Similar Questions

• How can I configure the vidio is dark?

  How can I configure the vidio when I used it it was dark and I do not see a menu so I can't go to tools?

  Can someone help me?

• Satellite A200-1AE: How can I configure the settings of buttons Dual Mode Pad?

  Hello

  I recently bought a Satellite A200-1AE. I tried to configure the default first button on my touch pad (lower left) so that I can fire up MSWord, but it did not work.

  Now every time I have set the mode button and press this button, that nothing not to pass - I lost practically this button.

  My question is how can I configure the mode button on the touch pad settings? Even if I was able to start a program by using the 3 buttons how can I modify these programs?

  Thanks for your help!

  p.s. I read the extended version of the manual for my laptop. There is no explanation of my problem - it says I should look "Synaptics Dual Mode Pad properties.

  I don't know where are these properties.

  Hello

  It s is not so difficult as you think, the properties of the synaptics are in the "mouse properties" of your "Control Panel" of windows. When you reach the 'mouse', then click on the "Advanced" tab and you should find a button 'Advanced functionality settings'.
  It could be that the button is not named as mine, but it must be identical.
  After clicking on it, you should look for this 'easy' Launcher in one of the tabs.

  I think that you will make it, but I'd like some feedback from you.

  Welcome them

• How can I configure the double-click on a Magic Mouse 2 without the universal access icon?

  How can I configure the double-click on a Magic Mouse 2 without the universal access icon?

  --> Mouse system preferences.

• How can I configure the folder in which a movie TS file stores the report?

  How can I configure the folder in which a movie TS file stores the report?

  Thank you

  Too bad... I found it

  Thank you

• How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Active Sync iPad ssl Client certificate

  How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Hi Ewoki,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Exchange forum. Please post your question in the Forums TechNet in Exchange Server.

• Security log: How can I configure the journal required in a password?

  I have guests at home I don't want to have access to my computer. How can I configure the journal required in a password?

  Hello

  This should help:

  How to Make Windows 7 require a username and password with a Log on
  http://www.SevenForums.com/tutorials/61650-log-user-name-password.html

  If you later want to have auto login:

  How to automatically log on a user account to Windows 7 startup
  http://www.SevenForums.com/tutorials/377-log-automatically-startup.html

  How to automatically log on a user account in Windows 7
  http://pcsupport.about.com/od/Windows7/HT/auto-logon-Windows-7.htm

  I hope this helps.

• How can I configure the WAG120N as a router only?

  How can I configure the WAG120N as a router only because I don't want to use it as a modem and router?

  I want to connect the WAG120N via a cable to a modem that will make the internet connection and only use the WAG120N like a wireless router.

  Thank you for your help.

  How to configure the WAN connection? Which requires your ISP?

  Shows the status page?

  You have a working internet connection with a public IP address if you connect your computer directly to the modem? It works with two different computers?

  If you have cable internet try to use the MAC address cloning feature and clone the MAC address of the computer that has an internet connection when it is connected directly to the modem.

• I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  http://pcsupport.about.com/od/windowsvista/HT/nvistapassword.htm

  Info on the link above will help you.

  http://au.Dummies.com/how-to/content/set-up-passwords-in-Windows-Vista.html

  More info on including a password reset disc info.

  See you soon. Mick Murphy - Microsoft partner

• Can anyone tell how I can configure the desktop as the default screen that appears when I connect to Win 8?

  Original title: Desktop

  Can anyone tell how I can configure the desktop as the default screen that appears when I connect to Win 8 rather than having to go from the first layer redundant 'start-up '.

  In fact, if anyone can tell if there's a free windback to an earlier version of Windows (7) who has not all layers unnecessary and icons, I would be really grateful

  Your best bet is to switch to 8.1, that allows you to boot directly to the desktop, and then use a menu like debut8 to replace the old Start Menu and hide the side of the metro.

  If your computer comes with Win Pro 8, you may be able to demotion, otherwise, you will need to buy 7. Before you buy 7, I would recommend go to the computer manufacturer's website and see if there are any Windows 7 drivers for your computer. You may lose certain functions - sound, network, video full resolution - if there is no driver.

  The first option is easy and allows you to keep the improvements in performance and safety 8.

• How can I configure the "hand-selection-Tool" (hand-tool) as a default setting in Acrobat Reader ms?

  How can I configure the "hand-selection-Tool" (hand-tool) as a default setting in Acrobat Reader ms? I'm tired of change each time I open a pdf file...

  Hi M S.

  Could you please let us know the version of the OS on your system?

  Also please refer to this article:hand lack of tool (Installation & updates)

  Let us know if this helps,

  Concerning

  Sarojini

• How can I configure the element with the script names?

  Could Hello someone give me a hand?

  I created symbols on the stage of this script below.

  ------------------------------------------------------

  for (k = 0; k < 5; k ++) {}

  sym.createChildSymbol ("mySymB", "Stage");

  }

  ------------------------------------------------------

  How can I configure the element with the script names?

  Because, when I try to control a symbol by using the getSymbol("---") command.

  I need to know the name of the item given to each symbol.

  Concerning

  Yes, you're right.

  Using 'Code-Example' If you write sym.getSymbol ("mySymB") that edge returns the undefined value.

  With "Drag-and-drop-Example", you can use sym.getChildSymbols ().

• How can I configure a port Ethernet NI9792 gateway to communicate with a cRIO CAP?

  Salvation OR engineers,

  I intend to use my gateway NI9792 in the following way:

  1. a single Ethernet port for network connection. That's how I'm developing, download the software and monitor my request through my PC in my office.

  2. the other port to communicate with a cRIO device? If so, how can I do it?

  It seems to be a stupid question, but I really couldn't work this!

  Thanks in advance,

  Luiz

  Good afternoon, Luiz

  Follow the first link to guide the module which can be used and other links to the best part of bore configuration CRIO. For any question, please contact us.

  How to set my time on the NI WSN-9791 or NI 9792 gateway server?

  http://digital.NI.com/public.nsf/allkb/44FA322FAFF8D58D862575BD00591A54?OpenDocument

  Configuration and NI WSN product guide
  http://zone.NI.com/DevZone/CDA/tut/p/ID/8710

  Configure the Ports of double Ethernet on real-time controllers

  http://digital.NI.com/public.nsf/allkb/67F94BB93BCE32CF86257367006B3659?OpenDocument

  video installation and installation CRIO

  http://www.NI.com/SWF/demos/us/cRIO/outofbox/

  Automatic configuration of network for the cRIO-9073 and cRIO-9074 CompactRIO controllers

  http://digital.NI.com/public.nsf/allkb/37C790309A210A748625757000570938?OpenDocument

  Sincerely,

  Mauro Vera.

• How can I configure the cell data format

  How can I configure data format of cell numbers: for example, I want to capture 123456.78 and need to be 12A3456.78?

  I tried to put #A # #. # format option, but it didn't work a few time and it became A123456.78.

  I also tried on excel and it worked very well, but I like the numbers better. is there a solution to this problem?

  Thank you

  HEY Chi - Lun,

  I don't think that this is possible as many number format. You should be able to insert A in a text string using a formula, but this would happen in a second cell, not that the number has been entered.

  "Assuming all the"numbers require the same inserted letter after the second number, this should do the work."number" entered in column A; the formula in column B. In the table below, your value as an example is A6.

  = Left (A, 2) & "A" & RIGHT (A, LEN (A) - 2)

  

  Kind regards

  Barry

• How can I configure the ARD to work through the internet?

  Greetings and thanks in advance for any help provided.

  I hope that I didn't not lose only $ 80 million.

  I bought some ARD so that I can remotely access and help my father with questions as he uses his iMac. -(il est désormais impossible de l'aider par téléphone-j'ai besoin de voir son écran pour question même les plus mineure).

  I'm in NorCal, he's in SoCal - I thought that ARD has been produced for me (perhaps I should have read that it was mainly to administer computers on the SAME network).

  In research online, tube you, etc., it doesn't seem I can configure ARD to work on internet and access my dad computer - BUT there is certainly not any clear instruction I can find on how to do.

  I need a tutorial in laymans terms here. I already activate remote in the settings management - and I've installed on my mac ARD.

  And that's where I'm stuck.

  Any help or a pointer to a decent tutorial would be really appreciated!

  Thank you!

  There are a few good pages to begin with; also a search engine that is not

  take you to weird sites or wrong information could also be useful to learn. A good book

  the lack of series for offline reading manuals can also be a practical guide.

  In addition, the Viewer could help in the bar of menus main Apple find more information.

  Note: we product user Client and Admin and levels involved in ARD.

  • Desktop remotely - Apple support:

  https://www.Apple.com/support/RemoteDesktop/

  You might actually have to visit the remote computer to make sure that the settings are correct.

  Especially if the other user has no clue and the computer require direct.

  A pdf of an article that may or may not be a help.

  Apple Remote Office 3

  See the second engine search below link.

  • Apple Remote Desktop: configuration remotely via the command line (kickstart) - Apple Support

  My choice in the search engine is the one that supposedly does not follow research;

  However, clicking on links that results from each could provide a person with information.

  https://DuckDuckGo.com/?q=Using + Apple + Remote + Desktop & t = ffsb

  https://DuckDuckGo.com/?q=Using Apple + Remote + Office + installation + more + internet& t = ffsb

  Good luck & happy computing!