FIX: "no mountable boot Volume' on Packard - Bell EasyNote A8

Similar Questions

• Packard Bell Easynote laptop computer CD Rom problem in Vista

  I have a Packard Bell Easynote laptop computer and the CD rom does not recognize my DVD - RW drive, it recognizes and plays all other formats, any ideas how to solve this problem?

  Russ

  Hello

  Close all programs and then put in a DVD - RW blank = what happens?

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD/DVDs have a tolerance + - and may your reading/reading on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Packard Bell EasyNote ENTG71BM Ram Upgrade

  Hello.

  I got a new packard bell easyNote laptop computer ENTG71BM. This one has 2 GB of ram and windows 8.1 so ram is not enough. Can I remove the backcase and install another 2 GB of ram? Is an empty slot available?

  First remove your image (full S/N and SNID said).

  PB ENTG71BM (8.1 - 64 bit Windows) has the same mothers like the Acer Aspire ES1-512.

  Your laptop supports up to 8 GB - DDR3L - 1600 MHz (1x8Gb).

  1 - the bars of origin are:

• Packard Bell EasyNote SJ51 coprocessor driver is missing

  Hello world

  I've updated this laptop Packard Bell EasyNote SJ51, with native Windows Vista Basic, Windows 7 Ultimate.
  After installation clean smooth found WU driver VGA that apparently has not been incorporated in the W7U so that I had to download synaptic drivers on mine.
  So great that I decided to glorify it with a memory upgrade buying little extra RAM.
  I've used Speccy to search for details and then realized that the temperature is too high. (70/80 ° C)
  Once activated the materiel management tool, I discovered that the coprocessor driver is missing... so I ran windows research pilot of this Panel, the OS invites you to visit the Web site of the manufacturer I did but I couldn't really find anything related to this laptop.
  Even on the site Web of NVIDIA.
  No idea where should I look for him safely?
  Thanks in advance for your help.
  Information on the mobo:
  Motherboard

  Manufacturer PACKARD BELL BV

  Model EasyNote_SJ51 (Socket A)

  Version PB96F104A7

  NVIDIA Chipset provider

  Model of chipset nForce 560

  Chipset revision A2

  Southbridge NVIDIA provider

  Model of Southbridge nForce 560

  Southbridge revision A2

  System of temperature 70 ° c.

  BIOS

  Brand Phoenix Technologies Ltd.

  Version 1.0 H-3221-0010

  Day 12/03/2008

  ICP data

  PCI slot

  Type of PCI slot

  Use of the available slot

  Bus width 32-bit

  PCI Slot 1 slot designation

  Slot number 0

  PCI slot

  Type of PCI slot

  Use of the available slot

  Bus width 32-bit

  PCI Slot 2 slot designation

  Slot number 1
  Details of the CPU
  CENTRAL PROCESSING UNIT

  AMD Turion 64 Mobile TK-57

  Carrots 2

  NET 2

  Name AMD Turion 64 Mobile TK-57

  Codename Tyler

  Package of Socket S1 (638)

  65nm technology

  Specification of the AMD Athlon (TM) 64 X 2 Dual - Core TK-57 processor

  Family F

  Extended family F

  Model 8

  Model expanded to 68

  Stepping 2

  Instructions (+) MMX, 3DNow! (+), SSE, SSE2, SSE3, AMD 64

  Virtualization Supportato, disabled

  Hyperthreading unsupported

  200.3 MHz bus speed

  801,4 MHz rated Bus speed

  Stock of basic speed 1900 MHz

  Stock of 200 MHz Bus speed

  Average temperature of 74 ° C

  Caches

  L1 Data Cache Size 2 x 64 KB

  L1 Instructions Cache Size 2 x 64 KB

  L2 unified Cache Size 2 x 256 KB

  Core 0

  Basic speed 1903,0 MHz

  Multiplier x 9.5

  200.3 MHz bus speed

  801,4 MHz rated Bus speed

  Temperature of 73 ° c.

  Thread 1

  APIC ID 0

  Base 1

  Basic speed 1903,0 MHz

  Multiplier x 9.5

  200.3 MHz bus speed

  801,4 MHz rated Bus speed

  Temperature of 75 ° c.

  Thread 1

  APIC ID 1
  IlConteMascetti

  Hello

  I installed the

  15.23_nforce_winvista32_international_whql

  found on NVidia U.S. and looks that the coprocessor driver was finally installed.

  Greetings

  IlConteMascetti

• Not mountable boot volume, DVD does not work

  I got the error unmountable boot volume and when I try to boot from my install dvd nothing comes. I have a HP Pavilion Dv6000. My only startup options are the normal startup (which leads to the BSoD) and the Startup Repair, which gives me just a black screen with the cursor. What is going on?

  Hello

  1. do you get an error with this error code?

  Method 1.
  First of all I would ask you to put the first boot device to the CD - DVD drive. This change is made in the BIOS. You may need to contact the manufacturer of your BIOS to change these settings.

  Important note: changes to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  Note:
  If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.

  Method 2.
  You can try the following steps (skip these steps if you've already tried).
  Menu of boot options advanced access by pressing the F8 key when the computer is restarted > on the Advanced Boot Options screen > select repair your computer option.
  Now, select command prompt recovery tool and run the disk check to repair bad sectors on the hard disk.
  a. at the command prompt, type chkdsk /f and then press ENTER.
  b.Now, type chkdsk/r, and then press ENTER.

  Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  You can also try to restore the environment of system recovery.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Not mountable boot volume

  Hi all

  I have this problem since Friday, when my laptop crashed. Says "Unmountable_boot_volume" blue screen of death and refuses to boot windows in any form (safe mode and otherwise). I was stressed out since all my data was on it. However I managed to use a bootable linux cdrom program named knoppix for access and backup my files. When I used the recovery cd, the recovery process stops with an error.

  I checked the net, where people have solved this problem by using a windows xp cd. After following their advice and using chkdsk/r, the process stops and the chkdsk program tells me there are one or more errors that prevent him to fix it. checking further... people have used the fixboot or fixmbr to repair their starting system, this does not work. The program he says even that my hard drive is broken. Oddly enough, my hard drive is still accessible with the cd of linux?

  Then I tried to format it. with format c:... seemed to work ok... no errors and other things. However if I go to the root and the type of the dir command, the compu tells me that there is something wrong with my system files. What is even more strange: AFTER formatting of my readers, readers and their information is still intact with the LINUX cd and fully accessible? !!! Anyone know what to do... im desperate >?

  Thank you

  Benoit

  Post edited by: bwitkamp

  Hello
  Use partition magic or similar software to clean the hard disk, you have very probably a Linux partition on the hard disk that prevents return to work. therefore give you the ok. Back and flop in recovery.

  BTW, you might have used microsofts own downloadable windows XP startup disk in their download section to run again and correct the above error.
  concerning

  Gandalfwhite

• Packard bell easynote you 11hc on custom windows 7 activate WiFi even after pressing f3

  Well, it's bad for me because I do a lot on the internet and it started today. And are not sitting well you should try pressing Fn + F3 because that's what I do when I need to use it because my laptop has a weird keyboard and I reinstalled my drivers and still nothing nothing has helped even from support.

  If you haven't already done so, try to run the network troubleshooters (esp "network and Internet" - "Internet connection" and "Network card") to see if they find and fix any problems.

  Have you looked into "Device Manager" (from ) under network adapters, in order to check that the wireless adapter is listed, working correctly and enabled? Right click on the adapter, and then click Properties.

• Packard Bell Easynote TK81 compatible motherboards

  Hi, I need compatible motherboard for Easynote TK81 - PEW96. I burned by the way the videochip and now we cannot find compatible motherboard. CPU is MAD Athlon II P360. Can you tell me MB compatible for this model of videochip? Thank you.

  Here are a few:

  http://www.eBay.com/Sch/i.html?_odkw=&_osacat=1244&_FROM=R40&_trksid=p2045573.M570.L1313&_nkw=Easyno...

• 4 SIMS will work on my PACKARD BELL EasyNote TM

  Hello

  Wondering if anyone could shed some light on this for me please...

  The sticker on my lap top says:

  4 GB of DDR3 memory

  AMD Athlon II X 2 P340 processor

  ATI Mobility Radeon HD 4250 graphics card

  HARD DRIVE 320 GB

  16.9 15.6 "HD LED LCD

  DVD-Super Multi DL Drive

  Windows 7

  AMD vision

  If you need any other information please let me know :)

  Thanks in advance!

  Hayley

  It looks like, if your processor is 2 GHz

  http://www.GameSpot.com/articles/the-Sims-4-PC-system-requirements-revealed/1100-6421318/

  PROCESSOR: 1.8 GHz Intel Core 2 Duo, AMD Athlon 64 Dual - Core 4000 + or equivalent (for computers using chipsets graphics integrated, the game requires 2.0 GHz Intel Core 2 Duo 2.0 GHz AMD Turion 64 X 2 TL-62 or equivalent)

• Loss of volume in the packard bell note

  Original title: ive a packard bell note and somehow lost my volumn absolutely nothing in accessories or property?

  My question as above hope someone out there can help and advise me, it has been installed do not know what I did?

  Hello

  I understand that you have lost volume on Packard Bell note. I understand the inconvenience.

  Did you of recent changes to the computer before the show?

  I suggest to refer to the following article and follow the steps suggested by Stephanie S.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-desktop/i-lost-my-volume-and-my-volume-icon-how-can-i/49d25886-e45a-4fb8-A883-1e30e9223934

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Concerning

• C6N91UA #ABA: UNMOUTABLE BOOT VOLUME - laptop hp 2000

  My HP laptop would not boot from the USB installation media did fix the unmountable boot volume. Need to know why and what to do, to start for more options.

  The goal to boot with the USB installation media. Am a HP reseller and need help to start this l.

  Finally get the USB Installation media to start right and repair the boot Volume. Thank you all for your help. God bless you.

• keyboard and mouse on packard bell laptop only work in safe mode

  I have a packard bell easynote laptop running on windows vista, which has fine worked for two years, the other day I went to signon and not all the hits of keyboard have been recognized, after possibly connection and found loading keyboard and a mouse does not respond as completely unusable.

  -Booted safe mode and everything works fine, ran the antivirus and diagnosis-nothing found, still only works in safe mode.

  has run a restore of system-nada, still only works in safe mode

  tried an own help start-up-no, still only works in safe mode

  Please help he kills me!

  Well, I decided to bite the bullet and give it a go, after all, I know very little of these things, however I'd wait until Saturday, when I have the time to focus on it, then the word 'Register' in your response reminded me that I had bought registry cleaner Uniblue several months ago that I ran last night and hey presto problem solved! :), I'll never know if your solution would work but thanks for your help anyway and I hope that you would have had me there.

  Rich

• Problems with factory reset on a Packard Bell

  Hi cox.haley1,

  After a Microsoft update Tuesday May 13 laptop Packard Bell Easynote TK85-GN-051UK of my granddaughter had a huge problem with the start-up that could only be ordered with a Factory Reset. Finally I had all this work and re-installed all software programs. Several days later, after update of Microsoft more, another problem arose that could only be fixed again with a Factory Reset, so I had some things to begin to repair, but it got stuck in the Installation of the software... Install Office 2010...33/45

  18hrs. later he was still stuck there.

  I sent to Packard Bell for re-installing operating system Windows 7 DVD & utilities drivers & Applications DVD... Incl. postage. £37.

  They have not worked as once more stuck in the same place.

  Packard Bell is a Dutch manufacturer and a subsidiary of Acer will help so I don't need to waste money on recovery discs.

  Can anyone suggest something to help please?

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-cannot-complete-installation-in-safe-mode/5e913a56-B29B-4386-A462-20e1991a1edc#LastReply

  Thank you. All sorted now. There is a corruption of Microsoft Office files. Formatting of hard disk. Re-installed my Windows 7, etc and then all software, updates everything and now all is well again.

• boot volume not mountable on presario cq56 - 219wm laptop

  can someone help me please... I have no drives for this laptop.  I have no idea how solve this thing, it was working fine before bed and now it isn't. I managed to control a number of things by reading this forum. I got a code that says "unmountable boot volume" I did a hard reboot as it said and that did nothing. I tried repairing the system when she appeared, did nothing. I tried to do safe mode, but I can't tell if it of in there or not. After loads of windows logo I get a blue corrugated (a bit like a curtian blowing in the Breeze) of the screen and the mouse shows but nothing else, start no button, no icon of shortcut... nothing. I've had a few years but it has barely been used and when it is used its especially for printing photos from my camera. HELP HELP HELP PLEASE!

  Hello

  The error code will be a Smart failure or disk Self Test - in both cases, this would indicate that hard is defective and must be replaced.  This is also consistent with startup error.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Satellite Pro L10 - Unmountable Boot Volume

  My Satellite Pro L10 loops in the boot process. After the Windows XP splash screen, the following error messages appears:... Unmountable boot volume... Technical information: Stop: 0x000000ED...

  I know that is nothing exceptional and do a full restore would solve the problem. But I don't want to lose the data (which are of course not saved). I tried a Windows XP disk, but it does not start from the cd/dvd drive by pressing F12 or <0>and change the boot order...

  Can anyone help please?

  Hello

  Hmm, the volume not mountable startup error message appears especially if the HARD drive may not be recognized during initialization. Why? Well, maybe the HARD drive failures or the master boot record is defective!

  If you don t want to recover the laptop, you can try to boot from the XP CD (C press immediately after switching on the laptop) and to start the repair console.

  In the repair console, you can use the command chkdsk/p and after that, you could fix the disk main boot using the fixboot command or / and fixmbr.

  If this does not help, the new installation of the OS is that you as a last resort.

  PS: If you want to save the data you can try to remove the HARD drive and try to connect it via external USB HDD controller to another computer.