Satellite L310 - I can not enter the Bios settings

Similar Questions

• Can not enter the BIOS settings

  Hello. I can't enter the Bios on z580 with 8.1 windows settings. I tried everything, including now shift with bios stop and accsesing under windows, nothing seems to work and windows strarts just straight up normally. Also, I can't update to solve this problem. I hope someone can help.

  Thanks for confirming.

  In your post original, you said 'change of outfit with the judgment', so I wanted to be sure that you try SHIFT-restart.

  Have you tried to stop completely and pressing the button "novo" (a recovery key). On my Win8.1 Yoga 2 Pro, that brings up a menu containing several elements, which is the BIOS Setup.

  Kind regards.

• Satellite P50T-A01C - how to enter the BIOS settings?

  Can someone tell me please how to enter the bios on the Satellite P50T-A01C
  I tried fn f2, f10, delete, not go...

  Does anyone know how to get?

  Thanks in advance.

  If you use Win8, you must proceed to a full stop, and then after the new departure enter the BIOS settings.
  Please check - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  Try to please and post comments.

• Satellite C660 - 2-3: can not enter the BIOS

  Hello

  I activated the quick start function that ignores the Logos and boots only from the HARD drive, but now I need to install a 32-bit Windows for the school, but I can not enter or reset the Bios.

  I tried every combination of buttons, I can think.
  Is there a way to delete this feature again without disassembling?
  Existing windows are not the original, so no toshiba software is installed.

  Thanks for help.

  Hello

  Have you tried pressing the F2 key while turning on the laptop?
  Press F2 repeatedly in line if this will not help press first "INS" and then F2 to enter the BIOS

  Good luck

• Satellite A40-151: how to enter the BIOS settings?

  Hello...

  I'm on Toshiba Satellite A40-151 the DVD for this broken but this isn't worth it.
  The problem is that I can't enter the setup (BIOS) to boot from a different boot device, or I do not now how to enter.

  Help, please

  thanx

  Hello

  I think you have a Toshiba BIOS.
  In this case you must press the ESC key immediately after the laptop has been powered. Try to press the button several times

  By the way; You can also use the F12 key to get the boot menu.
  Then you could easily choose your boot device
  This also works

  Good bye

• Satellite Pro A300-1LG - cannot enter the BIOS settings

  For some time when I turn the notebook on the page where it appears the Toshiba logo are not displayed and I can't get into the BIOS.

  And put back two or three times and then reappear details.

  I tried to reinstall the BIOS, but the BIOS installation tells me that the version I installed is the existing one.

  Do you have any suggestions?

  + The message was edited: assignment has been translated.

  *@manona*
  Please post in English. This is a user to user community where the English language is required!

  (* 1) * my knowledge the CMOS battery is soldered to the motherboard and cannot be replaced like for example on desktop PC
  (* 2) * remove the CMOS battery would NOT reset the BIOS nor would be to remove the passwords.

  If I understand your problem, you are not able to access the BIOS, but you can start the laptop and the system. Is this correct?

  You have a kind of password (user / supervisor password?)

• (Redirected) Alienware x 51 will not be closed. Fans and lights still on. Can not enter the BIOS at startup.

  Hello

  My Alienware x 51 will not be closed properly. Fan and lights constantly. I need to hold the powerbutton to shut it down.

  Its an Alienware X-51-purchased around June 2012.
  GeForce GTX 555
  Intel Core i7-3770 CPU @ 3, 40GHz
  8.00 GB OF RAM
  Windows 7 Home Premium

  The problem started when I upgraded my BIOS version A06 to A13 (running A14 now). Now, whenever I turned off my computer, the lights are still up and the fan runs. In order to stop completely, I have to press the "switch" button.

  My warranty expired a year ago.

  Anyone know how to fix this? I suspect there is something wrong with my motherboard, since I can't even get into the BIOS setup when I start my computer.

  Has anyone tried to replace the motherboard? What type of motherboard do need me? Is it possible to buy the "original" Alienware mobo?

  I hope someone is able to help. Comments or suggestions are welcome.

  Anders

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Y50-70: can not enter the BIOS over and cannot find a second hdmi monitor that I have already

  First problem is that I tried after a while to get into the BIOS (have the latest version of the BIOS lenovo offers) and could not get with any of the known keys. Delete and F2 go to the windows start menu, F8 goes in the hard disk boot menu and F12 in menu advanced windows (safe mode, repair etc.). I could have mixed with key who does what, but ultimately none of them goes into the BIOS.

  Second problem, to my father's office it is a hdmi LCD TV that I previously used as a second monitor from the laptop. But I haven't used for awhile and now it no longer recognizes. I have the latest drivers Intel and Nvidia. When I press on detect in the menu of the screen resolution I have two small gray monitors (screens not detected, one for each graphics chip).

  Any ideas?

  Thank you

  I finally found a way in the BIOS.

  Log on to Windows

  Bring up the Menu

  Select "Power".

  Hold down the SHIFT key and select "stop".

  Now press the Novo button (next to power button)

  This will bring you a Menu that has "BIOS Setup" in there.

  Would be easier if the F2 key could be implemented again well.

• Can not enter the parameters of the BIOS on my Qosmio F30-112

  Dear lovers of Qosmio,

  Since I have updated Bios version 3.60 - winning, I'm not able to access my BIOS. I turn on my laptop while pressing ESC I get SYSTEM CHECK. Press [F1] to enter the bios. I press F1 , nothing happens, I pressed it several times the same thing. It's not like my Qsomio f30 - 112 made problems or anything else I want to be able to access my bios, who knows.

  Can you please help. by the way I tried 100 times > _

  Dear Hamid is very strange and at the same time stupid situation. I don't really know what the problem is here. Computers laptop Toshiba usually have 2 different BIOS versions. One is defined as Toshiba BIOS and secondly is Phoenix BIOS. Your Qosmio definitely has this version of the Toshiba BIOS and you can enter the BIOS settings using the keys F1 ESC.

  If possible try to call the service authorized in your country. If you can not enter the BIOS settings you need of some explanation expertise. If you will get some info useful please share it with us.

• Can not enter the parameters of the BIOS on Qosmio F60 - 147

  * Hello *.
  * Please could you help.*

  Toshiba Qosmio F60-147 have a brand of laptop. Yesterday, I wanted to put a password on the BIOS and the field "Set supervisor password" save the password I wrote and I recorded went with the F10.
  But then I want to enter is F2 during startup to restart when I press. I can't enter a kind of is. But I still can't connect is Bios Update. We don't have a problem with the windows open on my computer that I use without problem. Is why not glue only one question. ?

  * I turned on the computer, I press F2 until the Qosmio logo, but I can't enter the bios and resumes.*

  When you start your laptop can see you in the lower corner of the message display press F2 to enter the BIOS...?
  What happen exactly when you press the power button / stop?

• Satellite C55 - A - 19(d) - how to enter the BIOS settings?

  Hello

  I recently bought a * laptop Satellite A-C55-19 D * with no operating system preinstalled, so I installed Windows 8.1.
  My problem is that * I can't get to the BIOS menu *.
  I turn on the computer, but I can't see any invitation to "press F2 to enter setup". I get only a screen that has just the + Toshiba Leading Innovation > + notice, then the Windows 8 points of spinning...
  I could type or hold F2, F12, ESC, DEL, but nothing is coming. I also tried to press the Fn + F2 key combination.
  What I have to enter the BIOS setup?

  Thanks in advance!

  Proceed to a complete stop as described here - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  After that restart your laptop, and then press F12. There you should be able to enter the BIOS settings.

  Check it out.

• Satellite L500-1ZP - key to enter the BIOS version 2.10 and the upgrade of RAM

  Hello

  I have two questions:

  1. I recently updated my bios version of laptops to 2.10 and replaced the hard drive with an SSD.
  However, it seems that I can't enter the BIOS more.

  I tried several buttons, but it just won't let me get bios of the laptop more.
  Which button to use to access the BIOS?

  2. I want to upgrade the standard amount of memory from 4 GB to 8 GB.
  Are there recommended RAM sets should I use because of compatibility issues?

  Thanks in advance for any help.

  Kind regards.

  > 1. I recently updated my bios version of laptops to 2.10 and replaced the hard drive with an SSD.
  > However, it seems that I can't enter the BIOS more.

  To access the BIOS press F2 at the beginning of the order started immediately after you have switched on the device, press F2 (press several times on the line)

  > 2. I want to upgrade the standard amount of memory from 4 GB to 8 GB.
  > Are there any sets recommended RAM should I use because of compatibility issues?

  Toshiba Satellite L500-1ZP laptop takes the type of RAM SODIMM SDRAM PC3-8500 DDR3-1066 MHz 204pin. I would recommend the manufacturer Kingston modules.
  Value report great price

• I used "msconfig, in an attempt to speed up my laptop. I did something wrong and I can not enter the first 13 items, only the trial version. I'm on vacation and he would like you could give me a temporary serial number fo three weeks please. Phil M

  I used "msconfig, in an attempt to speed up my laptop. I did something wrong and I can not enter the first 13 items, only the trial version. I'm on vacation and he would like you could give me a temporary serial number three weeks please. Phil McMillan

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Can not enter the alphabetical letters in redemption code... only numbers. Œuvres for thin keyboard everywhere else on my iMac.

  Can not enter the alphabetical letters in redemption code... only numbers. Œuvres for keyboard very well everywhere else on my iMac.Any suggestions?

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

• can not find the sleep settings screen on ubuntu 11.10

  can not find the sleep settings screen in ubuntu 11.10

  http://UbuntuForums.org/