How can super impose type on an image; whenever I have placed the type on my photo type in text box moves outside the image I don'tthink I have text wrap on?

Why can't impose a great guy on my picture?

Click on the image and go to window > text wrapping to open the skin palette. If something other than the article that I circled is selected, pass the circled point. This is the setting where no dressing is applied to the image. If this does not work, check if there is another object that is in contact with the text block. Maybe it's something that's behind the image, or perhaps on another layer.

Tags: InDesign

Similar Questions

  • How can I make a tab by default whenever I have connection to the portal of the webcenter spaces?

    Hello

    I have a single page in the portal of webcenter spaces, which is the default portal in the webcenter application. This single page has 6 or 7 like Home tab and the other tabs. Whenever I logged in the webcenter I can see the url redirects to my default portal but it doesnot get home tab made, instead, it shows the tab where I left just before disconnected tab.

    For example I have tabs A, B, C, D etc... I have logged in to the application portal and I did something in tab C and then I logged. After once again I re-login, I see this tab C shows, but I want to see that tab must be returned. Someone help me how to make a tab by default whenever I have connection to the webcenter portal.

    Thank you

    Ashok Laura.

    Hello

    This is an expected behavior as his persists the State of users. I did face this problem before and solved by setting the disclosed condition of showditailitem programmatically.

    Please check below the code for your reference.   Invoke the bean managed prior to the loading of the page to

    {} public void onPageLoad (PhaseEvent phaseEvent)

    If (phaseEvent.getPhaseId () .equals (phaseEvent.getPhaseId (). RENDER_RESPONSE)) {}

    If (!.) {AdfFacesContext.getCurrentInstance () .isPostback ())}

    If (this.newsPanelTab! = null) {}

    List childUIComponent = this.newsPanelTab.getChildren ();

    If (childUIComponent! = null & childUIComponent.size () > 0) {}

    for (int i = 0; i)< childuicomponent.size();="" i++)="">

    If (childUIComponent.get (i) instanceof RichShowDetailItem) {}

    If (i == 0) {}

    ((RichShowDetailItem) childUIComponent.get (i)) .setDisclosed (true);

    } else {}

    ((RichShowDetailItem) childUIComponent.get (i)) .setDisclosed (false);

    }

    }

    }

    }

    Thank you
    Amey

  • Inadvertently, I had a graduated filter changed all 326 images in my folder. How can I remove this change of images without affecting other types of changes, I did for the other images?

    Inadvertently, I had a graduated filter changed all 326 images in my folder. How can I remove this change of images without affecting other types of changes, I did for the other images?

    Select all images, ensuring that you are in the develop module. Auto-Sync lights up and then just delete the graduated filter. You will need to activate the graduated filter tool and click on the PIN for the filter you have defined and then press the delete key. Then, you want to disable automatic synchronization. Now, just highlight the image you want to add the graduated filter and do your thing with her.

  • How can I save a directory or a specific file without saving the Image to the system?

    Purchased new software my company insists on the fact that we back up software data every day on a USB. I tried to schedule a backup, but I don't want the Image of the backup system. How can I save a directory or a specific file without saving the Image to the system?

    When you choose what to back up, simply uncheck the box of system image:

    Or another simple way is to program a command that copies the files on your USB key, replacing the backup from the night before.

    For example, this command copies all of my 'Project X' folder on my USB drive (drive E :)

    copy 'c:\project x\' e:

  • I just started a new account. How can I claim 10 free stock images?

    I just started a new account. How can I claim 10 free stock images?

    Hello

    Details of the promotion here available – Royalty free images, pictures and graphics. Adobe Stock

    Thank you

    Bev

  • How can I add a polygonal printable image to an image?

    How can I add a polygonal printable image to an image?

    vinnyd45 wrote:

    How can I add a polygonal printable image to an image?

    The cookie cutter tool has various forms of cultures. One is a polygon: the icon is all black

    1. Open your image file
    2. Activate the cookie cutter tool, select the shape, drag out and using the move tool, position it accordingly. Engage
    3. Press CTRL + the thumbnail of the layer (not the name) in the layers palette to load the selection
    4. Go to the selection of Edit > Stroke (outline). Select the color of the race, put it inside, do 10-15px wide. OK, it
    5. Use the COP tool paint to fill the transparent area.

  • How can I sync 2 sony AVCHD images from the camera on the "date" as a prelude and import it in first pro?

    I have 2 sony camera popular with the AVCHD file structure. The two cameras are the same. How can I sync 2 sony AVCHD images from the camera on the "date" as a prelude and import it in first pro? Im working with 6.0


    Now I see the date taken in the import screen until I click "ingest". When in the trash, this option is there, but no metadata in there. It is therefore impossible to import images from two cameras and have these sorted.


    How can I get this sorted out before, so I can export for the first?

    Thank you. Tom van den Dool

    Hi Tom,

    How can I sync 2 sony AVCHD images from the camera on the "date" as a prelude and import it in first pro? Im working with 6.0.

    Sorry, you can not do as a prelude. You can request a feature here: http://adobe.ly/feature_request

    Thank you

    Kevin

  • How can I mount types defined by the user of the package?

    I have two types of similar packages (gt_Teste) in two different packages.

    How can I mount types defined by the user of the package?
    (I shouldn't want to made a new statement va_Teste2 pkgl_lu2.gt_teste due to the desire to increase memory allocation)

    ------------------------------------------------------------------------------------------
    -ANONYMOUS BLOCK
    ------------------------------------------------------------------------------------------
    declare
    va_Teste pkgl_lu1.gt_teste;
    va_Teste2 pkgl_lu2.gt_teste;
    Start
    --
    pkgl_lu1.prcl_init (va_Teste);
    pkgl_lu1.prcl_print (va_Teste);

    +/*
    -I don't want to do it because of memory allocation:
    Because me in va_Teste.First... va_Teste.Last loop
    va_Teste2(va_Teste2.Count+1): = va_Teste (i);
    End loop;
    */+

    pkgl_lu2.prcl_print (CAST (va_Teste AS pkgl_lu2.gt_Teste));
    end;
    /

    ------------------------------------------------------------------------------------------
    -PACKAGE PKGL_LU1
    ------------------------------------------------------------------------------------------
    create or replace package pkgl_lu1 is
    type gt_teste is table of index varchar2 (100) by simple_integer;

    procedure prcl_init (pi_teste in out nocopy gt_teste);
    procedure prcl_print (pi_teste gt_teste);
    End;
    /

    create or replace package body is pkgl_lu1
    ---------------------------------------------
    procedure prcl_init (pi_teste in out nocopy gt_teste)
    is
    Start
    pi_teste (pi_teste.count + 1): = 'A ';
    pi_teste (pi_teste.count + 1): = 'B ';.
    pi_teste (pi_teste.count + 1): = 'C ';
    pi_teste (pi_teste.count + 1): = ';
    end;
    ---------------------------------------------
    procedure prcl_print (pi_teste gt_teste)
    is
    Start
    I'm in pi_teste.first... pi_teste. Last loop
    dbms_output.put_line (pi_teste (i));
    End loop;
    end;
    End;
    /

    ------------------------------------------------------------------------------------------
    -PACKAGE PKGL_LU2
    ------------------------------------------------------------------------------------------
    create or replace package pkgl_lu2 is
    type gt_teste is table of index varchar2 (100) by simple_integer;
    va_teste gt_teste;

    -procedure prcl_init (pi_teste in out nocopy gt_teste);
    procedure prcl_print (pi_teste gt_teste);
    End;
    /

    create or replace package body is pkgl_lu2
    procedure prcl_print (pi_teste gt_teste)
    is
    Start
    I'm in pi_teste.first... pi_teste. Last loop
    dbms_output.put_line (pi_teste (i));
    End loop;
    end;
    End;
    /

    I see, well it's unfortunate bloody.

    Ideally you would have a package (utility package or something) with objects like that, that can be shared between the development environment, unless you never have an interface code (each package is entirely distinct from all other packages, and honestly, it's not likely to happen).

    I guess that your only option (I think) If you are concerned with memory usage would be to remove the table while assigning a new.

    For i In va_Teste.First..va_Teste.Last
    Loop
      va_Teste2(va_Teste2.count+1) := va_Teste(i);
      va_Teste.DELETE(i);
    End Loop;
    
  • How can I get rid of several clear green empty frames in the video that I just imported to iMovie?

    How can I get rid of several frames white green clear in the video that I just imported to iMovie (9.0.4)?

    I can not just delete them because this would create a rupture in the audio (I need) that will

    along these blank frames. What 'stretching' the last good image while keeping the audio?

    Thank you for all the ideas, your time and patience. I am new to editing.

    W.W.

    Have you tried to add a freeze frame to the position of the last good image?

    Place the cursor in the timeline panel on the frame that you want to extend, and then ctrl-click, select 'add a free framework '. Adjust the handles to resize the fame of gel.

    How can I get rid of several frames white green clear in the video that I just imported to iMovie (9.0.4)?

    You use iMovie 9.0.4 or the imported movie created in iMovie 9.0.4? I don't know what version you are currently using.

  • How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?

    I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.

    I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).

    In the document:
    High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
    is written:
    Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
    The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

    How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
    With what other subsystem on the device can generate a source of the clock? How?

    It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
    Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
    DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
    initialDelay, freq, the duty cycle); works

    But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
    DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
    initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock

    The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
    Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
    DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
    DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task

    But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
    DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
    DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0

    Hi datafriend,

    using what it says is correct:

    Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
    The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

    This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.

    There are also 2 ANSI C examples in this regard:

    http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485

    http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488

    So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)

  • How can I create a slide show 100% width, but have the caption in different positions for each slide.

    How can I create a slide show 100% width, but have the caption in different positions for each slide.

    There is placement of the legend only one for all the images in a slide show.

    The slideshow widget is specialized to create slideshows of the image. The widget of composition is a much more flexible widget which allows any combination of images and text in the trigger containers or containers of target of the widget. A widget of composition could be used to create a slide show with several legends by image and/or legends of different places for each image. The disadvantage of the widget of composition is that, due to the nature flexible widget, very little is automated for you and so it is much more intensive work to create a slideshow of images using the widget of composition.

    Thank you

    Sanjit

  • How can I say ios10 music playing ONLY what is loaded on the phone?

    How can I say ios10 music playing ONLY what is loaded on the phone? There was a way under ios9, but I can't find anything on ios10. When I shuffle a kind (like ROCK that has only 4 artists, I chose it), I want to shuffle only what is loaded on the phone, not what's on my mac (in the cloud)... I load only a few artists both because of space constraints. I have over 200GB of music on my mac...

    I don't want to see the playlists and artists who are not loaded on the phone either, but I can't find how to solve either!

    Launch the music application and go to the library > music downloaded. This shows that what is stored locally on the phone.

  • I downloaded an application from my iphone and then deleted. Now when I open AppStore I purchased apps and its still there. How can I remove it from there though even I have no more app?

    I downloaded an application from my iphone and then deleted. Now when I open AppStore I purchased apps and its still there. How can I remove it from there even if I have no more app?

    The applications that you have downloaded will be available for re - download also a practice.

    Apps y cannot be removed, you can hide only.

    Read here: hide and expose the purchases made on the iBooks Store - Apple Support, App Store or iTunes Store

  • How can I make Apple sent an official request for Andorra in the list of international codes?

    Apple acknowledges that Andorra Telecom (Mobiland) is an approved operator.

    However it does not include the international dialing code of Andorra (+ 376) in the list of phone prefixes in the country.

    This prevents verification services, such as in two steps and two-factor authentication.

    How can I make Apple sent an official request for Andorra in the list of international codes?

    Thank you.

    Return of goods - Apple

  • How can I restore iTunes a large number of items currently in the Recycle Bin?

    How can I restore iTunes a large number of items currently in the Recycle Bin?

    See if the menu in iTunes to undo option is available.  If it is not, go to the Recycle Bin and drag the files into the folder automatically add to iTunes.  iTunes 9: understanding the "Automatically add to iTunes" folder - http://support.apple.com/kb/HT3832 - files placed in this folder are actually moved from this folder to the correct location in the iTunes Media folder.

Maybe you are looking for

  • I can't open recently "shut down windows".

    As I looked up and accidentally closed my other windows, I go to history and click on "Recently closed Windows" but it didn't pop up. I tried to uninstall and reinstall, opened and closed several times, and reboot, but it did not work (oh but it's ju

  • How the * can I get rid of Yahoo search - Firefox still refuses my changes at the next startup.

    Work in Win10.Firefox refuses to keep the changes I made to remove Yahoo.Remove all browsers except Google - next time you start it again Yahoo!No other browser has been replaced, with the exception of Yahoo. It's very 'big brother', which I don't ex

  • How to load files from cod?

    Watch out for the upcoming noob question! OK, so I finished my first project, now, I went to the project-> build and got some files: cod, jad, jar and a few others. How can I transfer it to my phone (Strom 9500 or Curve 8300)? What file can I transfe

  • Entry of the appellant does not

    When a caller is sent to a greeting of unity and the appellant of entry is selected as 'allow callers to enter the directory number when wishes' is selected, nothing happens. When you hit a figure during the welcome, nothing happens. Any ideas? Thank

  • I would like to print envelopes on my 8600 officejet n911a a7.

    There is not a "custom" menu drop down size option. I've owned a lot of HP printers and always been able to do this.   I use windows xp, word 2007 Thank you very much for your help!