How create/reuse window pop-up with anchor point

Similar Questions

• Whenever I started my PC a window pop up with the massege to allow execution of "WDBtnMgr.exePublisher".

  Every time I started my PC a window pop up with the massege allow execution of "WDBtnMgr.exePublisher"... allow or cancell are option 2 for a year I have to work and I just press Cancel I didn't see any restraint on the performance of the PC.

  Hello

  ·         What operating system is installed on the computer?

  ·         Did you make any changes before the show?

  Follow the methods and check them off below if it helps:

  Step 1: Start in safe mode and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not persist in safe mode, then I suggest you put the computer in a clean boot and check if that helps:

  http://support.Microsoft.com/kb/929135

  Note: Reset the computer to start as usual by following step 7 from the link above.

  Step 3:

  Run the Microsoft safety scanner to make sure that the computer is free from virus infection:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• How to remove a path between two anchor points

  Hello

  everything is in the title,

  could you tell me please how to remove a path between two anchor points without using the tool Eraser path?

  When I select these two folders and press to remove all disappeared.

  PS: I want to keep the anchor after the removal

  Thank you

  with the Selection tool direct (white pointer), click the path segment (no points) or select slide above without going on something else and tap on delete.

• Problem with anchor points, shifts vertically in the browser view. What is the problem?

  Problem with anchor points, shifts vertically in the browser view. What is the problem?

  have you allowed for the height of your head? I had to put my anchor above my content by the height of the header, otherwise, the upper part of my content was hidden behind the header

• Personal warping of music with anchor points?

  I need to get a model of very specific chain with a musical score (2 measures). When I take the steps and back up I can use string functions that do not include a precise control. I would like to take 2 measures, like a 'flag' warp and twist with anchor points, but this does not seem possible. Any help?

  Make art artbrush out of it. Draw a curved line, and then apply to the brush.

  You can also refine a deformation of the envelope using the gradient mesh tool. But it does not work when you apply the deformation under effect. It only works when you apply good object > envelope.

• HP 15-n205tx: how to reinstall windows preinstalled 8 with more than one partition

  I use 15-n205tx laptop computer with windows 8.1 hp 64 bit pre installed now I need to re install the windows with extra partition only having a c volume now os and any other content is stored in a single volume
  so I need for us as a 2-volume one for data and one for the operating system how to do it please give me the procedure

  Hi @vipinuly,

  If I understand you correctly, you want to create an additional partition on the device.

  If you use provided Hp OEM OS image, it allows you to create the partition during the installation of the operating system.  You can add the partition after installing the OS, but this is not recommended by hp.

  You can create physical partition or volume with Retail OS image.

  Here are a few links to help to create an additional partition

  To create a partition or a logical drive:

  https://TechNet.Microsoft.com/en-in/library/cc727978 (v = ws.10) .aspx

  https://support.Microsoft.com/en-us/help/17418/Windows-7-create-format-hard-disk-partition

  NOTE: With the hp OEM operating system image, perform the recovery on the unit will scan the entire score and data as well as those. Therefore, we believe always take backup of data before you perform the recovery of the unit.

  I hope that answers your question.

  I am an employee of HP, the views expressed here are my personal opinions, not HP.

  Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.

  Click the "Thumbs up" button to the left side of my post to recognize the message *.

• How to use Windows media player with the windows Task Scheduler (7)?

  Original title: why it is so difficult... question of windows media player 12

  You want to use Windows media player with windows (7) Task Scheduler.   We have a pc, everything that appears on the screen is also pumped to our community cable channel, normally a slideshow in loop is the show, however, sometimes via a scheduler interrupt the slideshow to play a video (say a video of our last Board of Directors meeting) and to make videos, ideally the slideshow returns.

  Using Microsoft software, in this case, Windows Media Player v12.0.7601.18150, Task Scheduler 1.0, two things must happen.

  1 Task Scheduler launch a video in fullscreen / top of window.

  2. when the video is finished, wmp is closed.

  Well, 1 works fine.  The Task Manager launching wmp in full screen.  And a framework of wmp switches to allow a session of wmp be on top.

  However, a short time after launch wmp cut the screen down to a smaller version.

  And 2. closure of WMP fails to occur.  He remains on the screen waiting for human input.

  Any input appreciated.

  Charlie

  For "cuts WMP down to a smaller version", right click on the video game (during playback) and deselect ' auto Player size to contain video.

  For number 2, define your point of Task Scheduler task for the "end of task after X minutes" and therefore the value of X.  Then it will kill the instance of running Media Player after a large number of minutes.  So, it will absolutely immediately when the video is done playing, but it will be within 60 seconds and will be at least to remove WMP and let your slideshow be visible again.

• How to uninstall windows live messenger with windows 7 starter edition

  How uninstall windows live messenger has my computer windows 7 starter edition

  How to uninstall Windows Live Messenger in Windows 7:
  http://www.intowindows.com/how-to-uninstall-Windows-Live-Messenger-in-Windows-7/

• How to get pps attachments open with Power Point, they did, now, they are not

  All attachments that have been elements of power point, allows to open with Microsoft Office Power Point, now, they are trying to open with Microsoft Digital
  Image Starter Edition which does not.
  How can I get to open with PowerPoint again?

  Create a file association.
   
  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: PowerPoint.
  6. check: always use the selected program to open this type of file.
  7. click on OK.
   
  This should allow you to open these attachments directly from email address now.

• Help with anchor points

  After some research, I decided to open my own ticket and try and get this resolved, or at least learn more about the functioning of the anchor points. I wanted to design my Web site for people with monitors of resolution higher than most of the people have full HD monitors BUT frame the site it is also visible on a laptop computer that will be the smallest resolution, as I updated my page width 1300 pixels which, for me, does not seem over the top. Here is a screenshot of the layout of my site.

  If you notice that the anchor at the bottom left is aligned with the edge of browsers, but when you click on the link further down the page the page horizontally derivatives, but when I run physically scroll image if switches back to place, I would like to know if this is possible or if there is a better way to create a great site that allows people with higher to see more of my images resolutions , but not leave out people with lower resolutions.

  Edit: This is a quick edit to say that I have the selected page as centered in the page properties menu and I have Centre of the United Nations it seems to work fine but of course everything is left justified so I lose a few details on the left edge, just don't feel good

  Instead of using an image of 1300 create a rectangle of width and set your image as the fill for the rectangle. It will then adjust to the users screen but keep your content and anchors of tact and centered.

• I can edit the Bézier handles symmetrically with Anchor Point tool?

  In CC when using the pen tool on PC, I like the way that you press Alt and Anchor Point tool allows to modify Anchor Points and paths on the fly. But to convert an anchor point in the curve, the Bézier handles soar symmetrically compared to start but after letting go, I can only go back and modify the handles independently using this tool who loses the symmetry and therefore the sweetness in the anchor point

  Is it possible to edit the Bézier handles symmetrically using this tool after the initial conversion of the corner anchor to smooth?

  Thank you

  N °

  If you want to change the handles symmetrically, so that they are uninterrupted - direct face-to-face and the same length, you have to start over - drag - click on the anchor with the anchor Point tool.

  I don't think you should use the Alt key

  After that, assuming that both handles are uninterrupted, you can click drag with the direct Selection (white arrow) tool on the end of handles and the curve will remain smooth as handles to remain intact.

  so in short, use the direct Selection tool (press and hold Ctrl), if you want to change unilaterally, without breaking the 2 handles.

  Can be useful for checking-

  Edit > preferences > display the selection anchor > see Managing when several anchor points are selected

• Cannot resize with anchor points more

  When I select objects in Illustrator, I am no longer able to resize them by dragging anchor points. The area around the selected object appears even more, so I have to use the resize tool instead. Y at - it a setting or preference which will give the possibility to resize by dragging?

  is to show the bounding box your problem?

• Hello, I have Photoshop elements newly acquired 14 and wants to create a panoramic photo. I followed the instructions for: "create a panoramic photo. Here, a window pops up with: "You must first register documents, before you can merge them." What should

  Hello, I have Photoshop Elements 14 newly acquired and wants to create a panoramic photo. I followed instructions « to: " ""create panoramic photo.» " Here, a window appears with:" ",", you must first save the documents before you can merge them. " What to do ici? Où to save? The window is not in le Manual? Who can help me? Hi Thomas

  I can't work out how to use this part of the program either!

• Satellite L10-202: how to bring yellow pop up with the IP address?

  Hello
  I have the Satellite L10-202. When I bought it, it had already installed Windows XP Home. Of course, a few hours after I reinstall the software, but before I did I saw that when I plugged the computer to Internet/LAN by ethernet or WiFi NETWORK card there was yellow pop-up windows (sometimes called ball) with information which IP address, I received.

  Now, after the reinstallation, I only "information network connected.
  Anyone know how I can restore it? It is characteristic of some software on CD with the drivers or that certain configuration in operating system? It was very useful. I tried with almost all utilities on CD.

  Kind regards.

  Hello

  Maybe this helps:
  In the registry trying to change this entry:

  The key: NtVersion ntVersion\Explorer\Advanced

  Create a new DWORD value and name it EnableBalloonTips equal to 1.
  If EnableBalloonTips is already there and equal to 0, equal to 1.
  Quit the registry editor, log out and log in.

• How to reset Windows 7 password with USB

  The first thing we often do when we * password lost Windows 7 * is to ask an it expert for help. However, it is only a moment for you * forget password Windows 7 * and it may take you several days to regain access to your system. Later, don't worry about anything when you forgot the password for windows 7. The article will give you some ideas for * reset password Windows 7 * with USB drive.

  * Chapter 1: Reset password reset Windows 7 password disk.*

  Most people know generally only how to create a new user with a password or change it. But they do not develop a habit to create a password reset disk to prevent the lost password. This is an excellent and free Microsoft gift. Click here to learn how to create the password reset disk in windows 7 If you loan have a reset disk, follow these steps:

  Step 1: Start or restart your computer, insert your USB key. In the home interface, press ctrl + alt + delete, enter the classic logon box. Then type the user name that you want to use and a wrong password or leave the field blank, and then press ENTER or click OK. It will show you logon has failed.

  Step 2: Click on * reset password *... it will show you the password reset Wizard. And it allows you to create a new password for your user account. In the password reset Wizard dialog box, click on * following *.

  Step 3: Select the disk that you insert, click on * following *. Type a new password in the Type a new password box, and then retype the password in the Type the password to confirm box. In the Type, a new indication of password box, type a hint for the password or no, and then click on * next * → * finished * and then try to open a Windows XP session again when to use the new password you just put.

  EC * USB password reset disk * use only in a certain account that you have created before, or it will not help. Therefore, it is best to create a password reset disk when you add a password to the account.

  * Section two: Reset Windows 7 password Windows password rescuer run from USB drive

  If you have not created a password reset disk for your account and unfortunately you lost or forgotten windows password, see below. I'll show you a guide step by step to do this task in minutes with USB, without reinstalling the system or loss of data.

  Step 1: Prepare a 2 GB USB flash drive and a computer that you can access.

  Step 2: Download Windows password of lifeguard and install it on a computer on which you have access.

  Step 3: Run the program and burn the ISO image to the USB Flash drive.
  * NOTE: * this action will make your formatted USB drive and all data in it will be lost. You would provide better with nothing in it.

  Step 4: Use the USB to reset the password of windows 7. Before this, you must set your start your computer by USB. Then start your computer and enjoy the process of resetting the password, it is easy and fast. Don't worry if you are struggling for the parameter, you can see more in the Windows bios password rescuer website.

  Posting of interest. Thanks for this detailed description and useful links.
  If you have more interesting things to share with us you are welcome.