How can I write protect a USB

Similar Questions

• How can I password protect my USB port?

  Hello

  I use Windows XP SP 2. I want the password protect my USB port so that whenever I plug in a device, like USB flash drive, modem, USB etc key, you are prompted for the password which will protect my computer against unauthorized individuals to use my USB port and helping to prevent the intrusion of virus. How can I put the password in my USB port? This is not possible in Service Pack 2, then I'm ready to upgrade to Service Pack 3. Thank you.

  If you want to protect your USB with password if you have lost your pen drive it contains the password, then you can use bitlocker to go. But for USB itself and also to protect the material you may have a look at:

  http://TechNet.Microsoft.com/en-us/Magazine/2007.06.grouppolicy.aspx

  However, I expect that some third-party tools may be able to do.

• How to remove write protection to move music from or to a usb storage

  How can I remove protection against writing so I can move music from a usb on a sd card storage?

  Usually there is a lock switch on the card itself. Take a peek.

• How can I write a DVD blu - ray on a mac?

  How can I write a DVD blu - ray on a mac? I tried a blu - ray burner and (if necessary) the software to use.

  I found the BE14NU40, BD playback/BD write LG, but I don't know if it's Mac compatible.

  Can anyone advice a good burner + software?

  I used one of them for several years and it works very well with Mac:

  ta-drive-solution-blu-ray-6x-dl-dvd-r-rw https://www.MacFixIt.com.au/OWC-mercury-Pro-super-multi-blue-Blu-ray-external-SA...

  Al

• How can I write a letter in french with Pages

  I use my computer in English, and I have to write an essay in french

  So, how can I write a letter in french with Pages

  Hi Luke,.

  If you are familiar with the French keyboard layout, you can move from the keyboard to this provision.

  If not, you can acess of the accents you will need the English KB layouts using (for example) option-~, then press e to e, or -e option, then press e to e. see the viewer keyboard for other options. Open the keyboard Viewer, and then press option key to display the keys to use for each accent.

  If all the accents you need are not available from an English keyboard, you can still list a French KB language as a 'second choice' and switch to it when you need an accented letter.

  

  

  

  Choice of the keyboard are defined in system preferences > language and text > input sources. If you choose more KB a page layout, the entry menu (a flag) will appear in your menu bar. The indicator shows the currently active KB.

  Kind regards

  Barry

• Satellite Pro M30: How can I write on a CD 900 MB?

  Hello
  How can I write on a CD 900 MB, I use nero 7 and nero on what they told me I have to update my firmware CD writer questioned. I got satalite pro M30 and windows XP SP2.

  Hello

  I found this firmware on the Toshiba driver page:
  http://support.toshiba-tro.de/Tools/updates/DVD-r-RW-firmware/SD-rxxxx/frmwre-na.zip

  But I m not 100% sure if it works.
  You can also try to search the FW on the driver page.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

• How can I write a digital waveform to the digital output (traditional DAQ)

  Hello

  I use a NI 6023e, PCI, with 8 digital outputs. I generated a digital waveform. How can I write for a specific digital production line now?

  I only have Labview 7, so I can't use DAQmx.

  Thank you very much

  
  

• How can I write my results to Excel in a perticular line sheet?

  Hi all

  I'm new in labview and I have a problem.

  I found my results, it is in the 2D array... He sometimes in 1 d array because I want to remove the header line.

  How can I write my results one by one in the row following on it?

  Hereby, I have attached the excel sheet where I write my results.

  There are about 25 result so I have to run my VI 25 times but the result appears in excel sheet in 25 succeeding row.

  hope you find my question...

  Thank you

  Ok..

  I'll probably do...

• If I have floating values such as 6.3 6.7, 6.9, 7.1, 7.2, how can I write a case statement to handle this

  How can I write a case statement if I want a case for x< 1.5;  ="" a="" case="" for="" 1.5=""><= x=""><= 3.7; ="" case="" for ="" 3.7="">< x="">< 7.2.....etc.  ="" my="" input="" is="" a="" floating="">

  Thank you.

  You don't seem to have set rules on inclusion, but I often use the function in the range and Coerce in these cases.

  

• How can I write the value of floats Unitronics vision230 PLC with modbus Ethernet

  How can I write the value of type Float in unitronics PLC Vision230 modbus ethernet (Ethernet Master Query.vi MB) usinsg I read and write register 32 bits, for example, I want to write the value 23.45 2nd Add. MF. And registry MF is the 32-bit registry. I read and write register 32-bit.

  Narendra.

  Narendra,

  Two characters can type cast into a uint16 you VI supports.

  To summarize. Take one (4 bytes). Flatten it to a string (4-byte) divided this string into two parts of 2 bytes each. Cast in u16 (16 x 2 = 32-bit).

  However, if you really want to follow the IEEE standards then you will need refer this KB. His is not that simple, but seems closer to what you are looking for.

  Amit

• How can I write in a table cell (row, column appear) in a databae?

  How can I write in a table cell (row, column appear) in a database using LabVIEW Database Toolkit? I use Ms Access. Suppose I have three columns in a table, I write 1 row of the 1st column, then 1st rank of the 3rd column. The problem I have is after writing the 1st column of 1st row, the reference goes to the second row, and if I write in the 3rd column, he goes to the 2nd row 3rd column. Any suggestion?

  When you perform a SQL INSERT command, you create a new line. If you want to change an existing line, you must use the UPDATE command (i.e. UPDATE tablename SET column = value WHERE some_column = some_value). The some_column could be the unique ID of each line, date and time, etc.

  I don't know what is the function to use in the Toolbox to execute a SQL command, since I do not use the Toolbox. Also, I don't understand why you don't do a single INSERT. It would be much faster.

• How can I write a whole byte to a port of digital I/o on a NI7340

  I was able to find a Port.flx of e/s from reading that allows me to read all 8 bits at a time. I can't find a Port.flx VI e/s writing. How can I write all 8 bits at a time?

  Take a look at the value of MOMO.flx of I/o Port. Here is general information about DIO with Motion and here an explanation on the Protocol of MOMO (should we need to Off).

• How can I disable protection of the customer

  How can I disable protection of the customer

  Hi pitellu,

  ·        What antivirus do?

  ·        Is it avant-garde or Microsoft Security Essentials?

  You could disable by using the parameter unless there is that a policy applies by administrator preventing turn he took.

  You can turn on or turn on the firewall in Windows XP, please see the link below:

  http://support.Microsoft.com/kb/283673

  Thank you and best regards,

  Imran M - Microsoft Support

• How can you write a resume using windows Vista Home Basic?

  How can I write a resume using windows Vista Home Basic? I put t have microsoft word or office.

  Start menu -All Programs - Accessories - Wordpad.

• How can I download an lg usb modem on the windows site?

  downloads

  How can I download an lg usb modem on the windows site?

  How can I download an lg usb modem on the windows site?

  Your question makes no sense. How anyone can download a modem?