How do I return the object horizontally

Similar Questions

• Why photoshop print return the image horizontally and how to fix it?

  Why photoshop print return the image horizontally and how to fix it?  I'm using CS5.

  I don't have CS5, but check for certain features in the box print dialog which allows to reverse or said something like the screenshot below:

  

• How can I return the path of a test step VI in LabVIEW?

  I would create a VI that will return all of the VI paths that are associated with the test steps in a TestStand sequence.  How can I return the path of the VI associated with a test step?  Here is a starting point that will return the first step of the sequence.

  

  You must convert the Module to a LabVIEWModule (use the variant to the data node), then you can use LabVIEWModule.VIPath.  If you use TestStand 2010, you can call LabVIEWModule.GetVIAbsolutePath to find the VI in the case you are calling with a project.

• How can I return the audio for my lap top.

  Original title: audio sound

  I inadvertently deleted something that gives me sound on my lap top. I think it is silverlight. How can I return the audio for my lap top. THX

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  3. when exactly do you face the question?

  I suggest to return the item and try to run the fix it:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Please provide more information to help you best.

• After this evaluation period how can I return the original windows

  After this evaluation period how can I return the original windows

  By reinstalling the Moose of operating system or factory reset (if your computer supports)

  You will need to re - install all the applications you added since as well.

• How can I customize the object of a hyperlink email

  How can I customize the object of a hyperlink email? I added a hyperlink to an image. I want to click, a new message of pop e-mail filled up with a topic already personalized.

  hyperlink would be

  topic of mailto:youremailaddress?subject=email here

• return the objects while maintaining the position on the page

  Is there a a way to return multiple objects at the same time while maintaining their position on the page without having to select each individually? For example, if I had a box of text at the top and bottom of a page, choose both and then reversed them, rather than the top text box swapping with that down they times remain in the same place but flip backwards?

  In Illustrator, you'd have the transformation of each command to do this, but in InDesign, you must use the function transform once again, which, if you're just flipping 2 objects records all the steps. But, let's say you want to return 16 objects as you describe... in place.

  Select one and choose object > transform > Flip (Horizontal or Vertical)...

  Now select the other 15 and choose object > transform again > transform again individually

• How can I return the virtual keyboard (now in the center of the screen) down?  I don't see what I'm typing so I hope it works.  Help, please

  After a recent update the keyboard appears in the center of the screen, rather than at the end. How can I return it down?

  Press and hold the keypad icon bit, then slide your finger up to 'Dock '.

• How can I return the button open the PC card to the flush position?

  I'm stupid to me, but I do not know how to return the button open PC card on the rinse Position.  When pushed once the button extends over half an inch on the side of the pc and allows access to the cardholder.  That's what the textbook says, and it works; However, I am unble to understand how the button to return to the position of outcrop and it is here extended to the half inch.  Help!

  Try pushing it, there should be a clicking noise so that you know it will hold in the spring, then insert the envelope

  Message edited by JonathanKnots on 05/26/2009 16:57

• Return the object

  I'm looking for a flip transformation tool (horizontal / vertical), is it implemented yet?

  Workaround solutions?

  Thank you

  also as a workaround, the object will "flip" If you resize it past the side that you want to flip the. As to the flip to the right, resize by dragging the handle of resizing to the left border on the right border. (and if you hold down the SHIFT key when resizing, it will keep the proportions of the image)

  HTH!

• How to check if the object is valid or not?

  I have a scenario in my stored procedure, where the functions seeks a User_Object and if found (= 1), then it executes.
  ex:
  IF TEXISTS ('LAB_IN') = 1 THEN
  FOR x IN (SELECT COLUMN_NAME, SRC_COL, SRC_TBL, COLUMN_PREFX, COLUMN_STRING_OPP, DEST_TABLE L_UTIL_SRC WHERE SRC_TBL = 'L')
  LOOP
  VCAT: = CASE WHEN ISCAT > 0 THEN ELSE REPLACE(x.DEST_TABLE, 'UTIL_', '') "END;
  vblJOB: = ";
  vblJOB: = vblJOB | "CREATE OR REPLACE PROCEDURE SP_ | x.DEST_TABLE |' AS ';
  vblJOB: = vblJOB | "PRAGMA AUTONOMOUS_TRANSACTION; ';
  vblJOB: = vblJOB | ' vblQueryName VARCHAR2 (150); ';
  ..........
  ..........
  ..........
  
  My question is, what happens if the object (LAB_IN) is not valid. Or if changes have been made to it. How can I do this function NOT run, if the object is not valid... and displays the error message without going any further...
  
  Any suggestions or comments, would apprecaite it...
  
  Thank you!

  999355 wrote:
  Hi Frank,.

  I made changes to the code. Can you please let me know if that would work. Look's like I am getting a syntax error;

  The error messages contain information designed to help solve problems. Always display the full error messages, including the line numbers and the complete code that caused them.

  CREATE OR REPLACE PROCEDURE 'PROCEDURE_NAME' (ACE)
  VARIABLE1 VARCHAR;
  VARIABLE2 VARCHAR;
  VARIABLE3 VARCHAR;
  VARIABLE4 INT;
  BEGIN
  IF TEXISTS ('LAB_IN') = 1 THEN

  What is TEXISTS? Is - this function that queries user_objects? Perhaps you need to change to get the status.

  SELECT MIN (STATUS)
  IN OBJ_STATUS
  WHERE OWNER = "
  AND OBJECT_NAME = 'LAB_IN. '
  AND OBJECT_TYPE = 'VIEW.

  You need one; After the above statement

  IF OBJ_STATUS = "VALID".
  THEN
  FOR x IN (SELECT COLUMN_NAME, SRC_COL, SRC_TBL, COLUMN_PREFX, COLUMN_STRING_OPP, DEST_TABLE TABLE_NAME WHERE SRC_TBL = 'L')
  LOOP
  VCAT: = CASE WHEN ISCAT > 0 THEN ELSE REPLACE(x.DEST_TABLE, 'UTIL_', '') "END;
  vblJOB: = ";
  vblJOB: = vblJOB | "CREATE OR REPLACE PROCEDURE SP_ | x.DEST_TABLE |' AS ';
  vblJOB: = vblJOB | "PRAGMA AUTONOMOUS_TRANSACTION; ';
  vblJOB: = vblJOB | ' vblQueryName VARCHAR2 (150); ';
  ..........
  ..........
  ..........
  EXECUTE IMMEDIATE (vblJOB);
  COMMIT;
  END LOOP;
  ON THE OTHER
  DBMS_OUTPUT. Put_line (' table LAB_IN is missing.) Please check...');
  END IF;
  END IF;
       
  IF TEXISTS ('RX_IN') = 1 THEN
  SELECT MIN (STATUS)
  IN OBJ_STATUS
  WHERE OWNER = "
  AND OBJECT_NAME = 'RX_IN. '
  AND OBJECT_TYPE = 'VIEW.

  You need one; After the above statement, too.

  IF OBJ_STATUS = "VALID".

  
  THEN
  FOR x IN (SELECT COLUMN_NAME, SRC_COL, SRC_TBL, COLUMN_PREFX, COLUMN_STRING_OPP, DEST_TABLE L_UTIL_SRC WHERE SRC_TBL = 'L')
  LOOP
  VCAT: = CASE WHEN ISCAT > 0 THEN ELSE REPLACE(x.DEST_TABLE, 'UTIL_', '') "END;
  vblJOB: = ";
  vblJOB: = vblJOB | "CREATE OR REPLACE PROCEDURE SP_ | x.DEST_TABLE |' AS ';
  vblJOB: = vblJOB | "PRAGMA AUTONOMOUS_TRANSACTION; ';
  vblJOB: = vblJOB | ' vblQueryName VARCHAR2 (150); ';
  ..........
  ..........
  ..........
  EXECUTE IMMEDIATE (vblJOB);
  COMMIT;
  END LOOP;
  ON THE OTHER
  DBMS_OUTPUT. Put_line (' table RX_IN is missing.) Please check...');
  END IF;
  END IF;
       
  IF TEXISTS ('SUPPL_RX_IN') = 1 THEN
  SELECT MIN (STATUS)
  IN OBJ_STATUS
  WHERE OWNER = "
  AND OBJECT_NAME = 'SUPPL_RX_IN. '
  AND OBJECT_TYPE = 'VIEW.

  The same problem.
  Don't make the same mistake 3 times. Don't do so many changes at once to your procedure. Decide when you need to make the same change to 3 different places, do it in only 1 place and make sure it works before making the same change elsewhere.

  IF OBJ_STATUS = "VALID".
  THEN
  FOR x IN (SELECT COLUMN_NAME, SRC_COL, SRC_TBL, COLUMN_PREFX, COLUMN_STRING_OPP, DEST_TABLE L_UTIL_SRC WHERE SRC_TBL = 'L')
  LOOP
  VCAT: = CASE WHEN ISCAT > 0 THEN ELSE REPLACE(x.DEST_TABLE, 'UTIL_', '') "END;
  vblJOB: = ";

  
  vblJOB: = vblJOB | "CREATE OR REPLACE PROCEDURE SP_ | x.DEST_TABLE |' AS ';
  vblJOB: = vblJOB | "PRAGMA AUTONOMOUS_TRANSACTION; ';
  vblJOB: = vblJOB | ' vblQueryName VARCHAR2 (150); ';
  ..........
  ..........
  ..........
  EXECUTE IMMEDIATE (vblJOB);
  COMMIT;
  END LOOP;
  ON THE OTHER
  DBMS_OUTPUT. Put_line (' table SUPPL_RX_IN is missing.) Please check...');
  END IF;
  END IF;
  END;
  /

• Function returns the object type

  Hello
  This isn't a duplicate of another thread, I posted earlier with the procedure...
  Now I try the subprogramme with the service, as required by the client., so I opened the question in another thread
  

  CREATE OR REPLACE TYPE Type_Rt IS OBJECT
      (Rt_Type      VARCHAR2(2000),
       cdtRt       VARCHAR2(2000),
       lqdtRt    VARCHAR2(2000),
       Olk              VARCHAR2(2000),
       cdtwh       VARCHAR2(2000) )
   
  CREATE OR REPLACE TYPE Rt_Type_Var IS TABLE OF Type_Rt;
   
   
   
  CREATE OR REPLACE FUNCTION FUNC_RAT (
                              Cp_Id  VARCHAR2,
                                           St_Id    VARCHAR2,
                                           cdt_Rt   VARCHAR2,
                                           liq_Rt      VARCHAR2,
                                           Olk      VARCHAR2,
                                           cdt_Wh VARCHAR2)               
  RETRUN Rt_Type_Var IS
     v_typ_rat_List   Type_Rt ;
     var1_nri varchar2(100) := 'ST';
  BEGIN
     IF ( Cp_Id = 'NTE' AND St_Id = 'Y' ) THEN   
      --select distinct ne_rt_issue into var1_nri from rt_con where ltr_ener = cdt_rt;
           
       v_typ_rat_List := new Type_Rt ('STRT',var1_nri ,liq_Rt,'Stle' ,null);    
     END IF;      
       RETURN v_typ_rat_List;
  END;
  / 

  I get the following error:, I tried it but no luck on my side

  PLS-00382: expression is of wrong type

  After you create the function, I have to call this function as

  SELECT * FROM TABLE(FUNC_RAT ('NTE','Y','AB','C','Y',NULL))

  Could you please help me with this

  The same basic problem as in your previous thread. Confusion between creating an object from a collection/table of this object.

  Here's a basic example:

  SQL> create or replace type TScalar is object(
    2          id      integer,
    3          name    varchar2(10)
    4  );
    5  /
  
  Type created.
  
  SQL>
  SQL> create or replace type TArray is table of TScalar;
    2  /
  
  Type created.
  
  SQL>
  SQL> --// creating a scalar
  SQL> select TScalar( 1, 'John' ) as OBJ from dual;
  
  OBJ(ID, NAME)
  --------------------
  TSCALAR(1, 'John')
  
  SQL>
  SQL> --// creating an array/collection
  SQL> select
    2          TArray(
    3                  TScalar( 1, 'John' ),
    4                  TScalar( 2, 'Tom' )
    5          )                               as ARRAY
    6  from       dual;
  
  ARRAY(ID, NAME)
  --------------------------------------------------
  TARRAY(TSCALAR(1, 'John'), TSCALAR(2, 'Tom'))
  
  SQL> 
  

  So in your function, you will need to place objects in the collection.

  return(
      Rt_Type_Var(                      --// instantiate the collection
             Type_Rt ('STRT',var1_nri ,liq_Rt,'Stle' ,null)  --// place an object into the collection
      )
  );
  

  And use appropriate type names and the object. Poorly chosen and non standard naming conventions just add to the confusion.

• How do not affect the two horizontal panels when resizing the browser?

  I have two horizontal panels in a canvas. When I resize the browser (IE), PanelB straddles PanelA. How can I prevent this from happening? How can I make the panels resize when the browser is resized?

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Canvas ' http://www.Adobe.com/2006/MXML "
  xmlns:controls = "org. FRB. "ATL.xxxx.UI.Controls.."
  Width = '100% '.
  Height = "100%".
  preinitialize = "PreInit () '"
  creationComplete = "init ()" >

  < mx:constraintColumns >
  < mx:ConstraintColumn id = "col1" width = "30%" / >
  < mx:ConstraintColumn id = "col2" width = "70%" / >
  < / mx:constraintColumns >
  
  < mx:constraintRows >
  < mx:ConstraintRow id = "row1" height = "25%" / >
  < mx:ConstraintRow id = "row2" height = "100%" / >
  < / mx:constraintRows >

  < mx:Panel id = "PanelA".
  Width = '100% '.
  Height = "100%".
  title = "search".
  left = "col1:0." »
  right = "col1:5."
  Top = "row1:0." »
  bottom = "row2:0." »
  Layout = "vertical" >

  < / mxPanel >

  < mx:Panel id = "PanelB".
  title = "items: {contentFoundCount.text} '"
  Width = '100% '.
  Height = "100%".
  left = "col2:5."
  right = "col2:0." ">

  
  < / mx:Panel >

  < / mx:Canvas >

  I see not the overlap, even when I resize the browser.

• How do I enumerate the objects in the temporary store?

  TEMP_IN_USE_SIZE is constantly growing in my application. How can I get information about the objects in temporary storage?

  Thank you, Vladimir. I looked your reproduction and it looks like a bug. I connected it as bug 9672034.

  Chris

• Re: How can I return the system recovery partition?

  I just used the cd to restore the system and on resetting my system to factory setting, but unfortunately, the system drive on the system recovery partition has been deleted.

  How will re - install the drive to restore system partition?

  Hello

  Do you mean the second Vista partition which contains the backup system files?

  This partition is hidden and usually after installing the OS from the Toshiba Recovery disk this partition must be re-created.

  I m 100% sure because I ve got my cell several times using the Toshiba Vista recovery DVDs and the hidden partition is created every time.

  Best regards