How keep radiogroup verified to the tabular report after the validation error?
Hello!
I have a tabular report with radiogroup fields, and when I try to send the page, if the validation does not pass by, my radiogroup fields unchecked.
Does anyone know how to prevent this?
If I can't fix this evil must pass the JavaScript validation.
I use the version 4.2.1 of the apex
EgaSega wrote:
If I can't fix this evil must pass the JavaScript validation.
ZAPEX wrote:
There is no harm in using JavaScript validation to proceed with it.
You can not 'show' validation JavaScript, and there is a lot of prejudice based on this alone.
JavaScript validation can be used in addition to the validation server-side such that it can easily be turned off or bypassed in the browser. Any JavaScript validation in the browser in order to improve the user experience needs to be duplicated on the server to ensure that the controls provided have been performed.
Tags: Database
Similar Questions
-
Please help me understand how to install updates with the following error Message
The following updates were not installed:
Security for Microsoft XP KB 2289162 update
See the section "How to get help" of http://support.microsoft.com/kb/2289162
For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
How to get rid of the 1935 error in windows 7
How to get rid of the 1935 error in windows 7
See:
FIX: An installation may fail with Error 1935 when an .msi file
-
My OS has been upgraded to Windows 7 at 10 without disabling the software Adobe Acrobat.
I am currently not able to use the serial number. to validate the (Acrobat 9.0) software installed on the machine.
How can I go on the validation of the software now?
Try contacting the Adobe Support via chat and ask them to reset your activations - don't ask more than that or they are likerly tell you to look on the forums for help (where no one can help with reset).
To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.Serial number and activation support (non - CC) chat
https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp -
APEX_ITEMS does not store the value in the SESSION after the validation error
Hello
I'm build dynamically using APEX_ITEMS, but it does not keep the value when the page is submitted and the validation error occurs. Here are the following steps that I am following.
When I enter SUE (more than 8 characters), SUBMIT, validation fails and the error is displayed on the page (which is fine)
BUT it does not keep SUE value (which I got) and filled with the old value which is ABC.
WHY it does not keep the value that the user entered (even as the normal Page items)
Region PL\SQL
Validation (function returning the error text)declare v_value varchar2(20); begin v_value := 'ABC'; htp.p(apex_item.text(7,v_value)); end;
DECLARE v_count number; v_value varchar2(50); v_value1 number; BEGIN v_value := apex_application.g_f07(1); select length(v_value) into v_value1 from dual; if v_value1 > 8 then return 'Field must have less than 9 character'; ELSE return null; END IF; END;
You use collections if you want the State to show if, after a validation error. Unfortunately, this is the case if you do not use the normal tabular forms.
Denes Kubicek
-------------------------------------------------------------------
http://deneskubicek.blogspot.com/
http://www.Apress.com/9781430235125
https://Apex.Oracle.com/pls/Apex/f?p=31517:1
http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
------------------------------------------------------------------- -
The validator error will take after clicking twice on the component
Hello
I have two components selectOneRadio in my form of the ADF. The possbile for these radio buttons values are 'Yes' and 'No '.
I put the validation that when sending in the value of the form for the radio button should not be 'no '. That's why I implemented the valiadator on these components and it works perfectly fine.
However on UI I see that when the validator error when after selecting 'no', I again click that radio button, the error popup go away. So that the user sees that he chose the 'no' for two option buttons, but actually inside the latest is not selected, I got to know after registering or submitting the task. This bad guide the end user.
Question:
How can we keep the pop up consistantly poping when validation fails OR the user to display the currently selected values?
Please let know us if there is a way to solve this problem.
I use 11.1.1.4.0 and weblogic 10.3
Concerning
AmitHello
see this: https://blogs.oracle.com/jdevotnharvest/entry/using_javascript_to_clear_validation_error_messages
Frank
-
I have several validators. When you do something invalid, it selects the field and has a message if you put in this field. I understand that you can include an error object in the validator which will cause a popup with error.
(1) how do you that?
(2) maybe important text in the window?
(3) do I need several validators or I use one and if so how would I change the message to reflect the current verification field?
The line:
for each {(validatorErr to validatorArray)
Must be:
for each {(validatorErr to validatorMsgArray)
-
How to add sound to the General error handler
I'm looking for an easy way to create a sound signal (beep or something) when the General error handler displays an error message. Someone at - it suggestions?
Hi Bill,
make a shell vi containing the error handler and an additional function of "beep". And that's...
-
How to get rid of the ddl errors because I can't change my theams in windows xp
I don't know what is happening that I can't have my XP theams. every time I'm doing it, it says "to help protect your computer, windows has closed this program."
Run the DDL as an application
Hi vicky9999,
1. which version of the Service Pack is installed on the computer?
2. What is the exact error message you get?
3. when exactly you get the error message, you it when changing any particular theme of Windows or any custom theme?
Run the SFC (System File checker) Scan. To do this, follow the steps below
a. installation with Windows XP in the drive disc
b. Click Start, click principally made programs, accessories, and click command prompt
c. type the following command and press ENTER:
sfc/scannow
The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
Check whether the problem is resolved
Kind regards
Manasa P - Microsoft technical support. -
How can I fix defender of windows with pointer not valid error 0 x 80004003
How windows Defender ifix with pointer not valid error 0 x 80004003
Hello
· When you get this error message?
· You have security software installed on the computer?
Step 1: Temporarily disable the security software and check if it makes a difference.
Disable the anti-virus software: http://windows.microsoft.com/en-SG/windows-vista/Disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
-
Customize the validation error message
If the validations are missing (say point level), the error messages say something like this:
2 errors
error message to the user for the validation of the 1st
error message to the user for the validation of the 2nd
How can I remove the text "2 errors occurred"?
Why I want this is because my page has 2 level point and level 1 validation validations page. Page-level validation check several business rules and raise errors for them all. so, essentially, if all validations on this page fail, I get
3 errors
but in fact there may be more than 3 error messages because level page validation is throwing error for multiple controls.
Where can I remove "3 mistakes occurred" or customize to say "Error (s)" instead.
Thank you
RNHello
Let's see if it works for you.
Remove the number of errors error message occurred
Thank you
Tauceef -
Application process, do not run after the validation error
Hi all.
APEX 4.1
XE 11 GR 2
WIN7
Firexfox
I have a page where I add additional javascript code to a page by using htp.p in a process of application "before the footer. It works fine as long as there is no validation error. When the validation fails (for example a UK-check with the location of the error value "Inline notification"), the page is re-fondue, but the application process is not running and so my extra code is missing from the page.
Is this intended behavior or am I doing something wrond?
Andreas
Addition:
I tried the sam using a 'local' page process, but these do not seem to fire.
Published by: Andreas Weiden on 22.12.2011 21:31Andreas Weiden says:
Is this intended behavior or am I doing something wrond?
This is the expected behavior. Generally, the process and calculations source item, the actions are not executed when the page is re-made after validation errors. They also provide great potential for confusion of side effects (for example reset to a default value for an item that had an invalid value sent).
However, the engine provides a special treatment for the process with the built-in Inline Validation errors displayed condition so that they will be run when a page is rendered with validation errors. See + {: identifier of the thread = 493070} + for an interesting discussion on this topic.
An alternative (and in my opinion a more classic and rather more clear) would be to generate the JS in a dynamic region of PL/SQL code on the Page zero. Always reuse the code on all or several pages, but is more clearly part of the rendering of the page as an application process and does not rely on a very obscure condition, being the only way you can make it work.
-
Form when he passes the validation errors validatator show:
For some reason any in this form when he submits successfully (pass validation) the mistakes of validatator show:
<? XML version = "1.0" encoding = "utf-8"? >
" < = xmlns:fx s:Panel ' http://ns.Adobe.com/MXML/2009 "
xmlns:s = "library://ns.adobe.com/flex/spark".
xmlns:MX = "library://ns.adobe.com/flex/mx".
xmlns:layouts = "" views.layouts. * ""
creationComplete = "creationCompleteHandler (event)" "
skinClass = "views.skins.BlueTopPanelSkinWithBlueRedGradient" title = "Log in" xmlns:parsley =" " http://www.Spicefactory.org/parsley "> "
< s:layout >
< s:VerticalLayout horizontalAlign = "center" verticalAlign = "middle" / >
< / s:layout >
< fx:Script >
<! [CDATA]
Import model.vo.AuthenticateUserParams;
Import model.vo.WindowsActiveDirectoryUser;
Import mx.collections.ArrayCollection;
Import mx.controls.Alert;
Import mx.events.FlexEvent;
Import parsleyMessages.UserLoginRequest;
[MessageDispatcher]
[Bindable]
public var Dispatcher: function;
protected var validator: Array;
protected function creationCompleteHandler(event:FlexEvent):void
{
validators = [usernameValidator, passwordValidator];
}
protected function login_clickHandler(event:MouseEvent):void
{
If (Validator.validateAll (validators) .length > 0)
return;
var params: AuthenticateUserParams = new AuthenticateUserParams();
params. Domain = domain.selectedItem;
params. Password = password.text;
params. UserName = username.text;
Dispatcher (new UserLoginRequest (params));
clearFields();
}
public function clearFields (): void
{
username. Text = ";
Password.Text = ";
domain.selectedIndex = 0;
}
[]] >
< / fx:Script >
< fx:Declarations >
< mx:Validator id = "usernameValidator" property = "text" required = "true" source = "{username}" / >
< mx:Validator id = "passwordValidator" property = "text" required = "true" source = "{password}" / >
< parsley: Configure / >
< / fx:Declarations >
< s:Form >
< s:FormItem label = "enter user name" color = "#000000" >
< s:TextInput id = "Username" = '761' x y = "357" width = "131" text = "kisn" / >
< / s:FormItem >
< s:FormItem label = "Enter password" >
< s:TextInput id = "password" x = "825" y = "142.25" width = "132" displayAsPassword = "true".
Text = "555" / >
< / s:FormItem >
< s:FormItem label = "log on" >
< s:DropDownList id = "domain" x = "825" y = "172.25" width = "132".
dataProvider = "{new collection ArrayCollection (['HO', 'mM'])}.
selectedIndex = "0" >
< / s:DropDownList >
< / s:FormItem >
< s:FormItem width = "100%" >
< s:Button id = "login" x = "115" width = "125" height = "31" label = "Login".
Click = "login_clickHandler (Event)" cornerRadius = "10" fontSize = "16" "
fontWeight = "bold" >
< / s:Button >
< / s:FormItem >
< / s:Form >
< / s:Panel >
I think I see your problem. Except if you their so-called to do otherwise, mx:Validators will validate automatically each time that the "trigger" was even sent to the target component, this source is linked to. Since you do not specify a triggerEvent validators are tuned to the default event (i.e. for a TextInput "valueCommit" If memories are good) and validate this field whenever this event occurs. In your case, I think the culprit is this call to 'clearFields() '. This method is changing the text in the fields and causing thus the validation runs again on the now empty TextInputs (and therefore invalid).
The easiest solution if you want to only be triggered manually your validation must set the property to "triggerEvent' of your validators to an empty string. Stop them from trigger automatically when the text is changed.
-
Button redirect URL always redirects with the Validation Error Messages
Hi all
I need help/clarity on not allowing a redirect button redirect the page when there are Validation Error Messages that appear on the Page. I use a form with about 10 postings. I don't want an end user to be able to continue to use / click on the redirect if one of these Validations button occurs. My button redirect URL lance a standard call to redirect javascript to pass some values of 1 shape to another shape, button calls the function. I also have a Condition on the button which does not display this button based on some users. Any help with this is certainly appreciated.OK, your always using management of javascript, can you not use a branch of the page under branches? Set the target under the button - no target - and because using a branch of page, you can set the domestic fire after calculations and validations, use a branch of the page...
-
How to use swivel to cross tabular report
Dear gurus,
I have it here is the Emp_Hist table, which is usually audit table for the Emp table.
For each record, we maintain version (there may be difference in version as for empno = 3) when it updated there.
ENo EName Sal job DOB Version
---------- ---------- ---------- ---------- ---------- ----------
1 Sanjiv 1000 committed 12/10/89 1
1 Sanjiv 1000 committed 12/10/89 2
1 committed Sanjeev 1900 12/10/89 3
Scott 2000 analyst 22/10/85 1 2
2 Scott 2000 analyst 22/10/85 2
Scott 2 3000 lead 22/10/85 3
3 Smith 4000 lead 13/11/81 1
3 Smith 5000 lead 13/11/81 2
3 Smith 5500 lead 13/11/81 4
3 Smith 8000 CTO 13/11/81 5
I want to display changes (current value and previous value)
for each column as below.
PK_Val Column_Name Previous_value Current_Value
----------- -------------------------- -------------------- --------------------
1 ENo 1 1
1 Ename Sanjiv Sanjeev
1 1000 1900 sal
1 committed post clerk
1 DATE OF BIRTH 12/10/89-12/10/89
2 ENo 2 2
2 Ename Scott Scott
2 sal 2000 3000
2 senior analyst job
2 DATE OF BIRTH 12/10/89-12/10/89
3 ENo 3 3
3 Ename Smith Smith
3 5500 8000 sal
Job 3 lead CTO
3 DATE OF BIRTH 12/10/89-12/10/89
Could someone help me growing up? Can swivel will contribute to higher.
Concerning
Sanjeev
For each employee, which values (column) to change.
ENO Column_Name Previous_value Current_Value
----------- -------------------------- -------------------- --------------------
1 ENo 1 1
1 Ename Sanjiv Sanjeev
1 1000 1900 sal
1 committed post clerk
1 DATE OF BIRTH 12/10/89-12/10/89
2 ENo 2 2
2 Ename Scott Scott
2 sal 2000 3000
2 senior analyst job
2 DATE OF BIRTH 12/10/89-12/10/89
3 ENo 3 3
3 Ename Smith Smith
3 5500 8000 sal
Job 3 lead CTO
3 DATE OF BIRTH 12/10/89-12/10/89
Maybe you are looking for
-
How can I unsubscribe from this forum?
How can I unsubscribe from this forum? Most of the forums give you the opportunity to cancel the subscription to a thread in the emails they send on the new posts.
-
HP2542 said in offline mode when I want to print Winsows 8.1
I am running Windows 8.1. My printer is HP Deskjet 2542. When I try to print, I get a message printer offline. I have a LenovoG50.
-
BIOS password reset help please
Hello I have an Elitebook 8440p .and I need to enter the bios. where can I get a password to access the bios? Thank you
-
Restore to factory settings get rid of most of the viruses and malware?
Restore to factory settings get rid of most of the viruses and malware? I read that restoring to factory settings is a way to get rid of viruses and malware, but I also read that it does not get rid of all the viruses and malware. On average, appro
-
My keyboard is all messed up and I don't know how to fix
"I own a lenovo ideapad my son reset button press on my computer, removing most of my programs, but this is not so much the problem, the problem is the following, now some of the keys on the keyboard will not print the right characters example the @