How do I remove the license attributed to my administrator account so I can assign to a member of the team?  I just need admin team, not licenses.

Similar Questions

• How do I remove the launch date for the safe in FF portable ESR 31

  How do I remove the launch date for the safe in FF portable ESR 31. Is it possible that - by pressing the SHIFT key when you launch firefox shows the option of safe mode - off and close the browser.

  See also:

  • http://Mike.kaply.com/2013/01/11/disabling-safe-mode-in-Firefox-17/

• I downloaded Firefox 5 and discovered that it disabled my McAfee SiteAdvisor of incompatibility becauce. How do I remove the Firefox 5 and reload my old Firefox 4, so I can reactivate the SiteAdvisor.

  I downloaded Firefox 5 and discovered that it disabled my McAfee SiteAdvisor as inconsistent. No compatible version of the SiteAdvisor has been found. How do I remove the Firefox-5 and reload my old Firefox 4 so I can reactivate the SiteAdvisor?

                        Thank you
  

  McAfee Site Advisor 3.3.1 expansion was the number 2 cause accidents in one of the versions beta Firefox 5.0 and Mozilla Blocklisted it. This extension is disabled in Firefox 5, Firefox 6.0beta and Firefox 7.0alpha versions. McAfee is working on a new version of re-written extension of the Site Advisor to solve their problems - ETA is mid to late July.
  
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=660111

  Thanks to the-edmeister

• Satellite L750-A218 - how easily / safely remove the MMC card

  Hello

  I just tried the MMS and inserted a MMC console.
  I have a question now. After eject devices.

  How to remove it properly. I tried pushing gently so that it would make the ticking and make out but that has not worked. I didn't force and ruin the slot. I can get out, but I have to raise the laptop.
  On the user manual. Those are the steps for removal:

  1. open the icon remove the device safely and eject media on the Windows taskbar.
  2. tap media memory and click on the left Touch Pad button.
  3. Enter the media up and out of the computer to remove it.

  I have not quite step 2. Please explain to me how easily / safely remove the MMC on this laptop.
  Also, tell me if pushing the MMC will be out or not.

  Hello

  What card insert you? MMC (MultiMediaCard)?
  Usually you will need to enter the card and pull it out of the computer s slot to remove the media but when you insert the support of memory in the wrong direction, you will not be able to remove

  > I have not quite step 2. Please explain to me how easily / safely remove the MMC on this laptop.
  In most cases the task bar contains a small icon showing that the media card is inserted...
  We must therefore stop this read/write process before removing the card...

• How to completely remove the trojan: win32/bamital for my computer, he says: it is partially removed

  How to completely remove the trojan: win32/bamital for my computer, he says: it is partially removed

  Hello
  1. where did you get the message saying that it is partially removed?
  2. what operating system is installed on your computer?
  3. what version of the operating system Windows am I running?
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can run Microsoft Safety Scanner from the link below.
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-GB/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
   
  You can also ask your question here:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_scanning

• Can I create an action to move the last page to the first?  I can only find how to manually drag the pages, and I need to make it simpler when there are a lot of pages.

  Can I create an action to move the last page to the first?  I can only find how to manually drag the pages, and I need to make it simpler when there are a lot of pages.

  Yes, you can do it using a script. This code should do the trick:

  this.movePage (this.numPages - 1, -1);

• How to check if the persistence Unit objects are persistent or not?

  How to check if the persistence Unit objects are persistent or not?
  
  I have correctly set up and deploy the object used as a persistence in Oracle coherence unit according to the guide Chapter 6 of tutorial for Oracle coherence 3.5
  Using the RunEmployeeExample script, I had good results. I see that once the cache object is updated, the database table (employees) is also updated accordingly. Here is the result:

  2009-11-05 11:09:55.043/53.467 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:09:54.867, Add
  ress=192.168.8.80:8089, MachineId=24656, Location=process:1684, Role=OracleRunEmployeeExample) joined Cluster with senior member 1
  2009-11-05 11:09:55.604/54.028 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service Management with senior memb
  er 1
  2009-11-05 11:09:56.885/55.309 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: connecting to member 2 using TcpSocket{Sta
  te=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=4084]}
  2009-11-05 11:09:57.847/56.281 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service JpaDistributedCache with se
  nior member 1
  2009-11-05 11:09:57.917/56.341 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Service JpaDistributed
  Cache: sending ServiceConfigSync containing 258 entries to Member 2
  2009-11-05 11:10:04.086/62.510 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Deferring the distribu
  tion due to 1 pending configuration updates
  [EL Info]: 2009-11-05 11:10:14.36--ServerSession(2883071)--EclipseLink, version: Eclipse Persistence Services - 1.1.1.v20090430-r4097
  [EL Info]: 2009-11-05 11:10:22.312--ServerSession(2883071)--file:/C:/JDeveloper/mywork/AppJPA/JPA/classes/-JPA login successful
  2009-11-05 11:10:24.305/82.729 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): 3> Transferring 128 ou
  t of 257 primary partitions to member 2 requesting 128
  2009-11-05 11:10:25.697/84.121 Oracle Coherence GE 3.5.2/463 <D4> (thread=DistributedCache:JpaDistributedCache, member=1): 1> Transferring 129 ou
  t of 129 partitions to a node-safe backup 1 at member 2 (under 129)
  2009-11-05 11:10:25.857/84.281 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Transferring 0KB of ba
  ckup[1] for PartitionSet{128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151,
  152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, 180,
  181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209,
  210, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238,
  239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256} to member 2
  2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: disconnected from member 2 due to a kill r
  equest
  2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 left service Management with senior member
   1
  2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 left service JpaDistributedCache with seni
  or member 1
  2009-11-05 11:10:40.708/99.132 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:10:40.708, Add
  ress=192.168.8.80:8089, MachineId=24656, Location=process:1684, Role=OracleRunEmployeeExample) left Cluster with senior member 1
  2009-11-05 11:10:40.879/99.303 Oracle Coherence GE 3.5.2/463 <Info> (thread=DistributedCache:JpaDistributedCache, member=1): Restored from backup
   128 partitions
  2009-11-05 11:10:40.879/99.303 Oracle Coherence GE 3.5.2/463 <D4> (thread=DistributedCache:JpaDistributedCache, member=1): 0, 1, 2, 3, 4, 5, 6, 7
  , 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 4
  4, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80
  , 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 11
  3, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127,
  2009-11-05 11:28:39.800/1178.224 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:28:39.635, A
  ddress=192.168.8.80:8089, MachineId=24656, Location=site:metsys.metex.com,machine:mw12,process:1752, Role=CoherenceConsole) joined Cluster with s
  enior member 1
  2009-11-05 11:28:40.231/1178.655 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service Management with senior me
  mber 1
  2009-11-05 11:28:41.633/1180.057 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: connecting to member 2 using TcpSocket{S
  tate=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=4143]}
  2009-11-05 11:30:01.658/1260.082 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service DistributedCache with sen
  ior member 2

  But I can't check whether the persistence unit is still persistent.
  
  Published by: jetq on November 5, 2009 11:49

  Re:

      Does the above result shows that the persistence work is finished successfully?
     
  

  Yes, it's nice. What is persistence. These are the characteristics of persistence.

  Junez

• BGP announcement: How do I remove the attributes "next hop" and "metrics" inherited from OSPF?

  Hello

  I use a router THAT WAN Cisco ASR1001 connected via BGP AS65075 with our ISP.

  This router is connected through OSPF with our Cisco 7206VXR/NPE-G2 firewall.

  Topology:

  ISP <- bgp="" -="">RT 1001 <- ospf="" -="">FW 7206 <->LAN

  On the WAN router, static routes are set to null0 to always announce our class C networks.

  Route IP 192.168.10.0 255.255.255.0 Null0 250

  ...

  Network guidelines are placed in our BGP configuration:

  router bgp 65075

  The log-neighbor BGP-changes

  neighbor EBGP-PEER-IPv4-peer group

  EBGP-PEER-IPv4 neighbor fall-over bfd

  neighbour 192.168.88.138 distance - as 65200

  192.168.88.138 a neighbor EBGP peers PEERS-IPv4

  192.168.88.138 ISP IPv4 neighbor description

  next password 192.168.88.138 7 unknown

  !

  ipv4 address family

  ...

  network 192.168.10.0

  ...

  a neighbor EBGP-PEER-IPv4 soft-reconfiguration inbound

  EBGP-PEER-IPv4 neighbor distribute-list prefix-v4 on

  an EBGP-PEER-IPv4 neighbor prefix-maximum 100

  neighbor EBGP-PEER-IPv4-1 filter list out

  neighbor 192.168.88.138 activate

  neighbor 192.168.88.138 filter-list 2

  output-address-family

  A part of these networs are also learned through OSPF. If these routes are present in the routing table:

  RT-01 #sh ro ip 192.168.10.0

  Routing for 192.168.10.0/24 entry

  Known via "ospf 1", distance 110, metric 20, type extern 2, metric 1 forward

  Published by bgp 65075

  Last update to 192.168.0.79 on Port - channel1.28, 7w0d there is

  Routing descriptor blocks:

  * 192.168.0.79, from 192.168.0.71, 7w0d there is, through Port - channel1.28

  See metric: 20, number of share of traffic is 1

  Because these roads are active in the rounting table. Announcing BGP based on his and attributes "next hop" and "metric" are inherited from OSPF:

  RT-01 #sh ip bgp neighbors 192.168.88.138 announced-routes

  ...

  Network Next Hop path metrics LocPrf weight

  ...

  * > 192.168.10.0 192.168.0.79 20 32768 I

  ...

  Is it possible to remove the legacy of OSPF into BGP attributes?

  How to set the "next hop" to the value 0.0.0.0 and "metric" to 0?

  Thank you

  Best regards

  Jérôme

  Hello Berthier,

  NEXT_HOP is a hill & attribute mandatory path including the eBGP value is the IP address of the BGP peer (specified in the neighbor's remote control) where the router learns the prefix. Thus, your peers (eBGP) will still see the IP 192.168.88.138 in your BGP Next Hop as updates. I agree you the output of the command ' sh ip bgp neighbors 192.168.88.138 roads announced "can be confusing, but not worried about it.

  Metric 20 is cause of path must be acquired by OSPF. Copy in default atributte MED BGP metric. So I see that you have only a peer is very important change this value because MED is not transitive, if this value is not propagated by other ACE access your provider. Anyway, if you want to change, you must:

  1. create a list of prefixes with one or more prefixes that you want to "reset" the MED value:

  list of prefixes prefix-to-reset-MED seq 5 permit 192.168.10.0/24

  list of prefixes prefix-to-reset-MED seq 10 permit X.X.X

  2. create a roadmap

  allowed to reset - MED card route 5

  match of prefix-to-reset-MED IP prefix-list

  the metric value 0

  road map provided to zero-MED allowed 10

  !

  The last road map is necessary to ensure that the rest of the prefixes are sent.

  3. apply the road map

  a neighbor EBGP-PEER-IPv4-roadmap given to zero-MED on

  Concerning

• How do I remove the license invalid CSA of VMS

  I downloaded a license file to my VMs 2.2 server, but it is showing as invalid. I would like to just go out there. Is this possible?

  Go to the \Program Files\CSCOpx\CSAMC\cfg and delete all the files lic that are invalid or duplicates and re - import. If this does not remove all the .lic files and reimport all. This will fix the problem.

  Be sure to note all messages.

• How to completely remove the add-on preferences?

  "Toolbar buttons" extension buttons are displayed incorrectly (buttons in white). Reinstall it also restores the old settings with missing icons. How can I completely reset the extension data and preferences without resetting the other settings of firefox? (I tried to manually remove the file extension too - same result).

  [firefox v33.1.1]

  If you open the topic: page config in the toolbar url and the search for the name of the old addons, you can remove entries from there.

  Also try the Firefox Menu, and then clicking Customize. From here you can drag the icons off and it can record without addons

  If this does not work, there is also a possibility of passage of the profile to another. Backup and restore Firefox profiles information

• Satellite Pro A120: How do I remove the CD/DVD drive

  I have 2 main problems and doesn't seem to completely open the case.
  Does anyone know how to remove the dvd - rom?

  But my mainproblem is swith power Ribbon (blue) has come off the motherboard. But as I can't open completely the case im with tweezers for trying to recconect.

  Does not seem to want to go.
  Is there a clip into the connector on the motherboard or is it just push in? A picture or a diagram would be helpful.

  Any help would be appreciated.

  Thank you

  One question; Why are you doing this?
  I mean why you want to open the notebook?
  Always it is that Satellite Pro A120 is not an old notebook and I presume that the guarantee is valid.
  If you remove the lid of the laptop, you will lose the warranty!

  The removal of CD/DVD is very easy.
  Usually, it is fixed with a screw located at the bottom of the unit. You have to remove first, and then he should be able to take off from the STRANGE.

• How do I remove the keyboard of a Portege R400

  Can someone give me more detailed information about how to remove the keyboard of my R400. I want to insert the SIM card, but I'm worried about damaging my new laptop.

  Thank you very much
  G. Elmo

  Hi mate,

  To add or remove a SIM card, you must perform the following steps:

  1. your machine must be OFF!
  2. Remove and unplug any cable attached and device (USB, parallel, etc.)
  3. remove the battery
  4. remove the keyboard by pulling cover upward where are the grooves on each side of the hood. You can also use a small flat blade screwdriver or your nails to pull up.
  5. remove the 2 screws that hold the keyboard down.
  6 pull the keyboard slowly and gently up, you pull it toward you.
  7. the SIM card slot is on the right side of the motherboard, pull the crack slightly on the left side to pull up. It s like the removal of a SIM of a mobile phone :)
  8 put the SIM card into the slot. The smart gold SIM card must be on top. (You should see the chip during the installation of the card)
  9. click on the slot facing downwards and push it gently to the right to lock it.
  10 install the keyboard by placing the clips under the palm rest.
  11 Don t forget the screws ;)
  12 and the keyboard cover.
  13 fact.

  PS: Thanks for reading my text, if you want to send me money, gold or champagner just ask for my address. ;)

  Good luck and good weekend

• Safari is enclosed by Mallware how do I remove the mallware

  My Safari is enclosed by Mallware, how I can remove it?

  Many thanks

  Scamware?

  1 force quit Safari.

  Force quit.

  Press command + option + esc together keys at the same time. Wait.

  When the Force Quit window appears, select Safari if not already.

  Press the button to leave the bottom of the window.   Wait.

  Safari stops.

  2. restart Safari by holding down the SHIFT key.

  This will launch Safari mode without failure.

  Adware?

  1. free use Malwarebytes Anti-Malware for Mac / AdwareMedic to remove the adware

  http://www.adwaremedic.com/index.php

  Download, install, open and run by clicking on the "Scan for Adware" button to remove the adware.

  Once this is done, exit Malwarebytes Anti-Malware.

  or

  Remove the adware manually by following the 'HowTo' from Apple.

  http://support.Apple.com/en-us/HT203987

  2 Disable Extensions and test them.

  Safari 9

  Safari > Preferences > Extensions

  Disable all extensions and test them.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

• How to completely remove the Messenger app?

  Hello.

  Anyone know how I can remove the Facebook Messenger of the Cloud application? I want to remove it completely from all my devices and then reinstall it from scratch, but it still shows as yet on the cloud.

  I'm not sure it relevant to this question, but I'm running a Mac OS X El Capitan 2009 and a 6 iPhone on iOS 9.2.1

  Any help much appreciated.

  Thank you

  The app is not physically on the cloud, it's just to show that you have downloaded before and you can download it again.

  If you remove the application of the iPad, it deletes everything associated with the application. If redownload you the app, it will always install a new copy and cool app iCloud does not store the app, so you pass never twice the same exact copy. It will be a new copy of the application each time you remove and then reinstall the application.

  In addition, you will need to remove the application from each device, and then start a new download on each device. You can remove an application by pressing your finger on the icon for a few seconds until what apps shake. Press the 'x' to delete. You can also view the sizes and remove apps from settings > General > storage and use iCloud > manage storage (under the storage section) > Messenger > remove app Note If you select storage manage under the section iCould Messenger does not appear.

• Satellite L - How do I remove the password?

  Hi, I'm looking for help.

  It's my laptop the girls, it's just more than a year. About 3 months ago it stopped working and I used to market information on the internet. In the process, they advised me to put a password when the laptop starts as well as having an administrator password.

  Which was fine for a while until recently. When the password prompt appears and enter us the password disappears as if an incorrect password has been inserted, you are then able to enter again. In this case 3 times, then the top of the Tower stops and he must start over.

  Now we must enter the password in anything up to 15 times before you can log on to the windows administrator password screen? can anyone tell how to remove this password?

  In addition, we cannot enter the start menu at the beginning, we are given the options press F2 or F12 and no work.

  I look forward to you help what can offer.

  Thank you.

  Hi shadeyjadey,

  I guess you mean the BIOS password, right?

  So the only option is in touch with an authorized service provider. Only these guy can remove the password because it of a little more difficult and complicated.

  Then contact ASP in your country, and they can help you! :)