How can you find your old messages?

Similar Questions

• How can you find your restrictions password if you remember?

  How can you find your restrictions password if you do not remember?

  Read How to reset the forgotten password Restrictions with iPhone restore?

• How can you find your wep or wpa key to go on the internet I have a linksky route

  on the internet, computer wife XP runng had no problem, then when it turned on today that it asks for the wep or wpa key and I don't know what it is.

  Hi WILLIAMBERGEN,

  In a wireless network, the WPA key is a password that protects the network against outside intrusion. If a wireless router is configured with WPA encryption, you need the WPA key for access to the network and to make changes to your network settings

  We will check if the following is useful.

  a. open your web browser. In the address bar, type http://192.168.1.1 and press to enter. It is the default IP of many wireless routers. If this does not load a web page, see the manual of your router to the IP address of the configuration.

  b. on the screen that appears, you will be asked to enter your username and password. If you do not know your user name and password, try the default name of the user and the password of your router.

  c. If you are unable to log in or search for the user name and password of your router, reset the router.

  d. in your router settings, look for a "safety" or "wireless security" tab open this tab and the WPA key should be displayed.

  You can contact the support of router for more information.

• How can I find my old MSN hotmail account now that I have Windows Live Mail?

  Original title account: MSN hotmail

  How can I find my old MSN hotmail account now that I have Windows Live Mail?

  Hi Darlene Hogan,

  Check if the help article

  Windows Live Hotmail Top issues and Support information

  http://support.Microsoft.com/kb/316659

  For a more specialized on issue of Windows Live Help, post your request here
  Windows Live Forum - http://windowslivehelp.com/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• How can you transfer your bookmarks to a new PC?

  It's a simple question!
  How can you transfer your bookmarks to a new PC?

  Thank you
  Marie Pierre

  http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

• How can you correct 0x8dddooo4 error message

  How can you correct 0x8dddooo4 error message

  What's next for security/antivirus installed; is it's subscription and current definitions; has whatever it be detected by it when the system was analyzed last?

  Malware does not reside on the system or you need to read this Microsoft KB article:
  Error that you see in the upper right when you visit the Windows Update Web site on a Windows XP-based computer: "[error number: 0x8DDD0004]."

  All the steps in the above article can be made by downloading, recording, then by running the Fixit of: How to reset the Windows Update components?

  Once the download is complete, close all open programs and web browsers.
  Then, run MicrosoftFixit50202.msi and choose it is the default mode.

  The default mode performs the same steps as shown in the article first, KB914224 and that someone at Microsoft should edit this page so that it refers to the Fixit.

  Please note that if the malware resides on the system, then the components of Windows may updates reset / will fail or just temporarily fix the error code, what malware is.

• How can you save your pictures on a disc using photoshop 13?

  How can you save your pictures on a disc using photoshop 13?

  It depends on your computer and the write speed of your disc burner.

  Try to bring in smaller batches; see if that helps.

• How can you save your illustration in Photoshop CC 2014 as PNG or JPEG file when it does not give the option?

  How can you save your illustration in Photoshop CC 2014 as PNG or JPEG file when it does not give the option?

  Thank you for your time and help in advance.

  Thanks for the reply. I have actually managed to do work. I had my work instead of 16 or 8-32 bit/channel value. Once I changed it to 16-bit/channel, he gave me the possibility to register under the registered name. Thanks again.

• How can you find a timecode for the chronology of the hand... in the nested sequence?

  How can you find a timecode for the chronology of the hand... in the nested sequence?

  The opposite seems easy, but I often put the CTI on the main timeline in the hope of finding the exact location of the nested sequence.

  Thanks for all the ideas.

  It is CS3 help, but that's what you're looking for?

• Help, please! How can I find an old classic ipod on my itunes?

  I had an old ipod classic 160 gb I got in 2007. I had a ton of music out there. I have not updated it or she synchronized for years, but I lost it and need to find on my itunes to my insurance company.

  I can't find it there anywhere and I'm worrying as have not received or pictures due to age.

  Is anylne know how I can find my ipod? Or they remove after awhile? I checked the thing but it only shows my partners new ipod and ipad.

  Thanks in advance,

  JO

  If it is not listed at https://supportprofile.apple.com/ then I think you're out of luck when it comes to making a claim on your insurance. I guess you could try good sieving your online banking records, assuming you have them and they return which until now.

  TT2

• How do you find your WAP passphrase

  I need awap passphrase for my new wireless printer.  Where is the ist / how do I find it?

  Hi Lynn,

  It's the security of wireless encryption and it is located in the Security section of the configuration of your wireless router settings (even if it is probaby not displayed and requires that you know - a bit like a password).

  Connect to your wireless router, check the configuration for the single SSID (your wireless connection name) and go to the section of security configuration to set security wireless to the router with a key (or to change the key, but you may need to know that to change to a new one - although you'll see below that I didn't need to know the old man) and if necessary (and it will) , type the key in the laptop / printer setup that it connects to the router. You will not be able to access this key if the computer after an entry - it's just to establish the ability to connect. There is an empty space where the key was seized, but it converts the real key to a string of points, so it cannot be read. If you change the key through the router, you can change the key through the computer by putting in new and once registered, it will work (but will return again to a chain, so you can not read or the other).

  To configure the wireless router read his extended manual or go online and check on the site Web of the manufacturer, forums, and/or technical support. I am not quite sure, but if you can connect to the router configuration pages, you can probably change the key and I do not know if you will need to know the old key to set a new or not - it may work or it may not it can vary depending on the router. If your login details are forgotten, the router can be reset and reconfigured with the default settings - but you will need their help to do that besides the default settings usually use passwords and logins by default. Many use admin or administrator as the default user and admin or administrator name or password as default password. Once you have access, look for where the key is together and see if you can change it without knowing the old key (or in your case, just be able to see it) or knowledge how do them before you let them in off the line. In some cases, your ISP's technical support group can help you with this if they know and support this particular router.

  It is usually open your browser and where you would normally type an address (of course everything connected to the network), instead of typing 192.168.1.1 (or whatever your default gateway which is in such a situation the address for the wireless router). If you do not know (and I've used just which is the most common failed) but can still access the network, and then click on start / all programs / accessories / right-click on command prompt and click Run as administrator then type IPCONFIG/all and enter and look for the wireless connection and the IP address of the router should be the default gateway (and often also the DNS server IP and the IP Address of the DHCP server as well). Use whatever it says in your browser to try to access the router. I just checked my (a Lynksys) and after that enter the IP address he gave me access after asking for a user name and password and, to my great surprise and you'll be happy to hear, when I went to the wireless security section, he showed me the security key (not a lot of points, but the actual key).

  I hope this helps. I know the procedure in the works of the previous paragraph for me, as I did just to confirm, but I'm not sure what you have equipment or if it will work the same or if you know the user name and password to access the router configuration or how the key is set or displayed. Keep in mind that configure the computer for a wireless connection is typically more to just know the key but also to know the type of security used (for example the type of security and the encryption type and there may be many options for both and you don't want to be guessing). If this isn't the case, then if the router is still under warranty I would try the router support for help. If not, I would try the ISP technical support to aid first because he would be free, and they may be able to do. They could also mess things up to the point where you have no choice but to communicate with the technical support of the router group and to be unable to connect until it is resolved (or try their Web site technical support options or the support forums (which once occurred to me, but I had the Bill sent to the ISP because they were responsible for ruining it and was surprised that I never heard to)) New from these companies).

  Good luck!

• How can you find out how many KB in an e-mail?

  After I typed an email how can I know how much KB is in it before you send it? A person who I send e-mails is limited to 20 KB per email so I need to know that I've kept within this amount of kb of before sending it.

  I try this way to check the SIZE of my email.

  If add you attachments, then you can see the size of the attachments. not the size of the composed message.

  Try this

  • SAVE your composed message, then go to the PROJECT and check the size of your email.

• How can you stop your malfunctioing album covers?

  Just the day before I had an update I did on my computer.  I noticed after the update from microsoft that I was getting a malfunction in my windows media player 11.  So far, none of my music has dissappeared.  The question that happens is that a particular album cover is overridding another cover that is installed for the other albums art.  Other things that happens is some other album covers are either crushed any third-party that works perfectly with windows player 11. An analysis on my computer by microsoft and they gave me no entry as to why it happened.  I would like a really good answer for this problem.

  Hello Raytex111,

  Thank you for your message.  The issue of album art could be caused by a corrupted database file.  Please click HERE for instructions on how to remove the database file and allow it to rebuild itself again.  Regarding scanning you are referring, could you please be more specific as to what type of analysis has been made or when and how it was done?
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I need to make a banner 300 inches wide, but it is defaulted to 224 inches.  How can you make your plan of work greater than the maximum allowed?

  I ned to do a banner 12' high x 25 ft wide.  The default width to 224 inches.  How can I extend this to my width?

  As SRiegel suggested above - I would half work to make things easy for you. So, make your plan of work 6' x 12.5 then output the file to 200%. See also the note above from messages on images.

• How can you find the Dimensions of the mesh in DWcs5

  Hi, I can't understand how you can see the height and width of the cells in Dreamweaver Cs5, when you place the cursor in a cell he sometimes displays the height or width in the property inspector, sometimes you can understand the height or the width of the other cells around him but sometimes I need to know the dimensions of a cell and I can't find any way to know. It's really upsetting me, please help!

  Thank you very much

  Gareth

  Instead of making the images to "adapt to a table" why not create a table to ORGANIZE your images?

  some images here

  another picture here

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB