How do I record audio for playback on a CD
Recording of the sounds
I am a teacher and I want to record books on CD for my students to a listening Center. If I use a microphone to record the book with my voice and it records in standard format (which I think is a wav file) it reproduces in a standard CD player? Thank you
I am a teacher and I want to record books on CD for my students to a listening Center. If I use a microphone to record the book with my voice and it records in standard format (which I think is a wav file) it reproduces in a standard CD player? Thank you
=================================
WAV files can be used to create an Audio CD that
should play in any standard CD player. The CDs are
usually 70 or 80 minutes so it will take a lot of
an entire book.
If you have a CD player that reads MP3 files... you
able to convert WAV to MP3 and then you could
create a data CD which would take a much longer
file.
Audio CD / music are based on the data and duration
CDs are based on the size of the file.
Another solution is to copy the file to a Flash
Drive or memory card and the file could be played
most any computer. In this case... to convert the
WAV files to WMA format might be a good idea
because the file size would be smaller.
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
Tags: Windows
Similar Questions
-
How can I record audio now?
Before the update my graphics to a (Radeon 4650) hdmi connection I could record audio. After installing the new graphics card, I had a conflict with the graphics card and my sound card. A very loud snoring through the TV speakers. I use a 42 inch LG tv as a monitor. I get sound on the tv speakers. Because the hdmi connection supports the audio I removed my sound card. Now I can't record audio. How can I record audio now? Need me a sound card to support the recording with a microphone? When I choose the tape recorder, located in the Accessories menu, I get a message that "a recording device is not found. Thanks a lot for the answers!
I went a little less than a year with my card its removed from my machine. I have re-installed the sound card, after I posted the message above. Then, I chose my hdmi graphics card as my default. At this stage no buzzing high strong ground. So far, everything works fine. Thank you for your response.
-
How to slow my audio for my video?
How to slow my audio for my video?
I need to adjust my audio because it's going too fast for my video.
The audio is too fast 1 sec.
Specify the name of the program that you use, so a moderator can move this message to the correct forum
This Cloud forum is not for help with problems of program... program would be Photoshop Lighroom or Muse or?
Exactly what is on the INSIDE of the video you are editing?
A report with details of codec your file, use the following programs... A screen capture works well for people to SHOW what you do - press for Windows Internet explore the PRINT SCREEN key on your keyboard and then do Ctrl + V to paste the screen to the Clipboard in a forum message
Free programs to get information on the post http://mediaarea.net/en/MediaInfo/Download PC/Mac files in tree
.
Your video using a VARIABLE rate? See https://forums.adobe.com/thread/1110005
If so, use https://handbrake.fr/ opensource transcoder/converter to convert to constant cadence
-
How to record audio programs in windows 7? -in previous versions of windows, I could use the main volume control to select "wave" and that way save audio playing on other programs playing through windows and using windows as a simple sampling devicem - I have a relatek 11 hd audio device/card's directx - in audio devices ControlPanel / / / / material/sound/manage / I see only selection of recording for the microphone or line - how can - record sound through windows 7 - can I buy a cable and put it in the headphone and microphone - I'm trying to address the problem in a way that is now not in windows - I want to play things and recording in a small way - could you provide an answer on how audio intgrates of hardware and software with windows - I can't believe really wanting I could do on the previous windows versions - please help
Start - All Programs - Accessories - Sound Recorder will launch the utility. You can easily find it by running aid and entering "sound recording."
Right click the speaker icon in the system tray, select recording devices and set the desired default entry.
-
It is a continuation of a Thread by bmagown under "BlackBerry" 8300 Series Smartphone - BlackBerry Curve section of the forum which can be found on:
The behavior you see here may vary according to the model of smartphone BlackBerry due to the fact that it is mainly based on the underlying hardware of the BlackBerry smartphone. Recording and simultaneous playback is possible on some models, however that a codec can be used at the same time. This means that you need to record and play using the same audio format.
-
How can I adjust audio for synchronization?
Every song that I synchronize my mp3 has a different volume level. How to fix this before the synchronization process?
Hi VIkkiGarner,
How you try to synchronize?
See the documentation for your device for all parameters set the audio.
You can see
-
I have a few questions about it.
#1. What are the API to record audio?
#2. How do I record audio (for example in what format?) and how do I specify the media to record the audio in?
#3. Is it possible to record audio while the application is not in the foreground? Is there something special I need to do?
#4. Is it possible to record calls?
Thank you.
String url = "file:///SDCard/BlackBerry/Music/myfile.dat" FileConnection conn = (FileConnection) Connector.open( url, Connector.WRITE ); if( !conn.exists() ){ // create the file conn.create(); OutputStream _output = conn.openOutputStream(); // use output stream as it is shown in the sample .... _rcontrol.setRecordStream(_output); ..... }
-
How to video and Audio recording in a single file like Default BB Video Recorder?
Hello
Is it possible to record audio and video in a single file using... Something like default video recorder. My goal is to spread this record to the server using SocketConnection. I aired successfully on video, but it contains no audio...
Manager.createPlayer ("capture://video?" +
); I went through another post and did not find anything.
Is - this possiable for recording audio & video single instance? ...
I tried after coding
- Encoding = video/3gpp & mode = standard
- Encoding = video/3gpp & mode = mms
- Encoding = video/3gpp & width = 480 & height = 352 & video_codec = MPEG-4 & audio_codec = AMR
- Encoding = video/3gpp & width = 176 & height = 144 & video_codec = MPEG-4 & audio_codec = AMR
- Encoding = video/3gpp & width = 480 & height = 352 & video_codec H263 = & audio_codec = AMR
- Encoding = video/3gpp & width = 176 & height = 144 & video_codec H263 = & audio_codec = AMR
Unfortunately, none of them contained Audio...
How can I record Audio using the single instance of player of the & video? is this possiable? ...
(I am able to convert 1 encoding raw .3gp file using YouTube downloader)
Help, please...
Thanks in advance...
Yes, he does. I do usually just #1 but I don't know how it works on the Simulator.
-
Qosmio F10: How to record audio and video and use QosmioPlayer
I am owner of a Qosmio F10-122 with TV tuner and I really need HELP. I'm Italian.
The questions are:
1 QosmioPlayer version 4.0.1 (2005022812) (according to the procedure of the forum) has installed fine but the sensitivity is poor; in any case the question is: is is possible to record videos? Also is it possible to record audio?2 input and video output are stupid; I can see Windows and QosmioTV on HDTV via DVI/SCART but I can't input in MCE TV or QosmioPlayer any signal IN Composite; so the question is once again how can record AUDIO from my Home stereo or VCR VHS VIDEO?
3. I only use VIDEO IN to WATCH is not to save: where is my fault?
Thanks, Marco
Hello Marco
I did some testing and I can tell you about my experience on Qosmio G20.
1. as far as I know early versions of Qosmioplayer did not have the registration option but now I hope that your preinstalled version has REC option. If so, please be sure that you have about 5 GB of free space for the recorded material.
It is not important what signal is sent to your Qosmio (TV or VCR VHS-connected) you can find it if you look at the channels. With REC option, you can save what you want. I tested it with my VCR VHS and I recorded some old movies. This material was recorder und great quality was the same as on cassettes. After recording, I started Windows MCE and transferred the material recorded in Windows using Qosmio player utility.
I have not tried, but I put t think you will be able to record audio using only Qosmioplayer.
2. you can record movies VHS if you connect your VCR VHS on the Qosmio using the antenna cable. Launch Media center Edition (TV option) and scan channels. In my case, I could watch movies VHS on MCE on channel 31. Using REC option you can save all documents of video cassettes. Later, you can change the recorded material and create own DVDs. It really isn't a problem.Your audio Home Audio recording can be a bit more problematic, and if you want it to be on the professional path you will need a device external and of course some professional recording software.
3. I don't know what to write here. Just try to do what I already descriebed under 1 and 2.Good bye
-
How to combine several digital inputs for playback?
Hi comrade Labview users.
I just started using LabView and I am very new to it. I know him understand how it works and you have something to work, but I need to be more effective.
I use DIO96H - USB DAQ Measurement Computing, which includes 96 digital inputs. I use the DAQ to acquire the activations of relay and record the number of times the relays flips.
Basically, I created a digital input read and then copy & pasted 95 times... it works but I know that's not the best way to use LabView.
How can I change the digital input (Di1/1stPortA/dev0) in multiples so that it iterates through all 96 channels without copying and pasting the same pattern over and over again?
Leon
You have the correct polymorphic instance for playback? Once again, for the material OR it would be a NChan Read. There should be a similar choice if I remember correctly.
-
How to record audio on my computer
If I want to take a dictaphone which was held hand and record audio on my computer, how can I do this windows 7 is what I
Hi monkey763,
If you can connect the recorder to the computer, for example by using a USB connection, you can set the recorder of the Word as a recording device using the following steps:
- Right click on the speaker icon in the notification bar (lower right part of the screen near system clock)
- Select the recording devices
- Select the dictaphone
- Select set default
Let us know if that helps.
-
How can I purchase AppleCare for Apple Watch record?
I don't know how to buy a record AppleCare for my Apple Watch...
Click here and see the bottom of the page.
(142157)
-
I have a Pavilion Slimline S3300T. KC833AV prod # #ABA. OS vista Home Premium 32 bit. The sound card will allow me to record audio directly from the internet?
The sound card is not big thing to do with it, but there are third party software out there that will allow you to do.
WaveTap is recommended by LifeHacker.
Here is an article on their website explaining how to use it:
WavTap Audio recordings of your computer by pressing a keyboard shortcut
-
Satellite L500-113 - how to record audio from the Web site?
I have a L500-113.
I am the controller program for an Internet radio station and want to record audio streaming from our website. Regardless of the recording software, I can record only since the built in MIC, even if the flow is fortunately playing on my computer. No other recording device is displayed in Device Manager. Surely I can record of built in the card Realtek sound? I installed the latest drivers/Manager Realtek from Toshiba.
Any help would be appreciated.
Thank you
Hi mate
I think that the laptop supports a Realtek audio chip.
I have a laptop with the same Realtek audio chip and I can record the audio stream of a Web site.I m using a free tool called no. 23 Recorder.
Google for it and you will find some details! -
I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?
If you are looking to get audio only from a YouTube video, all you need to do is read your video and while it's going to copy the link. Then on another tab, open listentoyoutube.com. Just follow the easy directions and paste the link.
Hope that helps. I found out a month ago and I have 4 CD made from these audio files. There is a lot of fun to find obscure stuff and making CD of songs.
Jon
Maybe you are looking for
-
So never had a problem in the past, but I try to sync the albums selected on my ipod, I sort iTunes plug in select the albums that I want and click on synchronize. It is synchronization of the songs for about 1 min then saying its full but when I go
-
I uninstalled the program Vostern and changed my default back to firefox, but every time I open my browser it goes back to Vostern. I don't know what else to do.
-
After update my Pro iPad with iOS 9.3 iPad crashes on Safari. Example I googled something results appear, but I am not able to enter any page
-
I lost my iPhone6 and I don't know who stole, how can I get it back?
I lost my iPhone6 and I don't know who stole, how can I get it back?
-
How to find valid cases in the truth table?
Hello I am using a truth table to select the next case in my state machine. The number of possible cases is 256 with a set of 8 input of Boolean values. The following is a generic example. Obviously, I don't need the conditions of passage, but how to