How do I enter the bios settings?

Similar Questions

• PC HP ENVY 700 series: How do I enter the BIOS settings

  How can I access the BIOS on this computer settings?

  Hello

  Start typing the ESC key after turning on the PC.

  Another option is to enter: change of advanced boot options on the start screen.

  You can also check out this other method.

• Satellite P50T-A01C - how to enter the BIOS settings?

  Can someone tell me please how to enter the bios on the Satellite P50T-A01C
  I tried fn f2, f10, delete, not go...

  Does anyone know how to get?

  Thanks in advance.

  If you use Win8, you must proceed to a full stop, and then after the new departure enter the BIOS settings.
  Please check - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  Try to please and post comments.

• Satellite C55 - A - 19(d) - how to enter the BIOS settings?

  Hello

  I recently bought a * laptop Satellite A-C55-19 D * with no operating system preinstalled, so I installed Windows 8.1.
  My problem is that * I can't get to the BIOS menu *.
  I turn on the computer, but I can't see any invitation to "press F2 to enter setup". I get only a screen that has just the + Toshiba Leading Innovation > + notice, then the Windows 8 points of spinning...
  I could type or hold F2, F12, ESC, DEL, but nothing is coming. I also tried to press the Fn + F2 key combination.
  What I have to enter the BIOS setup?

  Thanks in advance!

  Proceed to a complete stop as described here - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  After that restart your laptop, and then press F12. There you should be able to enter the BIOS settings.

  Check it out.

• How do I enter the BIOS in Satellite C50-A006

  Hello!

  I wanted to get into the BIOS to select the boot sequence in Satellite C50-A006 running with Win8, but I was unsuccessful. I tried pressing F2, F8, F12, ESC and DEL but no luck. Also tried Googling, also no luck.
  Help, please.

  Thank you!

  Hello

  As a first step you must perform complete closure. After doing this, you can start the machine and enter the BIOS settings.
  How to proceed to a complete stop, you can read on - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm

  Try it please.

• Satellite L310 - I can not enter the Bios settings

  Dear team,

  I have a toshiba that is always on warraty.
  Is there anyway you can help me.

  It ceased to operate effectively. It does not exceed the Bios.
  By that I mean you reach the Bios screen, but you can not enter the Bios settings.

  Details
  model: toshiba Satellite L310

  What exactly do you say: you reach the Bios screen, but you can not enter the Bios settings?
  The BIOS is secured by password or what?
  You see a splash screen of Toshiba for short time?
  Is it possible to start the Windows operating system or to recover the laptop?

  Please publish more details!

• Dynabook: How to enter the BIOS settings?

  I have a CRC Dynabook V2/470. How can I get into the BIOS
  settings on this laptop?

  Hello

  This device is not known to me, but I guess that you can enter the BIOS setting by pressing the F2 key or ESC in combination with F1.

  Good bye

• How to enter the BIOS settings?

  I try to format my machine... but when I got to get into the Bios if I change to boot from the cd.
  I don't have the option to touch anything like F10 or del

  I think the laptop is set to fast boot or something. It's the jump passed the test of memory.
  How can I get the Bios or activate the test of memory, so I have the option.

  Any help would be awsome (Y)

  Bowers85

  How is - someone must provide information or help you without any information on your laptop!
  What camera do you use?

  By the way: If you want to start on the CD you can press the C key immediately after starting the laptop or press F12 and you will get the boot menu

• C50-A-180 satellite how do I enter the BIOS Setup?

  Hi guys,.

  I have no idea how I can get into the Setup of BIOS of Satellite C50-A-180.
  I've tried some of the F1, F2, ESC, but I can't make it work. Maybe I do something wrong, too.

  I want to delet Win 8 and install Win 7, I need the bootorder for this purpose.

  I hope any of you have a clear description how enter the BIOS of this model.

  Hello

  Before you anything please create recovery media (DVD or USB drive). After the new operating system installed, you will not be able to install the original image of the HARD drive recovery. Don t forget it is very important.

  So, after you do this proceed to a complete stop - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  Recommencer start laptop, then press F12 to get into the boot menu. There you can choose the first boot device.

  One last thing. Before you begin with Win7 installation check if your laptop is supported and Toshiba offers all the drivers, tools and utilities.

• Satellite 2540xcdt: How do I enter the BIOS

  Hello

  I just bought a computer above and would like to know how to enter the bios before it starts to the BONE.

  anyone out there have any ideas?

  Thank you very much

  F

  Hello

  Have you tried to use ESC and F1?

• How can I enter the BIOS of a Portege M100?

  I have in fact two problems: How can I get into the Bios and why I can't install the latest drivers for the graphics chip?

  I want to increase the performance of grafic maximally, as I increased the RAM and the laptop is fast enough.
  I would like to play more games requiring directx9c.

  Anything you can help me: tx in advance.

  Hello

  Do you use the Toshiba BIOS or Phoenix BIOS?
  I'm not 100% sure but I think it's a Toshiba BIOS... in this case, you can use the ESC key to access the BIOS settings.

  > I want to increase the graphics performance to the maximum.
  I have bad news for you... the only true way to increase graphics performance is the upgrade to the graphics chip... BUT this is not possible. The GPU chip is fixed on the Board and it is not possible to remove it.

  > I would like to play more games requiring directx9c
  Well, most of the games require the directx9c. You can use the command "dxdiag" to access the DirectX settings and verify the installed version.

  By the way; You can download the directx9c from the Microsoft Web site

• How do I enter the BIOS in e450

  Just got this laptop.

  Cannot get into the BIOS. NO F1 - F12 keys.

  At the start, he just gives the Lenovo then boots windows start screen 8. I'm clicking on F1 (also tried FN + F1) and nothing happens.

  How to get into bios...

  Thank you

  Hi jimmyr, welcome to the forum.

  Please see this link, and he must answer the question for you.

  http://blog.Lenovo.com/en/blog/how-to-enter-the-BIOS-Setup-utility-or-boot-menu-with-Windows-8-1/

  See you soon

  DragonRider

• Can not enter the BIOS settings

  Hello. I can't enter the Bios on z580 with 8.1 windows settings. I tried everything, including now shift with bios stop and accsesing under windows, nothing seems to work and windows strarts just straight up normally. Also, I can't update to solve this problem. I hope someone can help.

  Thanks for confirming.

  In your post original, you said 'change of outfit with the judgment', so I wanted to be sure that you try SHIFT-restart.

  Have you tried to stop completely and pressing the button "novo" (a recovery key). On my Win8.1 Yoga 2 Pro, that brings up a menu containing several elements, which is the BIOS Setup.

  Kind regards.

• Can not start my old Satelite A100-168 or enter the BIOS settings

  Hi all

  My problem and simple to explain:
  When I turn on my laptop, it's as if it was on, but nothing happens.
  The HARD drive led is not active.
  It is also impossible to go into the BIOS settings. The ESC key does not work.
  Everything is black.
  I tried to put a boot disk, but nothing happens.

  So is - anyone help me?

  Thanks in advance

  Message was edited: assignment has been translated

  From my point of view of the defective material, any party may cause the described problem.
  Even only one defective memory card could prevent the laptop to boot the system.
  Of course, also the dysfunction of the BIOS EPROM module would prevent execution of the power on self test and ultimately, it would mean that laptop may not illuminate correctly.

  I think that there is no general solution... parts must be checked; one by one.
  In the worst case, there is a motherboard problem and I think that in this case it s not worth to fix the unit because of the high cost of motherboard.

• Satellite A40-151: how to enter the BIOS settings?

  Hello...

  I'm on Toshiba Satellite A40-151 the DVD for this broken but this isn't worth it.
  The problem is that I can't enter the setup (BIOS) to boot from a different boot device, or I do not now how to enter.

  Help, please

  thanx

  Hello

  I think you have a Toshiba BIOS.
  In this case you must press the ESC key immediately after the laptop has been powered. Try to press the button several times

  By the way; You can also use the F12 key to get the boot menu.
  Then you could easily choose your boot device
  This also works

  Good bye