How cretae package, the procedures and the trigers

Similar Questions

• How to package an application and install it on an alpha bb10?

  Hello

  Now, I can develop my application and running/debugging Momentics. I am trying to package the application and send the package to other trials, but, without for them to build the binary file again. How ever, I can't find documentation or discussion in this frum on how to do this?

  Could you let me know if it is possible and how? Thank you.

  Dong

  Place the DevAlpha in development Mode, then the command line

  blackberry-deploy -installApp -launchApp -device  -package .bar -password 
  

• How to perform this procedure and get the result?

  I created a procedure, the source code for the same thing is provided below.
  
  create or replace procedure vin_test (p_deptno in number
  p_cursor ON SYS_REFCURSOR)
  as
  v_res Emp % rowtype;
  Start
  Open the p_cursor FOR
  Select *.
  WCP
  where deptno = p_deptno;
  
  end vin_test;
  
  Now, if I want to see that the out put of this Proc
  I first put the Serveroutput on and then...
  Exec vin_test (10);
  I get an error message indicating an incorrect number of arguments, then someone can tell me what is the value of the parameter I should move on so that I can get the desired output.
  
  
  Thanks in advance
  OraCrazy

  In sqlplus you can do like this.

  SQL> create or replace procedure vin_test( p_deptno IN number, p_cursor OUT SYS_REFCURSOR)
    2  as
    3     v_res Emp%rowtype;
    4  begin
    5     open p_cursor for
    6     select *
    7       from emp
    8      where deptno = p_deptno;
    9  end;
   10  /
  
  Procedure created.
  
  SQL> var lcur refcursor
  SQL> exec vin_test(30,:lcur)
  
  PL/SQL procedure successfully completed.
  
  SQL> print lcur
  
       EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO        DIV
  ---------- ---------- --------- ---------- --------- ---------- ---------- ---------- ----------
        7499 ALLEN      SALESMAN        7698 20-FEB-81       1600        300         30         10
        7521 WARD       SALESMAN        7698 22-FEB-81       1250        500         30         10
        7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400         30         10
        7698 BLAKE      MANAGER         7839 01-MAY-81       2850                    30         10
        7844 TURNER     SALESMAN        7698 08-SEP-81       1500          0         30         10
        7900 JAMES      CLERK           7698 03-DEC-81        950                    30         10
  
  6 rows selected.
  

  Thank you
  Knani.

• How to package the application label/title?

  Hi all
  1. work on the version of BB storm (9500/9530 Simulator) is v4.7.0.75
  2 opportunity BB JDE v4.7

  3. signed request

  4. the request is:

  My label application is for example "SUE KARL"there 20 charectors. but on the device/Simulator I can see only 10 characters and reset displays as «...» «- ex: «SUE...» ». but when you focus on it you can see the full label on the top of the unit which is good.but

  My request is here:

  I want to wrap the label in the icon itself.

  any body can help me on this.

  Thanks in advance

  Ratna-

  @ Ratna, I sent you a private message...

  Well, Yes, as you say, it does not appear the full name, since there is no space... I don't know if this is a restriction, but it shows only up to 9 characters, after this point to point (...) comes...

  Thank you!

• Call stored procedures and using its output parameters in a report

  Hello
  
  I have a procedure defined in a package on the database. This procedure returns a number of output parameters. How to call this procedure and use the output parameters in my report?
  
  Thank you, Mark

  Depends on the level at which the procedure should be called. If its at the State level, call the form in the trigger-REPORT-BEFORE (or AFTER-PARAMFORM) and store the off-values space reserved columns. These you can use anywhere in your report.

• Procedure and settings

  Could someone post an example or a link on how to call a procedure and to pass a procedure, and how the procedure receives this settings?
  
  Thanks in advance

  Demos IN, OUT and ON the use of the parameter found in the demos in the Morgan Library in www.psoug.org. Search for STORED PROCEDURES.

• How to write a procedure to call and run the custom package backend

  Hi all
  
  Oracle 10g
  Oracle Apps R12
  
  I work with here oracle order management, we have a package called (Pick Release) to customize. Due to a problem, we have this concurrent program execution manually giving Route_id as parameter. The route_id comes from the road to the Table. By using this query
  
  Select distinct route@DB_LINK_APPS_TO_ROADSHOW route_id
  When trunc (route_date) = trunc (sysdate + 2).
  
  on a daily basis, we have almost 42 routes and we run this simultaneous program manually close times.
  
  so now how to write a procedure for this
  
  Step 1 make the route to the routing table. (By cursor we can get the route_id accordingly)
  
  Step 2 How to trigger custom backend package and run accordingly to this output of the cursor (route_id)
  
  If 40 routes of cursor get is - that the simultaneous program runs 40 times according to this route_id.
  
  
  can some could provide the steps to do this
  
  
  Thanks and greetings
  
  Srikkanth.M

  To submit a competing request from the back - end:

  FND_REQUEST. SUBMIT_REQUEST (Client or server)

  Summary

  function FND_REQUEST. SUBMIT_REQUEST

  (application IN varchar2 default NULL,

  program IN varchar2 NULL by default,

  Description IN varchar2 default NULL,

  start_time IN varchar2 default NULL,

  sub_request IN default boolean FALSE

  Argument1,

  argument2,..., argument99.

  Return to argument100 number);

  Description

  Submits a competing treatment by a simultaneous Manager. If the query is successful, this function returns the ID of the concurrent request; Otherwise, it returns 0.

  ATTENTION: FND_REQUEST needs to know information about the user and accountability whose application is submitted. Therefore, this feature works of concurrent programs or forms within the Oracle Applications.

  The FND_REQUEST. SUBMIT_REQUEST function returns the ID of the concurrent application after successfully. It is up to the caller to issue a commit to complete the application.

  Your code should retrieve and handle the error message generated if there is a problem of presentation (the ID of the concurrent request returned is 0). Use FND_MESSAGE. RETRIEVE and FND_MESSAGE. ERROR to retrieve and display the error (if the application is made on the client side).

  Related essays: overview of the Message dictionary (see page)

  You must call FND_REQUEST. SET_MODE before calling FND_REQUEST. SUBMIT_REQUEST of a database trigger.

  If FND_REQUEST. SUBMIT_REQUEST fails to go anywhere but a database trigger, database changes are cancelled until the time of the function call.

  After a call to the FND_REQUEST. SUBMIT_REQUEST function, installation of all parameters are reset to their default values.

  Arguments (input)

  short name of the application associated with the concurrent request for enforcement.
  short simultaneous program (not the executable) name of the program for which the application must be made.
  Description Description of the application that appears in the form of concurrent requests (optional).
  start_time time during which demand is expected to start running in the (optional) HH24 or HH24:MI:SS format.
  sub_request set to TRUE if the request is made by another application and should be treated as a subquery.
  From version 11, this parameter can be used if you submit requests for in a concurrent program of PL/SQL stored procedure.
  argument1... 100 arguments for the concurrent request; up to 100 arguments are allowed. If the Oracle Forms submitted, you must specify all arguments of 100.

• How to query the DDL lock functions or stored procedures and packages?

  Hello!
  
  The subject says it all: how to display existing DDL locks on the functions or stored procedures and packages?
  
  While running a procedure, it cannot be deleted or replaced, so there must be a DDL lock on it. The information does not seem to be in V$ LOCK or V$ LOCKED_OBJECTS.
  
  Thank you!
  Marcus
  
  Published by: David on November 21, 2009 15:43

  Hello

  You have the DBA_DDL_LOCKS view.

  Best regards
  Jean Valentine

• How to move the functions and procedures of packages in a schema?

  Hello

  I have less than the needs for a work at home and my question is if anyone can point me in the right direction to find documentation that can help me solve below. Any information will be appreciated. Thank you.

  Write procedures and functions (included or not in packets) as .txt or .sql scripts. Once they have been launched in Developer SQL they should, in addition, the functions and procedures of packages in the current schema. If the current schema contains only 2 packages, pac1 (p11, p12 procedures and functions f11, f12, f13) and pac2 (contains the p21 following procedures, p22, p23 and f21 and functions f21 (case of overload), running the scripts produce the following effects:)

  • Procedures p11, p12, p21, p22, p23, and f11, f12 and f13 functions will be created in the current schema.
  • PAC2 will contain 2 instances of the function of overload-f21; they will be kept in the package, without be created in the current schema. If all overloaded procedures/functions will be kept in their original packaging
  • If pac1 contains variables, cursors, and public types, keep us only the details of the package (and remove the body); usually if the packages contain no overloaded functions or procedures the body will be removed and if no variable, cursors, types of public then we will remove the header.
  • If in the triggers, procedures and functions we will call procedures/functions packages (procedures and functions moved into the current schema) they reference will need to be updated (via editing the body or recompilation) for example if pa1.p12 will be replaced with p12.
  • Scripts must have numbers in the next series (01... n) and the characters that explain the content.

  My only advice would be to remember that these are public forums and if YOU can find them, therefore cannot your instructors.

  In addition, those are horrible procedure names and function

  This mission seems to be around to overload the pl/sql objects and... prioritize a research on Oracle documentation around overhead and legacy
  http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28371/adobjplsql.htm#i21148

• How to check the column updated whereby the package or procedure?

  Hi all

  Can someone help me how to check the column updated by which the package or procedure

  A.Mahesh

  Hello.

  You can check what object is a reference to the table of the column:

  Select *.

  of all_dependencies d

  where d.REFERENCED_NAME = '. '

  And you can find all the links to the object source data column:

  Select *.

  of s all_source

  where s.name = "."

  and s.OWNER = '. '

  and s.TYPE = "."

  and as s.TEXT '%%'

• migration package to the procedure, how to use THE params

  Hi all
  We just roll back packages in the stand alone procedures and I starat have problems with syntax and OUT defintion, for example our body of package/East:

  create or replace
  PACKAGE          PACK_RYBA_INVENT AS 
    TYPE CURSOR_INFO IS REF CURSOR;
    -- FUNCTION DECLARATIONS
    PROCEDURE p_RYBA_GetALL (in_custom IN NUMBER, out_cursorINFO OUT CURSOR_INFO);
  END PACK_RYBA_INVENT;
  
  -- body
  create or replace
  PACKAGE BODY                   PACK_RYBA_INVENT AS
    PROCEDURE p_RYBA_GetALL (in_custom IN NUMBER, out_cursorINFO OUT CURSOR_INFO) AS
      BEGIN
        OPEN out_cursorINFO FOR
        SELECT id_comp, id_name, cust_profile   FROM tc_INFO
        WHERE id_comp = in_custom;
      END p_RYBA_GetALL;
  END PACK_RYBA_INVENT;

  It is sweet to cursor declataion, specify us its type in code 'run '.
  I'm still new to Oracle, and I have the problem with the compilation of my inside, do not know how to correctly, report Cursro or should I let its declation in Packge and referencing it from there? How better to give this slider out all statements within the procedure, what Miss me? and I want to use the 'Cursor OPEN FOR' approach if possible.
  

  create or replace  Procedure  p_RYBA_GetALL (in_custom IN NUMBER,  out_cursorINFO OUT CURSOR_INFO) AS
   TYPE CT IS REF CURSOR RETURN tc_INFO.id_comp%TYPE, tc_INFO.id_name%TYPE , tc_INFO.cust_profile%TYPE;
   CURSOR_INFO CT;
     BEGIN
        OPEN out_cursorINFO FOR
        SELECT id_comp, id_name, cust_profile   FROM tc_INFO
        WHERE id_comp = in_custom;
      END ;

  TX
  TR
  
  Published by: trento on September 21, 2010 14:25

  sys_refcursor is available on 9i, here is the sample code that I tried...

  create or replace procedure getAllHierarchies (oc_sysrc out sys_refcursor)
  IS
  BEGIN
   OPEN oc_sysrc FOR SELECT * FROM tstproduct;
  EXCEPTION WHEN OTHERS THEN
     RAISE_APPLICATION_ERROR(-20002,SQLERRM);
  END getAllHierarchies;
  

  Then the procedure is called in this way...

  DECLARE
    refCursorValue SYS_REFCURSOR;
    myRecord tstproduct%ROWTYPE;
  BEGIN
    getAllHierarchies(refCursorValue);
  
    LOOP
      FETCH refCursorValue INTO myRecord;
      EXIT WHEN refCursorValue%NOTFOUND;
      dbms_output.put_line(TO_CHAR(myRecord.product_id)||' '||myRecord.product_description);
    END LOOP;
  EXCEPTION WHEN OTHERS THEN
    dbms_output.put_line(TO_CHAR(SQLCODE)||' '||SQLERRM);
  END;
  

• Newbie - how to import the package, procedures, etc.?

  I used the "data export", the computer of the developer, expoty tables, export procedures, export Packages, etc. in a file
  SQL Developer.
  
  In Sql Developer, how to import tables, import procedures, import packages on my computer "REAL LIVE"?
  
  I want to copy the Package, the copy procedure, etc. 'computing Developer' to computer "LIVE REAL DATA?
  
  
  TIA
  Steve42

  If you have access to 2 databases of your sqldev client (and therefore have connections put in place for both of them), just run the export file obtained from the DB dev as a script (F5), using the connection to the production DB (drop-down menu at the top right).

  Have fun
  K.

• I have creative cloud but I can't find in the package lead Edge and I need it for some exercises, how do I get it, thanks

  I have creative cloud but I can't find in the package lead Edge and I need it for some exercises, how do I get it, thanks

  You can also download it via the direct link:

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

• Hey, I just wanted to buy a package complete apps for creative cloud every time that I enter the stage at the confirmation stage its tells me there is a problem procedure and I need to contact customer service

  Hey, I just wanted to buy a package complete apps for creative cloud every time that I enter the stage at the confirmation stage its tells me there is a problem procedure and I need to contact customer service

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

• How to add damage to already bought the package of photoshop and lightroom

  I bought the package of photoshop and lightroom in summer 2015.  I must add aftereffects.  How can you do this?

  Use the unique App option:

  Pricing plans and creative Cloud membership | Adobe Creative Cloud