows 7

    I just bought a Toshiba Satellite Pro L300 and informed me that I qualify for the free upgrade to Windows 7.
    However, whenever I try and enter the SN ID, I get the message "SNID not allowed!
    I left 3 messages with Teck Wah (the company that manages this update for Toshiba) and no return call yet.
    No idea how the model number and serial are supposed to be cited when I complete the registration form online?
    Thank you.

    Hello

    What Satellite Pro L300 laptop, you have exactly or let's say what is the model number of this laptop?
    I checked books upgrade of Windows 7 supported and only laptop PSLB9E is supported for this upgrade.
    Check it!

    Additionally, make sure that you typed in the right massword. Check this again once, maybe you have mixed up a few letters.

  • Satellite Pro L300 - 24L and VGA card update

    Hello world

    I just have a Satellite Pro L300 - 24L and want to update the VGA Intel 4500 M for a Nvidia Quadro 3D & CAD applications, possibly for the games now an then.
    Is this possible and what card can adapt to my L300 - 24L?

    I'm really a noob in laptop, so your advice will be welcome heart.
    Features: CPU T3400 - 4 GB 800 Mhz HARD drive - 250 GB - Vista Home Premium 64 bit

    Hello

    I want to say clearly that portable computers technology design is not the same as on the desktop and if you have a good experience with desktop computers, you'll know that upgrading the graphics cards is not so problematic, but on laptops, the situation is very different.

    Laptops design and construction doesn't allow such flexibility for upgrades, upgrading the graphics card is not possible.

  • Satellite Pro L300 - second defective memory Slot?

    Hi, I'm trying to install 4 GB of memory in a laptop Satellite Pro L300. This kind of thing, I did a thousand times before.

    However, every time I install a module of memory in the second memory slot, the laptop will be a blue screen when windows is loaded. Even running memtest (via bootable cd) will result in a block, so it is not for lack of Windows.

    I have the latest version of the BIOS installed (1.50)

    Each module of memory works perfectly in the main location on its own.

    With the help of a single module of memory in the memory secondary slot (even the original 1 GB module) translates the laptop does not even start.

    Is this a known issue? Or is it just a second faulty slot?

    Thank you very much!

    Maybe it's a non compatible memory module.

    What model of laptop you have exactly (L300-xxx)?
    What extra RAM you bought?
    Have you checked the compatibility?

    To be honest on this forum you will find many forums where people have described the same problem after upgrade. Most of these problems described was linked to the use of markets and not compatible good RAM modules.

  • Satellite Pro L300 BIOS update problem

    Hello

    I have a Satellite Pro L300 (PSLBHE).
    I downloaded the new bios and started the upgrade file. A window appears and shows the version of the old and new bios (v1.70-> v2.20). All in 1 min. my laptop computer screen turned black but the green light flashed HDD and does not what it is about 15 minutes. After that I pushed the power button and the judgment of the laptop. Now if I push the power button nothing happen just blank (black) screen and HARD drive flashing.
    What is the problem? What can I do? Please help me.

    Gjon

    It's the BIOS update is finished now. Of course, the BIOS update was interrupted and now of the BIOS chip is damaged.
    What can you do now?
    Unfortunately not much. What you need is a professional help, so I recommend you contact the closest service Toshiba and ask for help. I'm sorry.

  • Satellite Pro L300-156 - WLAN connection drops every 12 hours

    Hello!

    I have a short model "Toshiba Satellite Pro L300-156" (PSLB1E).

    The system state is:

    I used the recovery CD (to install Windows XP and other software on this CD).
    I've upgraded to the latest version of the BIOS (1.50, 10/07/2008) for my laptop and I downloaded all updates for Windows XP.
    I installed the latest WLAN driver for my WIFI (Realtek RTL8187B) card.

    The problem is still there:
    Every 12 hours (exactly on the minute!) drops connections.
    Not only the Internet, but the local connection.
    It is even a kind of matrices.

    Both a connection to a local computer and "mIRC" (ssh/telnet-program) to "PuTTY" (program-chat-IRC) says "network error caused abortion of software".

    These ping connections not, they die instantly in a tenth of a second.

    Hello

    I guess it can be caused by a 3rd third party tool that was installed on your laptop.

    I mean it of really strange that disconnected EXCATLY after 12 hours of use.

    "I have goggled a bit for the message: network error: Software caused connection abort."
    And found that this error is displayed if the Windows network code decides that your network connection is dead. This will happen when you remove the cable network Ethernet-connected computer, or if Windows has any other reason to believe the entire network has become unreachable.

    I think you should check the settings of your WLan router. My router refresh / disconnects after 23,59 hours to ensure that the IP address has changed.

Maybe you are looking for