How do a unchanging calculated date after save / submit

Similar Questions

• How RAC doesn't lose data after a crash of the Forum?

  I am a student at the exam 1Z0-432 (Oracle RAC 12 c Essentials) and I was wondering how RAC loses no data after a crash?

  I see that the data is updated in the Cache buffers (Global Cache), the redo data is written to log buffer, then the redo log files. If each instance has its own wire recovery and undo tablespace how other instances of know these data so immediately after a commit an instance goes down?

  Suppose we have a hardware failure and the scott user updated a line on my racdb2 of the instance and issues a commit, immediately after that the racdb2 instance crashes. Redo data are already in the newspapers of recovery, but not in data files, how the other racdb1 of the Forum know about this update?

  Is there a Buffer any Global redo?

  Kind regards

  Franky

  The reason for newspapers to restore an instance available to all other nodes in CARS.  When one of the instance crashes, surviving instances can access the content instance redolog crashed and apply the changes to recovery.

  http://oracleinaction.com/instance-recovery-RAC/

  http://logicalread.SolarWinds.com/how-Oracle-RAC-redo-and-rollback-are-managed-mc04/#.VaUXqvlViko

• How to activate the Guard Data after test on the backup database

  Hi all

  I have a plan for the test of standby database and this is my plan

  1. check the gap newspaper archive and transfer the logs to check if necessary

  2. stop the replication Data Guard

  3 stop Standby Database

  4 back-up Standby Database before the test

  5. starting Standby Database to test (and main database fixed by using the user and performs operations during testing)

  After trials and Active Data Guard

  1 restore a database to the standby since before the backup set

  2. start Standby Database in the mode standby

  3. check Data Guard

  I have a question. Can I use log archiving of primary to apply pending before activate Data Guard? or must reconfigure DataGuard to activate Data Guard after having tested?

  Thank you

  Hiko

  Yes you can do it.

  following the procedure below.

  1 apply the logs to archive left on the previous day.

  2. the database pending judgment.

  3. take backup controlfile and data files.

  4. start the database in the editing phase.

  5. turn on the standby database. 'alter database activate standby database'

  6. then do what ever you want to test.

  7. once it is filled the database ensures activated.

  8. restoration of the database from the backup.

  9. then start appplying archive of the last archive applied before the database was arrested.

• Using signature field, after save, submit button does not work

  Hello

  I'm experimenting with the digital ID for signing. I have the sign on the memory works fine. I'm now experimenting with the Signature field. When the user finishes the signature and saves the file, the buttons are no longer active.

  Is - will this work as expected? Is there a way to save the file and still submit by e-mail?

  Thank you

  MDawn

  I suspect that you have not created a collection of custom signatures:

  

  If you configure a new signature collection, you can select objects, such as the button, which is not locked when the signature is affixed.

  Example here: https://acrobat.com/#d=zYfWoMpI5j9CmHa57Ym9hA

  Hope that helps,

  Niall

• How do I load the data calculated in HFM

  Hi gurus
  
  1. how to load the data calculated in HFM?
  
  I extracted the calculated data and when I tried to load the data calculated in HFM is partially responsible, showing the errors you can not load data for parent members of the account, Custom personalized 1 4...
  Then I ran the consolidation to get the values of the parent company.
  Is there an alternative way to load the data calculated in HFM?
  
  Concerning
  Hubin

  Hi Hubin,

  Calculated data cannot be loaded in HFM manually, these accounts with calculated field data should be generated through the logic of the computation.

  And parent members also don't take the data they are parents for the sum of some basic level accounts.

  So just load the data for basic level accounts and make sure they are consolidated accounts of field, that there was no error and calculated accounts data automatically generates through the logic written in the Rules file.

  And after loading data just run the consolidation and sink also rules file in both cases to the work of the logic of the computation.

  Kind regards
  Srikanth

• How to recover data after restoring backup

  How can I recover my data (between 16 Feb to Apr 16) after I restored (backup-jan'16) wrongly?

  You have a backup of a date later than the 16 Jan that may have data between Feb and Apr?

  If so, restore that backup. What is an iTunes backup or a backup to iCloud?

• Firefox 4 does not save form data after sending form and pressing the previous button

  Firefox 4 does not save form data after sending form and pressing the back button... It's very annoying that it erases all data. It worked fine on FF3.

  See:

  • Firefox or tools > Options > privacy > History: "don't forget to search and form history."
  • Check if Firefox automatically fills in forms

• If I didn't save my iphone, is there a way I can get my data after restore?

  If I didn't save my iphone, is there a way I can get my data after restore?

  Unfortunately, no.

• How can I get the data view to display the same amount of time I save?

  I use the Sound and Vibration Measurement Suite.  In the data view, I display a graph of time, the power spectrum, the Color Map and the waterfall.  I am also showing strength in numbers group for several bands and doing cutting-edge research.  I record 100 ms of the transient wave.  In the data view, why the temporal plots show several seconds of data?  What determines how much time will appear in the data view?  More important, the power spectrum reflects the power for the entire of several seconds of data displayed?  Same question for power in the values of band and cutting-edge research.  I want to just this data displayed for 100 ms of the wave that I record.  So, how can I get the data displayed (waveforms) and power numbers come only 100 ms of the recorded wave?

  Finally, what is the best way to make account concisely the recorded data?  By slide numbers on the Documentation tab is not concise, because it comes with graphics, etc..  I tried save as ASCII/LVM, but I get a bunch of stuff intermiated I don't care.  Help?

  Hi TimRsandiego,

  SignalExpress is programmed to display graphs with default scales based on the type of action, it's reading. These scales and settings can be changed by right-clicking on the graph, and then select Properties.

  If you are interested to learn more about how to use SignalExpress, I would recommend checking out some demonstrations/tutorials on NI.com. You can find some of these demos at the following location:

  Let me know if you have any other questions.

  Kind regards

• I created a form using Acrobat DC and has not seen how constrain text input. For example, I want only the alpha characters in my name field, will not accept dates after 1930, ect. Where is this feature in the drafting of forms to create?

  How to create a text field to create a form to fill out from MS Word, who is obliged by using Acrobat DC form design? For example allow alphabetic characters only in this area. Or allow only the dates after 1920?

  Hi michaelg31489520,

  You can set properties for form field in Acrobat DC also PDF, Adobe Acrobat form field properties.

  If you want to implement all the constraints you can also use JavaScript.

  Kind regards
  Nicos

• How to change the page numbers after adding & save page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers

  How to change the page numbers after you add and save the page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers.

  These page numbers were initially created using Acrobat PDF header and footer.

  I have a 750 page pdf document that I've created.

  I have to sometimes the pages up and down after that I added the page numbers in the document by using the Header_Footer tool on the right column of tools.

  But after you save the document, if I get a few pages around, I can't go back and change the page numbers.

  I thought that the page numbers, as indicated in the header and footer must have changed automatically, but I guess that once its print, that it cannot be edited - is that, as what is?

  So I guess we should always first get a copy without numbers of pages before confirming the documents and the creation of an index.

  A way to remove these page numbers already there and add new page numbers.

  Its a lot of work to align 750 court documents and then realize that you must move some and then realize the page numbers cannot be changed and thus begin to do this all over again to compile which can take about 10 hours.

  My question is quite simple, but I hope that overall, I got my point. Sorry if I made it is too complex.

  If no simple way, want to know if anyone has another different tool or a few recommendations to better highlight what I'm doing wrong.

  Thank you for your review and response.

  You should be able to update with tools - Pages - header & foot-

  Update... It not work for you?

  If this isn't the case, then try to remove from this menu and then re - adding them.

  Tuesday, June 23, 2015 23:55, Fortune Mile [email protected]>

• How do I reduce the data file after the moving images to another data file

  All,
  
  I did a test of simepl to see how should I reduce my data file after the transfer of the objects thereof.
  
  I had an image in my data file USER_image, which is about 9 GB in size. I created the new data under the new tablpespace file and moved all the images in this new space of tables. So my old tablespace of image with its data file is now empty. At least there is not all user objects.
  
  Now I tried to resize the old datafile (USER_image) to a smaller value, but I keep this error
  "ORA-03297: file contains data beyond the value required to RESIZE.
  
  The file size is 9 GB and I tried to resize to 8 GB but it still does not allow me.
  
  Is it possible to resize a data file after moving all its purpose?
  I'm something wrong or missing something?
  
  Thanks in advance.

  If you old image tablespace is indeed empty (you need to run a statement against DBA_SEGMENTS to check) then you can bring it, data files included.
  After this, you can create a 'new' tablespace with the old name and desired data file sizes.

• No data after running Chkdsk. having files with dir0000.chd

  I ran chkdsk from property drive (drive E and F) option after some time I restart my pc and start pc done chkdsk. After that when I opened my drive I shocked that there was no data. In dos mode, I saw that my data was in found.0000 dir and there were dir0000.chd such as files and there are a lot of files like this with number.how can I get my data in original form.plz help

  Thanks in advance already solved my 2 problems.i u wait 4 your statement

  Hello

  1. don't you save the data before running chkdsk?

  You should support your data when running chkdsk. Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on that data will be lost.

  Now, you will need to use a third party software to recover your lost data.

  THIRD WARNING:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• How to access the file data of QML

  Hi all

  I save my data foler xml file after I have download from Server compnay.

  So I hope that I can access data foler to load the XML to display the list.

  Does anyone know how to set up the data source of the qml?

  {To ListView

  objectName: "objVehicleListView."

  dataModel: {XmlDataModel}

  Source: "file://data/vehicles.xml".<--  how="" to="" point="" to="" data="">

  }

  listItemComponents:]

  {ListItemComponent}

  type: "vehicle".

  {StandardListItem}

  Title:ListItemData.unitName

  Description: ListItemData.licencePlate

  status: ListItemData.vehicleOwnerName

  }

  }

  ]

  }

  I think that it is not possible to get the path using QML pure code. By using the code BBSJdev, you can get the path in C++ and export it to QML.

  Add the following code after the qml loading, but before creating rootObject:

  QDeclarativePropertyMap *filenames = new QDeclarativePropertyMap;
  filenames->insert("vehicles", QVariant(QString(
          QDir::homePath() + "/vehicles.xml")));
  qml->setContextProperty("filenames", filenames);
  

  Then you can use QML:

  ListView {
    dataModel: XmlDataModel {
      source: filenames.vehicles
  

• My ipad is disabled. How to activate ipad without data loss? I know the password

  My ipad is disabled. How to activate ipad without data loss? I know the password

  You can not. If you know the password, how the iPad become disabled? If the device is disabled, the content is not already available. The only way to recover the device is to restore. You can restore your last backup after that. Follow the instructions in this document support. If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports