How do I manually re-create the site (.ste) for an existing site definition?

Similar Questions

• Hello, how is it possible to create the FAT32 BOOTCAMP on CoreStorage partition via the command line interface?

  Hello, how is it possible to create the FAT32 BOOTCAMP on CoreStorage partition via the command line interface?

  I mean ' diskutil cs * " and so on..."

  Yes, you must use the resizeStack command. Please see Re: how to repair fsck "your drive could not be partitioned..." Bootcamp does not as an example.

• How to create the firewall rule for Windows 7 for javaw.exe?

  How to create the firewall rule for Windows 7 for javaw.exe? The application path differs from the new versions and user profiles. Is there generic symbols allowed for example asterisk?

  Hello

  I recommend you to send the request to another Department for assistance:

  Security in Windows 7

  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/threads

  I hope this helps.

• How to use CSS to create the horizontal navigation bar in Dreamweaver CS6

  How to use CSS to create the horizontal navigation bar in Dreamweaver CS6

  One of the ways to do this is the following: Editor Tryit v1.9

  You can also use floats to get something in the same direction.

• create the code lock for computer book note

  How to create the code lock for computer book notices

  Enter the BIOS, select the Security tab and set the power on password.

  I strongly recommend that you write the power on password and put somewhere safe. If you have forgotten the password turned on, you will find that you will need to send your laptop to be repaired by HP. This is not free of cost. Once a button inside the laptop password reset are over.

  I can't be more precise, as you have not identified your laptop with its full product name or product number.

• How to download MicrosoftFixit50202.msi of the flash player for my not more long computer work - error 0 x 80070002

  How to download MicrosoftFixit50202.msi of the flash player for my not more long computer work - error 0 x 80070002.   I found the site for download fixit, but I have no desktop feature other than the startup repair options.  I thot I could download fixit from my flash drive solution, but I can't find a command prompt to access.  It is the only page from command prompt I can find... I'm in x:\windows\system32\cmd.exe trying to find the good order for my location flashdrive G:

  I used to go G and get G but it says only that go and get are not internal or external commands and not an executable program or batch file

  HELLLLLLLPPPPPPP!   Thank you!

  x:\ I do not think it is a 'valid' for what you intend. I used a 2nd computer and the original disk, I don't remember tho if I used windows file transfer or just copy, but I had the disc copied to the flash drive and reinstalled windows 7. I have still no working dvd rom (x 2) they open and close (sometimes), but the drivers need to be mounted to something incomplete. repair is absent as well. some other problems too but its been executed in this way for months (apx5). here and there, I get an email from answers, that's how I arived here really (enroute) hope this helps (a bit)

• BlackBerry smartphones, I can't enter Thai language. How can I upgrade and choose the operating system for my BB9900?

  How can I upgrade and choose the operating system for my BB9900? I need thai input but on the site of H3G Italy software download is not all the language version. I don't know from which site to download.

  Hi niranaja

  If your device is running always on OS 7.0 then try 7.1 any Pack OS carrier that also supports Languages.But of Southeast Asia before opening your computer and uninstall any previous packs if installed OS on it. After that, try this:

  1. download and install on your PC a pack OS with any language by carriers

  • (Make sure you download for the same phone model)

  2. download and install the latest version of BlackBerry desktop from here BlackBerry desktop software software

  Then using software office perform your full backup of your device.

  3. search your drive C: Vendor.xml and delete them, there may be one or two vendor.xml (on changing your Pc folders option to show the hidden files/folders ):

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\Windows UserName\AppData\Roaming\Research in Motion\BlackBerry\Loader XML

  4. go into C:\Program Files Research In Motion\AppLoader. (For Vista or Windows 7 64-bit, the path will be C: > Program Files x 86 > common files > Research In Motion > AppLoader) double-click on Loader.exe.

  Upgrade will continue then after Installation of the new OS restore your BlackBerry Desktop backup

  Software.

  Once done open BlackBerry Desktop Software (7.1) > select Applications. > in the section of language and support for entry , select the language to be added to the BlackBerry smartphone (a + will appear next to the language to install) > click apply.

  KB13067 : How to get smart BlackBerry phone language packs.

  So please try it and let us know.

  Prince

  _____________________________________________________________________________

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• Failed to retrieve the site definition for the ATG 11.1 site id

  Hello

  I'm trying to access a page /browse created under the site of siteStoreUs in the experience Manager. If I try to access the page of the application, observe the error with the blank page below.

  We work with ATG 11.1

  Please help me to solve this error.

  18:08:32, 401 SEVERE [atg.endeca.assembler.multisite.ExtendedSiteManager] (http-/0.0.0.0:8080-6) unable to retrieve the site for the site id of the site definition: /siteStoreUS: com.endeca.store.exceptions.

  PathNotFoundException: No node found at path: [pages].

  at com.endeca.store.configuration.InternalNode.getNode(InternalNode.java:153) [_DAF. [Endeca.Assembler_slib_sendeca__assembler__core - 11.1.0.jar:11.1.0]

  at com.endeca.store.configuration.InternalNode.getNodeInfo(InternalNode.java:221) [_DAF. [Endeca.Assembler_slib_sendeca__assembler__core - 11.1.0.jar:11.1.0]

  Thanks in advance,

  Ravinder Pogulakonda

  The resolution is here;

  Set storeFactory = / atg/short/assembler/cartridge/manager/DefaultFileStoreFactory in /atg/endeca/assembler/cartridge/manager/DefaultWorkbenchContentSource.properties

  Make sure of course below are configured correctly

  -Site of short Id to the element of site must correspond with the name of the site in the Manager(Ex: If the site name in XM is "homeSite", then Endeca site id in the site item should be "/homeSite") experience

  -Set configurationPath=C:/Endeca/ToolsAndFrameworks/11.1.0/server/workspace/state/repository/ /atg/endeca/assembler/cartridge/manager/DefaultFileStoreFactory.properties

  -Create the user segment in XM to /homeSite as site.homeSite.

  I hope this helps

  Thank you

  Ravinder

• How to change the PCTFREE parameter for an existing table

  How to change the PCTFREE parameter for an existing table?
  
  Guys can you help me please

  Hello

  Of course it is possible.
  In this case you would export the table from the database (using old style exp)
  Start the import with the index_file option to generate the table/index instructions
  Modify the file created and updated the PCTFREE and remove any that need to be performed (default, if I remember correctly, he comments on the statements of the Index)
  Run the file for the table and the index created
  After that start the import with the option "ignore = yes".

  Make sure that you export only this particular table using "tables =
  Also in importing the "ignore = yes" will also be important data that still exists.

  In my view, however, this is not what you want to do. It's more complex, sensitive failure and the table should be deleted, so users are affected unnecessarily long.

  Success!
  FJFranken

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• Unable to create restore point. Vista64. Could not create the scheduled task for the following reason: cannot create a file when that file already exists

  RAID 5 obtained corrupte had to rebuild after that can't create system restore point. Tried everything sfc, fsutil, Dungeon SystemPropertiesProtection screen displaying this error: "could not create the scheduled task for the following reason: cannot create a file when that file already exists." (0x800700B7)"system of work in all other respects. SFC says it found and fixed errors every time I run it.

  Fix tried Della Li: Please remove the WindowsBackup folder in the HKEY_LOCAL_MACHINE NT\CurrentVersion\Schedule\TaskCache\Tree\Microsoft\Windows.

  Delete the WINDOWS BACKUP folder. Unfortunately this folder does not exist.

  Checked VSS, Taskscheduler and other services are runnig

  Tried to boot from the CD and widowed revover. Says no problems. The error to any manulation of the checkbox in the properties of the system, the system protection screen

  Solved

  It turns out that task scheduler got corrupted it have several tasks Scheduler said were not available, but are still in the working directory. These tasks especially SR from compensation directory solved the problem and I can now create backup points.

• WLST Script to create the domain weblogic for IOM and OAM

  Hello

  I intend to set up PS3 IOM - OAM in the new environment. We intend to perform the installation in silent mode. Does anyone have example WLST to create the domain weblogic for IOM or OAM?

  Thank you

  Here is an example of OUD. I post this one since it's the simplest and shortest, but it is the same for OAM and IOM except that the script is much longer because they ask a lot more questions. You will need to export the variables used or replace them with the appropriate values for your system.

  wait-<>

  the value of timeout 600

  spawn ${OUD_BASE}/${WLS_NAME}/common/bin/config.sh mode = console

  # Create a WebLogic domain

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  # Choose the components of the Weblogic Platform

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  # | ___Oracle directory Services Manager - 11.1.2.3.0 [Oracle_OUD1] [3]

  wait {}

  {"Enter number exactly as it appears in the media *" {send "3\n"}}

  wait {}

  {"Enter number exactly as it appears in the media *" {send "n"}}

  # Change the domain information

  wait {}

  "" Enter the value of * "{send" ${OUD_DOMAIN_NAME} \n "}}"

  wait {}

  {"Enter the number of the option to select GOLD *" {send "n\n"}}

  # Select the target area for this domain directory

  wait {}

  {'Enter' new target location GOLD * {send "${OUD_BASE} / user_projects/domains\n"}}

  wait {}

  {'Enter' new target location GOLD * {send "n\n"}}

  # Configure password and username administrator

  wait {}

  {"Enter the number of the option to select GOLD *" {send "2\n"}}

  wait {}

  "" Enter new * "{send" ${WLS_PASS} \n "}}"

  wait {}

  {"Enter the number of the option to select GOLD *" {send "3\n"}}

  wait {}

  "" Enter new * "{send" ${WLS_PASS} \n "}}"

  wait {}

  {"Enter the number of the option to select GOLD *" {send "n\n"}}

  # Configuration mode field-> 1 | Development mode

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  # Java SDK selection

  wait {}

  {"Enter the index number to select GOLD *" {send "2\n"}}

  wait {}

  {'Enter' new JVM Directory GOLD * {send "${JAVA_HOME} \n"}}

  wait {}

  {'Enter' new JVM Directory GOLD * {send "n\n"}}

  # Select Optional Configuration

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  wait {}

  {"Enter the index number to select GOLD *" {send "n"}}

  # Configure the Administration Server

  # Change "Listen port.

  wait {}

  {"Enter the number of the option to select GOLD *" {send "3\n"}}

  wait {}

  "" Enter the value of * "{send" ${ODSM_PORT} \n "}}"

  # Change 'SSL enabled.

  wait {}

  {"Enter the number of the option to select GOLD *" {send "4\n"}}

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  # Change 'SSL listening Port.

  wait {}

  {"Enter the number of the option to select GOLD *" {send "4\n"}}

  wait {}

  "" Enter the value of * "{send" ${ODSM_SPORT} \n "}}"

  # Then

  wait {}

  {"Enter the number of the option to select GOLD *" {send "n\n"}}

  # wait for install

  wait {}

  {"Successfully created * field *" {send "\n"}}

  EXPRESSIONS OF FOLKLORE

• How can I install to get the automatic updates for my drivers on a system Windows 8?

  Original title: hardware device

  How can I install to get the automatic updates for my drivers on a system Windows 8?

  Hello
  Go through the links below, it offers you a complete description of the automatic updates.
  http://Windows.Microsoft.com/en-in/Windows-8/Windows-Update 
  http://Windows.Microsoft.com/en-in/Windows-8/Windows-Update-FAQ 

• I work with dreamweaver cs6 running on Apple Mavericks.  The site definition window shows all different fields by opening. I have to click blind with the mouse cursor in this window until the fields appear.  It is a very bored

  I work with dreamweaver cs6 running on Apple Mavericks.

  The site definition window shows all different fields by opening. I have to click blind with the mouse cursor in this window until the fields appear.

  It is somehow very annoying to complete the connection to the server and all the other things.

  Is there a solution?

  If this is the case, I think that it is perhaps a good idea to uninstall Dreamweaver. Before you reinstall, make sure that your personal configuration file has been deleted (see reinstalling Dreamweaver (or the extensions Manager) fails to solve problems). You should then have a completely clean copy of Dreamweaver has again the default settings of the program.

• How am I able to set the keyboard shortcut for the displacement of the layers vertically ctrl + [and ctrl +]? (CS6)

  How am I able to set the keyboard shortcut for the displacement of the layers vertically ctrl + [and ctrl +]?

  You shouldn't have to they are the default ones. You can change these keyboard shortcuts Application Menus layers organize section. Down is backwards and upwards towards the front