How do I unshare a Nathalie shared?
Hello
on 5.6.4 how to unshare (make it private) a shared view?
Thank you.
Once you have obtained the opinion shared, I think that the only way to restore is to remove (and re-create if necessary).
Try it on a test system: open the dashbpoard Panel and go to settings > definitions
Under my definitions (which should be the default choice), you will have seen, the upper part, we must be as you just created.
You can remove it and then re-create (if you wish), interesting, that I don't know that it allows you to change and it will tell you which reports that it is a part of until you delete it.
Golan
Tags: Dell Tech
Similar Questions
-
How to set up a family sharing
I just did a search for "how to set up a family sharing" and it does not give me results, only this html WYSIWYG editor. As he related to this legacy article: we are unable to find the community associated with the HT201572 article. Please select a community below: How to use several iPhone, iPad or iPod devices with one computer
I WANT to BUY MUSIC, and then I want TO PLAY ON ANOTHER DEVICE CURRENTLY successfully ON THE SAME "FAMILY SHARE"?
Is this possible? If so, why is it so hard gd? Please send me a link as the search engine has failed.
In addition, why is it so difficult to post? "You are not allowed to create or update this content.
What about this link:
-
How can I change the value shared RAM on Satellite A300 VGA?
I own a PSAGCA A300 I was woundering how I can lower the allocated shared memory?
At present it has allocated 1279 MB of shared memory ontop of my HD 512 MB I think it's really useless for my needs.How do I lower it? I checked the Bios and it could not find in there... any ideas?
It is not possible.
Everything is controlled by software and shared memory will be assigned automatically.
This means that if you run some heavy applications like games the value of shared memory is greater than performing simply applications like the browser or Word.But like I said above; everything is controlled automatically!
-
How to activate the password is shared Windows XP
Hello
Can someone tell me how to turn on password protected sharing on Windows XP. I created a network between my 2 computers using Windows XP, they work fine, I want my computer to request the user name and password every time someone tries to access from the network.
I searched for the answer for hours, but there is no answer.Please do not give me this link
http://support.Microsoft.com/kb/307874
because it has not helped at all, this is not what I wanted to do.Thank you
Microsoft does not support to protect files or folders with a password. Instead, access to the files is regulated by authenticate as a user when you connect, and once authenticated, you will have access to all the files and folders to which the user or group has permissions.
So even that work, "Simple file sharing" must be disabled. This means that you can do this with XP Home (like service machine). Simple file sharing requires all external connections to authenticate the 'Guest' user no matter what--no real authentication is therefore possible.
Assuming you have XP Pro and disable Simple file sharing, then the network authentication works something like this:
If the same user name and password of a user exists on the service machines and the Client, the authentication is automatic (it won't request user name and password - you will be simply authenticated)
Otherwise, if the same user name exists on both machines but the passwords are different, the connection is automatically rejected
Otherwise, if the guest user is enabled on the service computer, then the user is automatically authenticated as a "Guest"
Otherwise, if the guest user is not enabled on the service computer, then it will ask you a user name and password (which I think is what you want).In summary, if you still want to request a username and password when someone connects, then you must disable Simple file on your server XP Pro machine sharing, not have the same usernames on both machines and disable the account invited on the service machine (note that "turn off" the account invited in the user Panel do not "neutralizes" it). To disable the guest account, open a command prompt window (start-> Run-> "cmd") and then, in the command window, enter the command:
NET user guest / active: No.
Note that this didn't matter that will prevent to authenticate as the user invited on this machine.
Even if turn away you from KB307874, is actually the closest you can come with Windows.Hope this Helps,
JW -
How to install the db oracle11gr2 shared on two asm starts
I have two ASMDGs (ASMDG & ASMDG2 say) with two separate databases (say, orcl & orcl2). Now, I want to install a shared database (say orcl1) on both of these ASMDGs. But I use dbca to create orcl1 when the selection starts, I can't select both two starts.
Can anyone give help how do to install a database shared on two asm starts?
Thank youChoose only one initially and, a little further in the DBCA, you can set the location of the data files separately.
Here you can specify which of the two starts to use for each data file manually. You can create the ASM directories manually with asmcmd.
I hope this information helps,
Kind regards
Enric Moya
-
How to suppress the flow of shared photos?
I already disabled photostream and I have not shared any photostream but also when I discovered shared space of storage left, photo stream is in place on my device and I don't see on photos app and so I would like to know how to remove my camera?
... Also, I have not shared any photostream...
My Photo Stream and Photo Sharing are separate options. Check which ones you have disabled/enabled. Note that even if you don't share photos, you could download others also shared images.
For General cleanings of storage, the best way is to restore your device.
------------
-Restore your iDevice: https://support.apple.com/en-us/HT204184
If your backup is in iTunes, make sure that it is encrypted.
-
How Windows users see my iCloud shared photo album?
I created an album with iCloud Photo Share.
Among those invited are some hardcore with no iCloud account Windows users.
How can they see the photos? I do not have the public album if there is another way?
Thanks in advance
See these -.
http://www.windowscentral.com/how-set-and-use-icloud-photos-Windows-10
-
Tecra R850 - How can I reduce the memory shared graphics card?
Hi all
I need help with a few questions:
My system says I have 2, 66 GB RAM available for applications, services, etc. The rest (between 1.1 and 1.3 GB of RAM) is shared and reserved for the graphics card. I looked for a way to reduce it through the BIOS (how it works normally), tried an update for the bios jumps that he would add this feature. But it wasn't the case.I don't understand why Toshiba won't allow its customers to modifity this setting!
I can understand putting such a context by default, but also giving an option for advanced users to change this setting.2, 66 GB RAM are not very good and I often need more than that... 500 MB more of RAM for sys would be really nice.
And 64 bit OSs don't are currently not supported in our society.Does anyone know if a way to reduce the memory shared to 500 MB for example?
My system features:
Windows 7 Pro SP1 (32-bit)
Model: TECRA R850
SERIALNO. : 7B042670H
PartNo. : PT525E-03E00KGRThank you in advanced for your answers!
null
As far as I know shared memory works automatically and laptop user cannot control it.
There is nothing new and the same principle is on all Toshiba laptops.Sorry but there is nothing to do about it.
-
How can I add a file sharing application
I would like to add an application to the list "file sharing" applications. How do I do that?
If the application supports file sharing should appear automatically.
TT2
-
How to change automatic internet connection sharing network channel
I really need to change my internet auto channel sharing, but it is not yet an option... Can someone tell me please how to change automatically!
It is setup for internet sharing... This is a totally different configuration... You cannot use auto because your computer is now the router... but your computer does not have a scan wireless for unused channel capacity.
-
How can I locate and delete shared items?
I am in the process of updating XP Media Center Edition to Windows 7. The Easy Transfer Wizard find 53.7 concerts of the "shared items". I spent an hour or more, trying to find where these items are kept, so I can delete them. I went through all the user accounts and saved or removed everything except 7.5 GB of points. With concerts of 53.7 of shared items, total transfer items exceed the storage capacity of my external hard drive. Thank you
How to use Simple file sharing to share files in Windows XP
http://support.Microsoft.com/kb/304040How to find shared Windows folders
http://compnetworking.about.com/cs/winxpnetworking/HT/findwinshares.htmHow to identify the shared folders in Windows XP
http://www.mydigitallife.info/how-to-identify-shared-folders-in-Windows-XP/J W Stuart: http://www.pagestart.com
-
How can I fix Internet connection sharing?
I said that it's corrupted... :-(
Hi Bill SS,.
(1) what is the exact\complete error message you get?
(2) remember to make changes to the computer before the question?
Consult the following links...
How to configure Internet connection sharing in Windows XPTroubleshooting Internet connection sharing in Microsoft Windows XPSuggestions for a question on the help forums
http://support.Microsoft.com/kb/555375
Get back to us with more information on the issue so that we can send the exact resolution.
-
How can I dynamically select the shared Variable API programming data type?
I am trying to create a configuration of open connections of variable shared using the programming API. It seems to me that the cleanest way to do would be to put one "open and check" routine in a loop, then call it for each variable in the library.
The question that I am running is that I have different types of data in my library (to help a server Modbus i/o and data types 'boolean' and 'single' in my library.) How can I dynamically select the data type of the shared variable API?
See the attached snipit.
Thank you
What I ended up doing was doing a Subvi to open, read, write, and close each data type, I use the packaged in 4 polymorphic SubVIs (polymorphic Open, read, etc...)
Now all I have to do I drop in the polymorphic Subvi and it switches automatically to the appropriate data type
-
When I go to the "network and sharing" and try to disable file sharing, it automatically turns on the Windows Firewall. I want to be able and disable file sharing and disable the Windows Firewall (I use Norton 360 firewall). Any ideas? Thank you.
Hello
Check this box
How to enable file sharing enabled or disabled in Vista
http://www.Vistax64.com/tutorials/126388-file-sharing-turn-off.htmlIf no joy collate Support Norton/Symantec and Forums
Norton support
http://www.Symantec.com/support/index.jsp
http://www.Symantec.com/Norton/support/DTree.jsp?PVIDNorton forums
http://community.Norton.com/Norton/?category.ID=NISI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
How can I disable the memory shared in Windows 7?
I have a PC HP brand new with 6 GB of RAM, and I just installed a 2 GB Nvidia graphics card. When I checked the graphic properties is what I see...
MB 4095 total available graphics memory
Dedicated video memory 2048 MB
System video memory 0 MB
Shared system memory 2047 MB
Total available graphics memory should be 2 GB 4 GB not
The dedicated video memory is correct.
Shared system memory must be zero, but it's not.
When I installed the graphics card and turned on the pc, it automatically installed card and its drivers.
I read somewhere online that a few new pc will automatically disable the onboard graphics during the installation of a card that I checked, and Yes, it's now disalbled. But I still see this shared in the properties of the graphics system memory. Why is this and how can I solve this problem?
Tom
At least theres an option in the bios, re graphics memory and it may not be, what you see is what you get.
Win7 manages memory, including memory graghics
Maybe you are looking for
-
A sequence controlled by an input button
Hi guys. I want to create a sequence that is commanded by an entry for example a button 'NEXT' button which will begin a set of instructions assigned to step 2 of a sequential structure. Something as seen in a software installation. Can someone point
-
Hi guys, I have this laptop equipped with windows vista 64 bit and I want to downgrade to Windows XP, but I need I find a way to put xp on it... I need sata drivers, It is an AMD machine, the ultra processor AMD Turion X 2... I have the nlite I don't
-
KB2833940 and KB2844285 keep the installation on Windows XP Home SP3 every time logout
Whenever I logout, Windows says I have 2 updates (KB2833940 and 2844285 KB to install. I looked at the Windows Update log, and these were installed at least 8 times.
-
sx700hs display will Dim when the camera in position portrait - intermittent
Sometimes the photos taken during the display is dark when sx700hs placed camera from landscape to portrait position the screen darkens and becomes unusable in the Sun, are very good. It is intermittent and barely had place indoors or in darker condi
-
Continues printing additional copies not necessary that a single copy.
Photosmart C7280 with WIN7. When wishing to print a copy of a listing of the printer continues to print additional copies after the first copy despite having been fixed for only one copy. Everyone knows this product or ideas. Have uninstalled and rei