How do I interface NI USB 6210 with AC DRIVE (YASKAWA j1000)

Similar Questions

• How can I get the USB-Quad08 with Dasylab encoder channel data

  Hello

  I'm reading the pulse signal of USB-Quad08 with Dasylab V10, but every time I got the error message "this Committee has no meter 9513.

  I have configured the jury with Instacal and the test hardware is ok. I used the module 'Entry meter' (Modules--> inputs / outputs--> MCC - DAQ--> Counter Input) to read the signal of the channel meter. "Entry 9513 counter" displayed and I na not change settings. After connecting a graphic recorder module I run the application. The error message appeared.

  I noticed that USB-Quad08 Council has counter 9513. But why the error occurs?  How can I get his channel encoder signal?

  PS. I can get with Dasylab DIO signals, but I can't any signal with TracerDAQ, even I can't find USB-Quad08 in his list of DAQ devices.

  Please contact Measurement Computing.

• HP Pavilion DV6-2007so: how to make bootable flash USB/CD, with bios WINFLASH bios?

  Hey,.

  IM that flashing caps lock and light above pg up / end keys. No picture at all on internal LCD or an external monitor with VGA connection. No beep at all. Fan turns on, seeing the battery is stable, DVD player works with green light etc.

  I tried Hard reset / cleaning of motherboard and processor + apply new thermal paste / boot without battery / different ram sticks on various slot machines etc. of usual bugs with no luck.

  The code is 2 blinks on NumLock and caps lock shift then 3s break and again 2 blinks, I looked on the HP site it means the bios corruption and just tried to do the restore bios with Windows + B + power button several times, laptop stays on for 10 seconds and restarts and Flash again to 2 continuous or blink code flashes (cpu failure). but 90% of the time of his flashing 2 x and then a few second break.

  I tried to make it bootable bios update usb by following this link:

  http://support.HP.com/us-en/document/c02693833

  Winflash for dv6 2007so files is downloaded those and installed, it starts the utility of update of the hp bios that should give the option to make bootable usb with bios file.

  Once isntalltion simply opens the... insyde bios flash program and asks me to Flash the bios.

  So how can I make automatic start bios update with the other computer?

  THX in advance

  Download the latest HP Diagnostics of material PC 3-in-1 USB stick available in the links below:

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/PC-DIAGS.html

  and create the USB and read page 14 in 'Guide the user to the USB HP PC Diagnostics - Rev 5 (version March 2015) - English' existing document in the USB.

• How to use the adapter USB Y with disk HARD 500 GB V63700-A

  Hello

  My V63700-A500GB external HARD drive is hard to work into my USB2.0 4 port adapter.

  I thought that maybe he needs more power goes into it.
  So I bought a USB - Y, but I can't find out how to use it.

  It has 2 male son of USB connector and a very narrow little that's not in taking wide slim HDD above.

  Anyone who uses these things to advise me how to?

  ... Thank you
  .. .Nick

  Of course you bought the wrong cable.
  I guess you need a USB 3.0 cable similar to [this | http://datalocker.com/wp-content/uploads/2013/09/usb3_cable_white__800px_wartermark.jpg] a

• How to boot from a USB - Portege R500 flash drive

  Hello

  I have a Portege R500 running Windows XP, presented about 2 years ago and recently contracted a virus that has infected some of the startup files as the minute I connect it disconnects again, even in SafeMode! The quickest way I can think sorting is to reformat with the XP Recovery disk and reinstall windows.

  Problem! The CD/DVD drive on the computer laptop stopped working earlier, tried almost everything in the thread on this site, but had no luck.

  So my plan was to boot from a USB flash drive and do it this way. However in the boot parameters I only have the options of HARD drive / floppy drive / CD-ROM / LAN, none of them work. Does anyone know how to boot from USB flash drives?

  Any help would be really appreciated

  Hello

  As far as I know, it should be possible to boot from USB FDD

  I don't know if you would be able to boot from a USB flash drive, but it of certainly worth a try m

  Generally, you can try to press the F12 key when the laptop is turned on.
  A start menu should appear on the screen, then you should see all bootable devices.

  PS: as far as I know the USB startup was available in ToshibaHWSetup (tool of Toshiba which changes the settings of the BIOS under windows OS.) So I guess boot from USB must be possible.

  Welcome them

• Clock and hw external trigger with USB-6210 on Linux with NOR-DAQmx Base?

  I have two devices USB-6210 I need to synchronize so that they both collect data exactly at the same time. I was told by support OR I can send the clock off Dev1/PFI4 and have the two USB-6210 s read the clock in through their own PFI0. I also want to trigger data collected for each device by sending a trigger off Dev1/PFI6 and have two devices to receive the signal on PFI2.

  All my attempts to try this are filled with error messages and my research online seem to say that's not possible with USB devices on NOR-DAQmx Base 3.4.0f2 on Linux.

  I "ve tried using example AI programs and those who do not seem to work either for external clocks. Here is the code I tried:

  #include "NIDAQmxBase.h"#include 
  
  #define DAQmxErrChk(functionCall) { if( DAQmxFailed(error=(functionCall)) ) { goto Error; } }
  
  int main(void){    // Task parameters    int32       error = 0;    TaskHandle  taskHandle = 0;    char        errBuff[2048]={'\0'};    int32       i;
  
      // Channel parameters    char        chan[] = "Dev1/ai0";    float64     min = -10.0;    float64     max = 10.0;
  
      // Timing parameters    char        clockSource[] = "/Dev1/PFI7";    uInt64      samplesPerChan = 1000;    float64     sampleRate = 10000.0;
  
      // Data read parameters    #define     bufferSize (uInt32)1000    float64     data[bufferSize];    int32       pointsToRead = bufferSize;    int32       pointsRead;    float64     timeout = 10.0;
  
  printf("Calling CreateTask...\n");    DAQmxErrChk (DAQmxBaseCreateTask("",&taskHandle));printf("Calling CreateAIVoltageChan...\n");    DAQmxErrChk (DAQmxBaseCreateAIVoltageChan(taskHandle,chan,"",DAQmx_Val_Cfg_Default,min,max,DAQmx_Val_Volts,NULL));printf("Calling CfgSampleClkTiming...\n");    DAQmxErrChk (DAQmxBaseCfgSampClkTiming(taskHandle,clockSource,sampleRate,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,samplesPerChan));printf("Calling StartTask...\n");    DAQmxErrChk (DAQmxBaseStartTask(taskHandle));printf("Calling ReadAnalogF64\n");    DAQmxErrChk (DAQmxBaseReadAnalogF64(taskHandle,pointsToRead,timeout,DAQmx_Val_GroupByChannel,data,bufferSize,&pointsRead,NULL));
  
      printf ("Acquired %d samples\n", pointsRead);
  
      // Just print out the first 10 points    for (i = 0; i < 10; ++i)        printf ("data[%d] = %f\n", i, data[i]);
  
  Error:    if( DAQmxFailed(error) )        DAQmxBaseGetExtendedErrorInfo(errBuff,2048);    if(taskHandle != 0) {        DAQmxBaseStopTask (taskHandle);        DAQmxBaseClearTask (taskHandle);    }    if( DAQmxFailed(error) )       printf ("DAQmxBase Error %d: %s\n", error, errBuff);    return 0;}
  

  When I run the resulting program, I see this:

  $. / acquireNScans-ExtClk
  The CreateTask call...
  Call for CreateAIVoltageChan...
  Call for CfgSampleClkTiming...
  Error-89136 DAQmxBase: route specified cannot be satisfied, because the hardware does not support it.

  For example, a clock and a trigger can be imported via one of the PFI lines by using a USB-6210 on Linux with NOR-DAQmx Base? A clock and a trigger exportable via one of the PFI lines?

  If so, does anyone have the code example illustrating how to do this, or can you at least tell me the names of the lines ("PFI0/Dev1" or other) so I can try again?

  Clues or suggestions would be helpful.

  Thank you

  -Tom

  The clockSource in the example specifies an output rather than an input channel channel. Change source "/ Dev1 / PFI0" solved the problem.

  Please close this post.

• How to make a bootable USB using the disc with El Capitan utilities?

  Anyone know how to make a bootable USB key using the disc with El Capitan utilities?

  Try this its worked perfectly.

  http://www.Macworld.com/article/2981585/operating-systems/how-to-make-a-bootable - os-x-10-11-el-capitan-installer-drive.h...

• Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro?

  Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions?  Please

  Thank you

  Mike Tingey

  The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.

• How to use a USB mouse with 8 Thinkpad?

  Hello!

  I would like to know how to use a USB mouse with 8 Thinkpad. Here in the Brazil, Lenovo does not sell any micro USB USB converters. So, I found on the market several options, but mainly focused for Android tablets and smartphones and not Windows 8.1 devices. He will work with a converter OTG? It supports this type of technology?

  Thank you!!

  You can use any cable USB OTG, it's just the cable and two connectors. I use this Setup with USB keyboard. But it is more convenient to use a Bluetooth wireless mouse.

• How to use a USB microphone with voice dictation on MacBook Air?  Machine recognizes the USB device, but the microphone does not work.

  How to turn on a microphone USB bluetooth with voice dictation (Dragon for MAC) on the MacBook Air?  Machine recognizes the USB device, but the microphone does not work.   I don't see no response.   I use OS X 10.10.

  Version OS X?

• -error message 200284 when calling DAQmxReadAnalogF64() with a USB-6210

  I have tried the code a CVI application to communicate with a USB-6210. I want to start the acquisition to gain 30 samples and then collect them. My problem is when I call the DAQmxReadAnalogF64() function, I get this message error of-200284. The error message means that the data has not yet been acquired in a nut shell. He said I should do to ensure that my startup trigger is configured correctly. I tried to use the internal clock to start the acquisition. I tell myself that I have not configured something correctly.

  In the DAQmxCfgSampClkTiming() function, I set the sampleMode to DAQmx_Val_FiniteSamps I thought I would collect 30 samples (number_of_scans = 30) when I called DAQmxStartTask(). It does not work. When I put sampleMode to DAQmx_Val_ContSamps I can collect data. Here is a stripped down most of my code:

  returnAcq = DAQmxCreateTask ("myAcqTask", & acq_taskHandle);
  returnAcq = DAQmxCreateAIVoltageChan (acq_taskHandle, physicalChannel, "acq_channel", DAQmx_Val_Diff, minVal, maxVal, DAQmx_Val_Volts, "");

  returnAcq is DAQmxCfgSampClkTiming (acq_taskHandle, "OnboardClock", sweepsInterval, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, number_of_scans);.
  returnAcq = DAQmxStartTask (acq_taskHandle);
  returnAcq = DAQmxReadAnalogF64 (acq_taskHandle,-1, 5, DAQmx_Val_GroupByChannel, Data_readings, number_of_scans, & read, 0);
  Disable the task
  DAQmxClearTask (acq_taskHandle);

  I guess my question is: am I set up so that the internal clock will begin the acquisition when I call DAQmxStartTask()? I thought when I put the second parameter in DAQmxCfgSampClkTiming() to 'OnboardClock', this would use the internal clock.

  Thanks in advance for your help,

  Don Pearce

  Don,

  You're right, your task is configured to use a sample clock internal with a trigger for starting the software.  The description of the error pointed out several reasons why people might see this error.  What is the value of 'sweepsInterval '?  I think that as configured DAQmx should be pointing at the speed (in Hz) specified by sweepsInterval.  By the way-1 in the entrance to numSampsPerChan, I think DAQmx will try to read all samples for a finite acquisition (30 in your case).  If you run below 6 Hz, the lira could be the time-out period before these data were available.

  When it is configured as a continuous, what are the values is passed in the sampsPerChanRead parameter?

  Dan

• How can USB-6210 I synchronize two channels of ctr

  Hello

  I use LV 8.5.1 and NI USB-6210. A small application I want to generate two different impulses with synchronization but simple starting point. When I configure a task with two channels the second channel configured always starts a ms later. But, if I configure both channels in terms of frequency, they start synchronously.

  My idea is bad in general? The DAQmx part is fixed.

  Thanks in advance

  Hi there, too.

  the release of the finite pulse trains, to two meters for each task. Therefore, your application will be the first impulse using two output counters and then to exit the second impulse using the two counters.

  Like the USB-6210 don't not have outputs DIO correlated, you'll generate two infinite pulse trains (which can be started at the same time throug a trigger of arms) that you explicitly stop before the start of the second pulse (using the DAQmx abort task from a parallel loop), or upgrade your hardware at least a USB-622 x card series and a digital output model... Alternatively, you can use the PCI-6602 counter card and use a counter to Gate two others doing an infinite impulse train uses a relaxing break...

  Synchronization of two meter in NOR-DAQmx tasks
  http://digital.NI.com/public.nsf/allkb/BB7AE2D12BB04CBE862574FA005D3826?OpenDocument

  Using a counter to generate a redeclenchables Train digital pulses with a PCI-6602 and DAQmx
  http://digital.NI.com/public.nsf/allkb/4A9AF19480E50C6D862571B70058142A?OpenDocument

  Several counters on the same card with a single trigger pulse
  http://digital.NI.com/public.nsf/WebSearch/CE99A0B2A9048A2A86256C630062F550?OpenDocument

  Best regards
  Sebastian

• How to out high-level digital signal (5V from 1V) on usb-6210?

  Hi, I work with a OR usb-6210 and so I did not all channels of analog output that I can use. I hope that I can use the digital output for my application because I am creating a switch I can synchronize my editing. I need 5V output for my device run and currently, I am only able to get 1V.

  -Teo

  Outputs digital are dip lent TTL of the stent, since, your load is attractive more current that can provide the device and drop the voltage. Please provide information on what you are connected to or look at the other posts where users have had exactly the same problem. You probably just a conductor connected to the digital output.

• How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3

  How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3
  Given a PC without hard disk...
  How can you use a flash drive instead?
  So, indeed, the USB key works as an SSD...
  I saw online options that gives partial functionality of the system... and an option that is more than $100 (more than the system's worth)...
  None of these options are acceptable in the circumstances.
  It is an effort to create a machine for a particular use, built from a recycled pc for which hard drive was removed and destroyed by the original owner...
  The criterion is that it must work just like it was a mechanical drive running xp pro sp3 with all updates, etc...
  Thanks for any help.

  You can not install XP on a Flash as his unsupported drive. Your only two options are a traditional hard drive or Solid State Drive (SSD).

  J W Stuart: http://www.pagestart.com

• How to upgrade the already encrypted files on the USB HDD with new XP Recovery certificate

  I backed up the files encrypted in My Documents on a USB drive on which these files are also encrypted state. My computer crashed so I reinstalled the operating system. I wanted to send records encrypted USB HD to my computer or tried to copy projecteurDu and paste them into My Documents. I could not do this because I got "an error occurred in the application...". access privilegesDo i., access is denied. "I created a new recovery certificate and put in place a recovery agent. From there how I update the previously encrypted files on th USB HDD with the new recovery certificate? I'd appreciate a step by step procedure. Can I select the USB drive in the command line and run cipher/u on this drive or make the command/u of encryption on the computer without connecting to the USB HDD

  Sorry to say that my bet is that you never gain access to these files again.

  When you created the files encrypted, Windows creates a key for decryption to access these files and stored, encrypted in your certificate store.  When your system crashed, the decryption key has crashed with it.  Without this key, you will never have access to your encrypted files.  If you have recovered from a backup image-style, you should be able to access these files.  If you've recovered by installing Windows from the installation disc, then you have created a new and different installation with different Secure ID (SID) and a certificate store empty.  A recovery agent will only retrieve encrypted files that were created after that recovery agent was in place - as a new certificate.  What you really need to do, it's your old certificate to restore the backup that you created when you started using EFS.  The following article is mandatory for anyone using the EFS file system.  Special attention to the paragraph entitled "why you should back up your certificates.

  "Best Practices for encrypting file system"
   <>http://support.Microsoft.com/kb/223316 >

  If you do not have a return to the top of your certificate, then things look dark.  There is a program called "AEFSDR' whose 'professional' version comes through what has not been overwritten on your hard drive in search of remains of certificates that could be delivered together to recover.

  Good luck
  HTH,
  JW