How do I have a packard bell istart 2380 factory reset?

Similar Questions

• can someone help me? I have a packard bell pc with windows xp pre-installed - how to restore the pc back to factory settings that there is very little memory available

  can someone help me? I need to restore a packard bell pc with windows xp pre-installed at the factory settings.

  thanx

  Theresa

  Hello

  · Why you restore to factory setting?

  · What is the model number of the computer?

  I suggest you to contact the manufacturer of the computer for better assistance to restore the computer to factory setting.

• I have a Packard Bell computer laptop, installed speedypc and scanned but pc still keeps freezing

  Oh my? is my title lol

  * original title - Hi got packard bell laptop computer, installed speedypc and scanned but pc still keeps freezing - silly instrucs pse - thx * need help of pse - no new download installed and has had this prob for a few days.

  Hello nettynooross,

  Here attached a link where other users have had this problem.  There are several steps to try.  I hope this helps out.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/my-computer-freezes-randomly-and-is-doing-it-more/21b36130-50c8-41d2-B82C-5655f32a7831

  Thank you

• Hi I have a packard bell 32-bit Vista sp2, once I connect my screen turns off.

  Hi, I'm having problems after I connect to my screen goes blank only thing on the screen is the mouse party color is black, I tried f8 and booting in safe mode, and windows came a few seconds, I also have a problem with windows defender, in lower right hand corner Defender icon with yellow circle inside After I click on it, there is a dialog box pops up saying Defender is turned of, after I activate activate the defender of the dialog box returns with the same msg, when I select the close dialog box stays there after about 5 min the Defender is turned on, I use avg 9.0 as protection against malware.

  Hi Iain-p,

  In addition to Helpster, you can also try these:

  Has) check if you get an error after you enable VGA mode.
  i. restart the computer
  II. keep tapping the F8 key during the restart of the computer
  III. Select Enable VGA mode by using the arrow keys and press enter
  This will allow as the default display adapter.  Let us know the error code, if you get one.

  B) remove all floppy disks, CDs, DVDS and material external to your computer, and then restart in normal mode and check if the problem of duplicates.

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HOW TO INSTALL A WIRELESS PRINTER MODEL HP OFFICEJET 6700 PREMIUM ON PACKARD BELL LAPTOP

  I have NEED to INSTALL MY HP OFFICEJET PRINTER 6700 PREMIUM without THREAD AS I ONLY HAVE A HEWLETT PACKARD computer LAPTOP so CAN NOT PUT IN THE DISK PROVIDED.

  I assume you mean that you have a Packard Bell netbook which doesn't have a CD player.

  You can download the necessary software on the Internet and install it without the CD.  The location of base for your printer is here--> http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&os=228&product=5058338&sw_lang=&

  Most netbooks come with Windows 7 Starter, so for a better response, please indicate the model of your computer and the version of Windows you have installed (right click on desktop and select properties for this information).

  You have a wireless router? If so, what is its brand & model?
  The printer came with a USB cable (even if in the end, you want to print wireless)?

• Packard Bell Easynote laptop computer CD Rom problem in Vista

  I have a Packard Bell Easynote laptop computer and the CD rom does not recognize my DVD - RW drive, it recognizes and plays all other formats, any ideas how to solve this problem?

  Russ

  Hello

  Close all programs and then put in a DVD - RW blank = what happens?

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD/DVDs have a tolerance + - and may your reading/reading on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot restore my net book of packard bell back factory settings

  Please can someone help me I have restored my net book of packard bell back to factory settings that it kept freezing now the screen is stuck and just said the Installer starts services but nothing is past help

  Discussions were merged.

  Double not deleted to "inflate" list

  If this does not work, I suggest you contact Packard Bell for assistance this is a Netbook with no DVD player.

  Download the ISO file.

  http://www.w7forums.com/threads/official-Windows-7-SP1-ISO-image-downloads.12325/page-2#post-124821

  Use the product key on the machine:

  

  Using the method of USB in conjunction with the Windows 7 download preceding:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  "How to get and use the Windows 7 USB/DVD Download Tool"

  http://www.SevenForums.com/tutorials/31541-Windows-7-USB-DVD-download-tool.html

  By using the downloaded ISO file method can require the Activation of phone.

  If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.

  See you soon.

• Need drivers for graphics card for a Packard Bell iMedia 5070

  Hello!

  I have a "Packard Bell iMedia 5070 desktop PC", unfortunately I have more preinstalled graphics card drivers. Is there someone who could direct me to a place where I can download them? They are not on the main site of Packard Bell.

  Thanks in advance!

  Hello

  Here are the links to the graphics card that can be installed on your computer. Access links and run the driver search tool, which is the driver to be installed on the computer automatically.

  Intel: http://downloadcenter.intel.com/

  NVIDIA Driver Downloads: http://www.nvidia.com/Download/index.aspx?lang=en-us

  AMD Support & drivers: http://support.amd.com/us/Pages/AMDSupportHub.aspx

• problems with packard bell key board

  I have a Packard Bell laptop, windows7 home premium loaded down, I have problems with my key board? some othes to work are not, please explain in simple language. I'm not a rocket scientist.

  Phillip (France)

  Hello

  When you install another operating system, either through reinstalling which was initially installed or to install another operating system, you must ensure that latest Packard Bell for your model laptop hardware drivers are installed and / or are available.

  You don't say what was initially installed in the computer or if you checked to see if Packard Bell supported install Windows 7 on your laptop model.

  Here are the links to see if Windows 7 drivers are available for your laptop:

  Packard Bell support

  http://www.PackardBell.com/support/

  Download Packard Bell Center:

  http://IL.PackardBell.com/PB/en/IL/content/download

  If Windows 7 drivers are available, download and install them.

  If there are no Windows 7 drivers from Packard Bell, I suggest to go back to what was originally installed.

  See you soon.

• keyboard and mouse on packard bell laptop only work in safe mode

  I have a packard bell easynote laptop running on windows vista, which has fine worked for two years, the other day I went to signon and not all the hits of keyboard have been recognized, after possibly connection and found loading keyboard and a mouse does not respond as completely unusable.

  -Booted safe mode and everything works fine, ran the antivirus and diagnosis-nothing found, still only works in safe mode.

  has run a restore of system-nada, still only works in safe mode

  tried an own help start-up-no, still only works in safe mode

  Please help he kills me!

  Well, I decided to bite the bullet and give it a go, after all, I know very little of these things, however I'd wait until Saturday, when I have the time to focus on it, then the word 'Register' in your response reminded me that I had bought registry cleaner Uniblue several months ago that I ran last night and hey presto problem solved! :), I'll never know if your solution would work but thanks for your help anyway and I hope that you would have had me there.

  Rich

• I have a computer laptop packard bell who became very slow when stopping down

  I HAVE A LAPTOP FROM PACKARD BELL, WHICH BECAME VERY SLOW CLOSE. I SUSPECT THAT THERE IS A BACKGROUND PROGRAM SHUTDOWN TACTIC, BECAUSE SOMETIMES A BLUE SCREEN APPEARS LITERALLY HALF A SECOND, THEN DISAPPEARING TOO FAST FOR ME TO READ. HOWEVER, IVE JUST MANAGED TO SEE 'FORCE SHUT DOWN' WILL DISPLAY. CAN ANYONE HELP?

  PS - IM RUNNING KASPERSKY PURE 2012 AND I LOADED DISKKEEPER (TRIAL VERSION).

  EXCEPT THAT IVE BEEN THRU ALL MY STARTUP PROGRAMS AND SEVERELY LIMITED THEM.

  Most of the time, you can use the Task Manager to see which programs are hogging resources.  Make sure you click on tab the process, and then on the small button at the bottom left that says something like "show processes from all users".

  In addition, switch to view... Select the columns entry and select other readings/o and i/o
  You can sort the columns by clicking on the title - this way, you can control what is spking during closing.  Get the name of the process that is spking and we can start watching them.

  Also, try the clean boot here procedure to solve problems: http://support.microsoft.com/kb/929135
  Another link for him here: http://support.microsoft.com/kb/331796

• Packard Bell m/c will now fire up to the "home page" - MS system is Windows XP

  Windows xp now will not pull upward on the old Packard Bell computer, then the screen falls in "sleep" mode I have the original Windows XP disks, but does not help. Can I make a record of 'boot' via the net using my second computer?

  Here are the instructions to burn a cd for the disk to boot Hiren that you can then run checkdisk, a memory test and other tools

  Courtesy of Jose Ibarra

  Do you have a Hiren Boot CD, which you can download here:
  
  http://www.hirensbootcd.org/download/

  The ZIP file is large, so the download will take probably a little while to complete the bit it is worth.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  In the file Hiren ZIP are the file BurnToCD.cmd that you can double-click to start, but I've never used and prefer to use ImgBurn.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install anything from UniBlue or the Ask Toolbar (never install the ASK toolbar for nothing).

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.

  Let chkdsk finish to correct the problems, he could find.

  According to the speed of your system, the size of the volume, the amount of data on the volume and what chkdsk finds to do, he may take a long time for chkdsk with error correction to complete (several hours) or it may seem to be 'stuck '.  Be patient.  If the HARD drive led blinks always, chkdsk is something to not interrupt him.  It finally end one way or the other.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You may need to run Chkdsk c:/r more than once.

• Loss of volume in the packard bell note

  Original title: ive a packard bell note and somehow lost my volumn absolutely nothing in accessories or property?

  My question as above hope someone out there can help and advise me, it has been installed do not know what I did?

  Hello

  I understand that you have lost volume on Packard Bell note. I understand the inconvenience.

  Did you of recent changes to the computer before the show?

  I suggest to refer to the following article and follow the steps suggested by Stephanie S.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-desktop/i-lost-my-volume-and-my-volume-icon-how-can-i/49d25886-e45a-4fb8-A883-1e30e9223934

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Concerning

• FIX: "no mountable boot Volume' on Packard - Bell EasyNote A8

  Hello:

  I want that my recent experience would be helpful to my fellow users.

  My Packard - Bell EasyNote A8, running Windows XP Home, was to have a "Blue screen of death" problem very frustrating showing "One-Mountable boot Volume," at the start of the system, just after loading Windows XP logo, after a recent system total restore factory & all subsequent updates have been made. An extensive internet search was not much help. Physical damage to several sectors on the hard disk are likely, after all, there @ and 10,000 POH

  Solution:

  1. let regenerator HD program work for about 6 weeks continuously. I don't know how this has helped, it detected 100 many bad/damaged areas and repaired only 3. Had to manually stop because he was taking forever. He got stuck on 47118Mb, with @ 3Gb more to go.

  2 restart the computer. Press the magic F11 button.

  3. system restore started. It is automatically detected and repaired the damaged partition. Everything is automatic. Just sit back & relax & follow the prompts on the screen.

  4. my Packard - Bell EasyNote A8 now return works perfectly as it was before the problem started. All updates completed. No "blue screen of death" until now.

  E-mail address is removed from the privacy *.

  Hi M_Rafi,

  Follow the steps in this document to resolve your problem with unmountable boot volume.

• Can Win XP Pro on the Packard Bell System evolve?

  HY. I USE a PACKARD BELL INTEL (R) PENTIUM (R) DUAL CPU * address email is removed from private life * 2.00 GB of ram AND I want TO DO AN UPGRADE. CAN I DO IT? IF SO, HOW? I HAVE WIN XP PRO. SP 3... !

  You plan to upgrade to Vista or Windows 7.

  If the answer is Vista, and then you perform an upgrade on the spot, that will keep all your applications and data intack. Note the bare minimum of RAM/memory you need for Vista is 2 GB and it runs slower than XP.

  If the answer is Windows 7, then your only choice is a "custom" / Clean install which means that you must back up all your data file (on external support) and then once the upgrade is complete and then install applications. ". Memory required for Windows 7 are 1 GB for 32-Bit OS or 2 GB for the 64-bit operating system.

  You must run the compatabily Windows 7 checker before doing anything: Windows 7 Compatibility Checker
  http://www.Microsoft.com/Windows/compatibility/en-us/default.aspx

  Windows 7 Upgrade Advisor
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows XP to Windows 7 Migration Guide
  http://TechNet.Microsoft.com/en-us/Windows/ee150430.aspx

  Here are answers to some common questions about the 32-bit versions and 64-bit Windows.
  http://www.Microsoft.com/Windows/Windows-7/compare/32-bit-64-bit-FAQ.aspx

  Also: Check Windows 7 device drivers available for your make and model. If there is no drivers then chances are one or more device (LAN, sound, Etc.) may not work.

  As always, make a backup of the Image of your external hard drive USB driver before you start the actual upgrade.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.