How do I reference col tabular report in the onChange event of Txtfield

Similar Questions

• How keep radiogroup verified to the tabular report after the validation error?

  Hello!

  I have a tabular report with radiogroup fields, and when I try to send the page, if the validation does not pass by, my radiogroup fields unchecked.

  Does anyone know how to prevent this?

  If I can't fix this evil must pass the JavaScript validation.

  I use the version 4.2.1 of the apex

  EgaSega wrote:

  If I can't fix this evil must pass the JavaScript validation.

  ZAPEX wrote:

  There is no harm in using JavaScript validation to proceed with it.

  You can not 'show' validation JavaScript, and there is a lot of prejudice based on this alone.

  JavaScript validation can be used in addition to the validation server-side such that it can easily be turned off or bypassed in the browser. Any JavaScript validation in the browser in order to improve the user experience needs to be duplicated on the server to ensure that the controls provided have been performed.

• How update a field in a report whenever the page is refreshed?

  Hello
  
  I have a pain with the logic below field:
  
  If the Date deadline > SYSDATE and end Date = NULL then
  Suffering: = Date deadline - SYSDATE
  End
  
  How can I change a field suffering in a report whenever the page is refreshed?
  
  Thank you
  Guy

  Hello

  Try to add a column to your SELECT statement.
  CASE
  WHEN G IS NULL
  THEN
  NULL VALUE
  WHEN (F IS NULL) AND (G<>
  THEN
  SYSDATE - G
  WHEN (F IS NOT NULL AND F > G)
  THEN
  F G
  ON THE OTHER
  NULL VALUE
  FINISH as difference

  Kind regards
  Dimitri
  ----------------------------------
  http://dgielis.blogspot.com/
  http://www.apex-evangelists.com/
  http://www.apexblogs.info/
  AWARDS: Don't forget to mark correct or helpful messages on the forum

• How to write a script to report to the page number in a book?

  Hello

  Is it possible to write a script to report to the page number in a book by pop up a text file.

  What I'm trying to say:

  first of all, I opened an indesign book, thenI run the script, the script can gen a text pop-up file and the list of files, the file names and page numbers (only the star number of each file) and the script can also tells me that I have two files or more overlap page numbers (if any).

  sample:

  

  report like this:

  01 table of contents 1
  02 2 Summary
  03 the financial of the 3 games
  Statement by the President 4 04
  05 MD and A                                 7
  06 12 CG report
  Report of the directors 07 17
  08 18 auditor's report
  Profit and loss account 09 19
  profit and loss 20 10
  11 equity change 20
  Cash 12 21
  13 notes on the 22 account
  14 42 corporate information

  File have the page number of overlap:

  profit and loss 20 10
  11 equity change 20

  Thank you

  Is that what you need?

  var book = app.activeBook,
      _content = [];
      overlap = [];
  for(var i =book.bookContents.length-1;i>=0;i--)
  {
          _content.push(book.bookContents[i].name + "\t" + (book.bookContents[i].documentPageRange.replace(/-[^-]+$/g,"")) + "\r");
          if(book.bookContents[i].documentPageRange == book.bookContents[i-1].documentPageRange)
          {
                  overlap.push(book.bookContents[i].name + "\t" +book.bookContents[i].documentPageRange + "\r" + book.bookContents[i-1].name + "\t" +book.bookContents[i-1].documentPageRange);
              }
      }
  alert(_content.reverse());
  alert(overlap.reverse())
  

  Kind regards

  Cognet

• HOW TO ADD A SPECIFIC DISCO REPORT TO THE USER IN FUNCTION MENU

  Hello world
  
  We use DicovererPlus. Our customers want to reach a specific report (often used) in access to its menu in function.
  
  I know that it is possible to reach DiscovererPlus from the screens of forms, but is it possible to send a report of the menus?
  
  Thanks in advance.
  
  Cagri

  You can consult the page of Anil Passi:

  http://Oracle.anilpassi.com/invoke-discoverer-report-from-Oracle-applications.html

• How to pass multiple values of payload through the contextual event - jdev 11.1.2.3

  Hello:
  
  How to configure contextual events publish several values of payload?
  
  On click of a button, I'm declaritively publish a contextual event, which works very well when a single value is passed to the event handler.
  
  My event handler method has the signature of:
  eventHandler (String)
  
  But now I also have an oracle.jbo.domain.Number, so my new eventHandler looks like this:
  eventHandler (Number, String)
  
  How to pass two values during editing of the event and how to place the payload with multiple values for the new eventHandler?
  
  All article or code would be greatly appreciated.
  
  Thanks for the help.

  You define a bean holding your values and pass an instance of the bean as a payload...

  Timo

• How to integrate a BI publisher report into the fusion app home page?

  Hello

  I have been a proponent of the ADF, new fusion app and BI publisher. We use Oracle Fusion Application version 11.1.7.0.0 for the implementation of compensation and BI publisher is a part of it.

  
  

  I developed a report editor BI, placed under the shared folder-Custom, to incorporate the same in the merger enforcement home page. By following the video How to embed a report in a dashboard sale?-YouTube, I followed steps below

  
  

  1 administration-> work area page to customize

  2. add content

  3 click on "reports and analytics.

  4. click on 'BIPresentationServer '.

  5. file sharing

  6 custom

  
  

  Question: If I have reports under this 'Custom' folder, it says "empty folder". It shows that the 'analysis', but not all reports. Problem is not with this single file but all. I also made sure that I am able to see all the reports when I browse using Navigator-> tools - > reports and analyses.

  
  

  Anyone of you can guide me on what is the issue and what to do?

  
  

  Thanks in advance.
  

  Thanks for the link. I'm reading for a better understanding.

  I come to know of SR that in order to see the BI Publisher in the list of servers of presentation of values, we must incorporate the report BI Publihser inside an OTBI dashboard.

  So we need to create a "Dashboard" folder (it is wort then only we are able to see via fusion apps. Select and integrate), dashboard and then and add the report wanted to this dashboard. Now we can navigate to this dashboard, open it and select the page to include it.

  Could be useful for the ppl who faced a similar question. Thank you.

  Rambeau

• How to generate an output PDF report when the layout template is an Excel file in the editor of BI 11.1.1.7

  That's what I did...

  1. create the new report

  2 create a report using an existing data model (browse and choose a data model)

  3. How do you create your report? (click used report editor)

  4. click on finished (and then saved the report)

  5. then he asked me to create the page layout (I chose to download or generate a layout and then traveled to a downloaded my model with XDO_ * the columns of the excel data model mappings)

  Template file = model Excel, locale = English (United States)

  5. click on Upload

  6. then click view the report top-right, which has opened my file name of "my_report_layoutname.xls" with sheet report 1 (OPE all mapped very well) and a sheet of xdo_metadata.

  I just wanted to step 6 is a sheet 1 pdf report.    How do I do that?  Could not find the place where I can clarify that.

  Mr. Jamal

  Layouts Excel generate only one exit Excel. (CSV takes no account of the provision is therefore an option for any layout.)

  You use RTF or PDF or page Template Builder (XPT) layouts to generate PDFS.

  The LOV to find output formats by modifying the report and selecting a list.

  The table has a column to the output formats, it is controlled by the format of the presentation that you have built.

  Kevin

• How to load data from matrix report in the base using ODI table data

  Hello
  
  How to load matrix report data in the base table data using oracle Data Integrator?
  
  Description of the requirement:
  
  This is the data from matrix report:

  JOB                       DEPT10                DEPT20  
  ___________________________ _____________
  ANALYST                                           6000
  CLERK                   1300                     1900 

  Need to convert it to the format below:
  

  JOB                             Dept                        Salary
  _____________________________________________
  ANALYST                  DEPT10      
  ANALYST                  DEPT20                     6000
  CLERK                       DEPT10                    1300
  CLERK                       DEPT20                    1900
      

  Thank you for your help in advance. Let me know if any other explanation is needed.

  Your list seems to be a bit restrictive, you can do much more with the procedures of ODI.

  If you create the new procedure and add a step. In the 'source' tab command you define technology and pattern according to your source database. Use the unpivot operator as described in the link, please, instead of using "SELECT *' use the column names and aliases for example:"

  SELECT workstation,
  deptsal as deptsal,
  saldesc as saledesc
  OF pivoted_data
  UNPIVOT)
  deptsal-<-->
  FOR saldesc-<-->
  IN (d10_sal, d20_sal, d30_sal, d40_sal).<-->
  )

  Then in your tab 'command on target' defined technology and drawing on your target db, then put your INSERT statement for example:

  INSERT INTO job_sales
  (employment,
  deptsal,
  saledesc
  )
  VALUES
  (
  : job,.
  : deptsal,.
  : saledesc
  )

  That's why you use bind variables from source to load data into the target.

  Obviously if the source and target table is in the same database, you can have it all in a single statement to the "command on target' as

  INSERT INTO job_sales
  (employment,
  deptsal,
  saledesc
  )
  SELECT workstation,
  deptsal as deptsal,
  saldesc as saledesc
  OF pivoted_data
  UNPIVOT)
  deptsal-<-->
  FOR saldesc-<-->
  IN (d10_sal, d20_sal, d30_sal, d40_sal).<-->
  )

  also assign the log count "Insert" on the tab corresponding to your INSERT statement, so that you know how many rows you insert into the table.

  I hope this helps.

  BUT remember that this feature is out in Oracle 11 g.

• How do I deploy forms and reports in the new upgradation of OAS?

  Hi all
  
  I have a request. I have Oracle Application Server - 10g release 1.
  Now, I've updated OAS 10 g release 2.
  
  1. What are the steps necessary to deploy forms and reports that newly installed OAS?
  
  2. do I need to recompile all the FMAS / MMB / PLL etc.,.
  
  4. do I need to put all the files as the conf file, EPS file?
  
  3. are there documents if you please provide links?
  
  Thank you all
  SAI
  
  Published by: user12045030 on August 24, 2010 06:58

  N ° you must recompile the .pll, the .fmb and the .mmb

  François

• How to get deployed CA Project details about the deployment event?

  Hello

  I need to get the Details of the project deployed certification authority (I just need the name of the project), based on the events of deployment (which has the deployment id). I tried to get the details of the epub_deployment and epub_deploy_proj, but the data are not persistent here once the deployment is complete.

  Please let me know if you have any ideas how I can do this.

  I do this to determine the name of the project that caused the indexing run in integration of the atg-short. With this proj. name, I want to do some other actions.

  Any help/pointers will be greatly useful.

  Thanks in advance,

  Arjun

  Assuming you are trying to get the details of the project in your custom Java code, here's my thought. Not tried it myself, but I guess it can help to get what you are looking for. Let's say you have the available as a objDeploymentEvent DeploymentEvent object so you can proceed as

  
  String[] projectIds = objDeploymentEvent.getDeploymentProjectIDs();  //get the project IDs being deployed
  
  ProcessHome processHome = ProjectConstants.getPersistentHomes().getProcessHome();
  
  //first get the involved Process object for a particular project-id then get the corresponding Project object
  Process process = Process.findProcessByProjectId(projectId);
  Project project = process.getProject();
  

  For details of the method and the properties of the object you can view the API documentation classes mentioned, all are atg.epub.project of the package with the exception of DeploymentEvent. It will be useful.

• Conditional statements and tabular report

  Hello
  
  I have a tabular report with the following source:
  
  Select
  "RISK_SEQ,"
  RISK_SEQ_DISPLAY "RISK_SEQ"
  "RISK_PRIORITY,"
  "RISK_INFO,"
  "RISK_MITIGATION,"
  "ONGOING_FLAG,"
  "RISK_DATE,"
  "WEEK_GROUP_SEQ,"
  "CREATED_ON"
  "CREATED_BY."
  "LAST_MODIFIED_ON,"
  'LAST_MODIFIED_BY '.
  of ' #OWNER # '. " RISK. "
  
  I want to do is create a conditional so that the drawn elements are only following this condition:
  
  WEEK_GROUP_SEQ = select week_group_seq from week_group where project_seq =: P14_PROJECT_ID and week_index = 0;
  
  So my question is when I created my conditional is similar to what I wrote above? I tried 1 Expression = Expression 2, but it did not work, which means that it returns any line.
  
  Thank you!
  
  Jon

  Jon,

  If it were me, I would simply in the WHERE clause to your tabular presentation.

  Of course, you are the only person who can decide how to deal with when there is no value in your: p14_project_id post - show all lines or show no.

  For example:
  Bq. SELECT "RISK_SEQ",------'RISK_SEQ' risk_seq_display,------'RISK_PRIORITY',------'RISK_INFO',------'RISK_MITIGATION',------'ONGOING_FLAG',------'RISK_DATE',------'WEEK_GROUP_SEQ',------"CREATED_ON",------'CREATED_BY',------'LAST_MODIFIED_ON',------"LAST_MODIFIED_BY"------OF "#OWNER # "" RISK "-WHERE"WEEK_GROUP_SEQ"= NVL ((SELECT week_group_seq \\ DE week_group \\ WHERE project_seq = NVL (: p14_project_id,-1)-AND week_index = 0),--1)
  ;

  It would show no lines when the element is empty, assuming that the values cannot be negative.

  Good luck

  Stew

• How to pass references to XYGraphs to report Subvi w/o showing Subvi?

  I work at a request of customers, and he had the XYgraphics on the frront Panel. I'm working to modularize the program some to manage better code space. I'm currently passing the XYGraphs (2) of the Subvi to add graphical display to my reports. I must of course set the Subvi to show during the execution, so that temp bmp which is used for the handle graphics figure is created and passed to the excel or any other reporting tool. So my question, is there a way to transmit XYGraph references I can use directly to the report (e.g. XYGraph temp bmp main application file, instead of the copy in the Subvi? This removes this window of the screen for the generation of reports. Ideas appreciated?

  I finally found the Subvi feature to make the transparent Subvi, so I could show to get the file bmp temp chart for the report, but the user does not see it.

• How can I include results of a subsequence, which takes place in a new thread in the test report from the main sequence

  Hello!

  I have ", working with the Version 4.2.1 of TestStand. I have a main sequence, which sous-séquences of different calkls. All these steps are reported correctly. One of the subsequences works like "new thread". How can I include his results in the common test report of the main sequence?

  I have variable markes of the subsequence as is required for the test report (it works OK if it's not a new thread). If the digital test, which is performed in this subsequence is correct, I get no results at all. If the digital test could not get a "message in red" who whithout having failed to test any reference to step somewhere in the report of the main sequence or values of vaiables that were not correct.

  I tried an option 'on the fly' in the Configuration of the report, but n ' got no useful result. What should I do?

  Best regards

  Hello Pericles,

  You can use a queue time for the results of the wire once it ends. Place a waiting time after the call to the thread in your MainSequence at the location where you want the results to add to the report (compared to other results). In the waiting step Setup tab, select wait: Thread the threaded sequence, and then select call to specify sequence call the radio button. You can also use an object reference if you need results if poster somewhere where elsewhere - you would just add an object reference to the appeal of sequence threaded in its thread settings dialog box.

  I hope this helps.

  -Jack

• JavaScript allows you to create cascading LOV to the tabular report only works on level 1

  I'm trying to implement a LOV cascading to a tabular report.  I have been using an example by Denes Kubicek (https://apex.oracle.com/pls/otn/f?p=31517:315).  I am able to get this example works when I'm on the workspace hosted APEX (workspacehttps://apex.oracle.com/pls/apex/f?p=67254:1 = COA demo/demo).  The example works as expected in the space of organized labor.

  My problem is when I take the application and import in a workspace internal APEX LOV Cascading sets the value of the first row in the table report; However, it does not define the following lines, and it does not dynamically change the values in the first rows of LOV, when another Department is selected.  I also tested the results by exporting the application on internal site to the hosted site. It works perfectly on the hosted site, but not inside.  Our internal APEX site is running version 4.2.2.00.11.

  The JavaScript code that is executed in dynamic Action is:

  elem var = ' # ' + this.triggeringElement.id;

  var = key "#", "f02_" + this.triggeringElement.id.substring (4);

  var set_list = ' # ', 'f04_' + this.triggeringElement.id.substring (4);

  var key_val = $(key) .val ();

  var elem_val = $(elem) .val ();

  var selected_val = ";

  (apex). Server.Process

  "getEmployees"

  {

  x 01: elem_val,.

  x 02: key_val

  },

  {

  success: function {(pData)

  $(set_list).find('option').remove ();

  $(pData, fonction (clé, innerjson) {} .each)

  $(set_list) .append ($("< option >', {})

  value: innerjson. VALUE,

  text: innerjson.NAME

  }))

  If (innerjson. SELECTED! = ") {selected_val = innerjson. SELECTED};

  });

  If (selected_val! = ") {}

  $('select'_+_set_list_+_'_option').each (function)

  {this.selected = (this.text == selected_val) ;})} ;

  }

  },

  }

  );

  Is it possible that our internal environment lacks some features used in code? How can I check to see if we have a missing function?  There are other reasons that the two environments react differently?

  Any help would be appreciated.

  Thank you

  PAM Zaske

  City of Arvada

  Arvada, Colorado

  Hello

  DBA should copy all images and static files to install image file zip to the web server.

  And of course old files need to be replaced.

  What web server you are using?

  Browser of witch you use when you test?

  When you test check browser console if there are JavaScript errors.

  Kind regards

  Jari