Continues printing additional copies not necessary that a single copy.
Photosmart C7280 with WIN7. When wishing to print a copy of a listing of the printer continues to print additional copies after the first copy despite having been fixed for only one copy. Everyone knows this product or ideas. Have uninstalled and reinstalled the printer and the software but no change.
Hi Shane,
I did as you suggested and the results were the same.
I uninstalled the printer and reinstalled.
Everything is OK now.
Thanks a lot for your help.
Kind regards
Mike
Tags: HP Printers
Similar Questions
-
Printer spooler does not work for a single user on the network printer
original title: very different printer problem
I have a HP deskjet printer shared from a PC on the network.
I was informed of a single person could not access error poped by saying "printer spooler does not work.
I went to the services and made sure it was infact running and rebooted to be sure also restarted the RPC services as it is addictive
Still, the user cannot print to the printer. I took the computer that has been seen issues and hung where fixed my PC and I am able to connect and print!If I move my computer witch would allow me to print before there where his computer is my computer prompt same error
My idea is - what some are how a network issue, but the user can still access drives network, internet and other printers on the network
Just not this printer
The computer on the share is is a windows xp sp2 workstationThe computer with the issue is any system I plug its cable Ethernet (XP anyway) I have not tried with a windows machine 7.
My hypothesis is a bad Ethernet cable? I'm quite lost with this question at this stage.
My next step is to hang the printer until a print area and assign an IP address and finish with the share.
(Still not sure if it would help or not)
Any advice is welcome thanks
It turned out to be a bad switch. I don't understand why it did not work. All the computers had no problems other than the present even that if I swapped the ports it has made a difference.
Hung new switch and all computers works fine now.
-
6700 premium e - All-in - one on the desktop MAC osx 10.9.5. When you print a doc he prints a copy but does not close the print job when completed. I then delete the print job from the hp print window. If I put the mac to sleep it then prints another copy. Does not erase the impression that when finished.
Hello @bobpatton and welcome to the forums
I read on the problem that you are having with stuck in the print queue print jobs and possibly print again. I would like to offer my suggestions that might help!
1. update the Firmware on the printer, if necessary: get the latest Firmware and updates
2. try these steps, in the order if the problem persists:
- Mac OS X: how to reset the printing system
- Repair disk permissions
- Restart the Mac.
- Add the printer: HP Officejet 6700 e-All-in-One Printer full feature software and driver - OS X 10.9 Mavericks series
I hope that does the trick, let me know how it goes!
-
Set up a wireless printer, but do not think that it is password protected
Hello
I recently bought the wireless HP Deskjet 3520 printer.
I set up the fine and was able to get my laptop wireless without having to use the USB cord. I can print wireless from laptop, iPhone, etc.
I have a secure WiFi network. During the wireless set up, he never asked me to assign a password to the printer, but when I search networks I see my secure network (which is protected) and the printer that doesn't look like not to protect (it says network in parenthesis).
My questions:
(1) can anyone with a wireless signal, see my printer and send items to him, or is it only the people who have used the password to get on my wireless network?
(2) if the printer is open to the public, how can I go about securing it with a password? I'd rather have a smartphone or tablet should put a password in that to have some edge com be able to print to my printer.
Any help is appreciated, thanks!
Yes, it is possible that someone in the range of your printer to connect to the printer and send a job if you don't fix your printer or your router with a password. It depends on your neighborhood, I guess.
In your printing wireless configuration, direct wireless is disabled because you need not currently, and impression of your network is secure from intruders outside with the password of your router.
When you enable direct wireless with security, you will be guaranteed of intruders outside with the password of your printer. If you have enabled direct wireless without security, the printer will be open for prints unsolicited since there is no password.
Best regards.
Please, click on the White Star of congratulations in the post helped you. If I solved it your problem, click on accept as a Solution.
-
HP 8600 prints multiple Copies
For the last month or so, the printer print additional copies even if 1 copy has been chosen. The small red 1 appears in the icon does not disappear when the task is completed. Lately, every thing is printed 4 times. Thank you, Richard
Ashley: reset did the trick. Thanks for your help.
-
Print spooler does not. Unable to use printer
Cannot print. Cannot add a printer. Can't download new drivers. C:\WINDOWS\SYSTEM32\SPOOLSV. EXE is a program that does not work.
Quote from: http://snipurl.com/1mdayq [www_eventid_net]
From a newsgroup post: "it seems that the print spooler does not and that it was impossible (or not configured to) restart itself.» When the print spooler does not work, printers will be not visible in the Printers folder, and you will not be able to add a new printer. A number of things could cause the print spooler to fail. It's corrupt print jobs, incompatible or problematic printer drivers or port monitors, corrupted file or disc and even other applications or processes interfering with the spooler in memory. If you try to manually restart the print spooler and it fails immediately, he may be trying to process a print job corrupted after the start. It is a common cause for the print spooler failures that occur immediately. If the print spooler starts and printing features returns for a while before a failure once again, then a monitor driver or the port is probably the cause of the problem.
To remove print spooling jobs that could cause this problem, simply remove (or remove) the files with the extension ".spl" or ".shd' of the location of the coil when the print spooler is stopped. This place is typically "c:\
\system32\spool\printers" (it might have been edited manually). Once the existing spool files have been deleted, try to restart the print spooler again to see if it works normally. If there is no (.shd or .spl files) spooling print jobs, or remove the old spooling print jobs does not change the behavior, a port monitor or driver may be to blame. " M260142 provides information more detailed which will be useful in troubleshooting. Hope this helps, Gerry Cornell
-
Installation of the printer. error: "printer spooler does not.
Original title: printer Installation
Windows XP SP3 home edition:
Software printer installation error message, "printer spooler does not" no printer is installed or deposited.
This suggestion can help.
Quote from: http://snipurl.com/1mdayq [www_eventid_net]
From a newsgroup post: "it seems that the print spooler does not and that it was impossible (or not configured to) restart itself.» When the print spooler does not work, printers will be not visible in the Printers folder, and you will not be able to add a new printer. A number of things could cause the print spooler to fail. It's corrupt print jobs, incompatible or problematic printer drivers or port monitors, corrupted file or disc and even other applications or processes interfering with the spooler in memory. If you try to manually restart the print spooler and it fails immediately, he may be trying to process a print job corrupted after the start. It is a common cause for the print spooler failures that occur immediately. If the print spooler starts and printing features returns for a while before a failure once again, then a monitor driver or the port is probably the cause of the problem.
To remove print spooling jobs that could cause this problem, simply remove (or remove) the files with the extension ".spl" or ".shd' of the location of the coil when the print spooler is stopped. This place is typically "c:\
\system32\spool\printers" (it might have been edited manually). Once the existing spool files have been deleted, try to restart the print spooler again to see if it works normally. If there is no (.shd or .spl files) spooling print jobs, or remove the old spooling print jobs does not change the behavior, a port monitor or driver may be to blame. " M260142 provides information more detailed which will be useful in troubleshooting. Hope this helps, Gerry Cornell
-
Script to print 3 copies does not
In my workplace, it must print Illustrator documents a lot of on a daily basis. Some documents are required to print 3 times, only one copy for our company, a copy to the delivery address and a copy to the billing address. Whenever 3 copies are necessary, I have to open the print dialog box, enter "3" in the field number copies and click on print. It would be great if I could have a script that would immediately print 3 copies. I could even run it through action that I could assign a keyboard shortcut for. I came up with the following script:
var doc = documents [0];
printOptions var = new PrintOptions();
printOptions.copies = 3;
doc. Print (printOptions);
Unfortunately, when I run this script, only 1 copy of the active document will print a no 3 copies as expected. I can't understand where is the problem. What I am doing wrong? Any help would be appreciated.
Hi @sergio - like,.
Try this example:
var aDoc = app.documents[0]; var printOpts = new PrintOptions(); var jobOpts = new PrintJobOptions(); jobOpts.copies = 3; printOpts.jobOptions = jobOpts; aDoc.print(printOpts);
A note:
Please, never use the name (of a method or property) to a variable. This can be quite confusing.
Have fun
-
LaserJet 1160: Laserjet 1160 will not print multiple copies in Windows 10
Before the 10th of Windows, I was able to print several copies without problem. Now with Windows 10 everything I print is 1 copy no matter what I do to different environments. Now the Mopier mode is grayed out as well as various other positions in the printer properties dialog box. Am I missing something simple?
>> ... I have administrative credentials. I can see what I have to do in the printer properties, but cannot perform the appropriate function because nearly 90% of the functions are "grayed out"...
I have no idea why this should be the case.
Seems more like a permissions problem Windows, rather than a printer or a printer driver problem.
... and you confirm that the ' grayed' value for the Mopier Mode is currently set on " Enabled"?
Check what your effective permissions ; you need 'manage this printer"access; This example shows my user (not administrator) does not have this access (so all 'device settings' values are gray when seen as logged-in while this user.
-
My HP Laserjet 1200 printer will not print several copies.
Printer was fine for several months after installing Windows 7/64, but now will not print multiple copies.
Install the latest drivers from HP does not work.Sorry, none of these methods worked, but I found a "work around" which, although unsatisfactory, works.
The only way I can change the "exemplary amount printed ' is to go of the program print menu and instead to use the box of"Copies", use" Properties/Advanced/paper output/copy Count"and change cela number of copies wanted, then run the print job, but don't forget to come back to this menu and change it to '1', which will continue to use the new set of amount." This seems to be a problem with the printer driver. -
I try to install the Kodak ESP C310 printer, but it is said that a firewall is not blocking the installation. Can you help me? I use windows XP. I tried port 5353 and this is what allows to Hello.
You can check this article, but it's about Firefox itself do not have access.
Could you give the exact wording and punctuation of the message and try Googling yourself - when google you do not without importance and punctuation, words of group who are always together as original in quotation marks or hyphens message that google will look for these words together in that order.
-
Using OSX El captain on a desktop iMac. iPhoto 9.6.1
I tried to buy my book - this box appears - TEXT by DEFAULT - your book seems to have default text that has not been modified. Printed books will not include this text. Does this mean that all my text will not print?
I've been twice now and change the text of Bradley Hand to the Blackboard to Helvetica Neue - which seemed to be the default. Message remains displayed. I don't know what else to do. This is my third book over the years, but the first with this problem. Can someone advise please?
Thank you Davina
It is not a problem of fonts. It is the problem of the sample text entered by the models.
The error message means that there is a text field in your book which is still on show at the text included by the model, and you will need to replace this text with your text. This textfield might be hidden behind a picture.
If you create a preview of the book, such default text is omitted. Have you compared the preview of what you see in iPhoto? Text that shows in iPhoto, but not in the preview will be such default text.
For example, the section 'Topic of this book' on the flap back in some themes is a default text that should be replaced by your own legend:
-
What impression of recipes, photo prints, and the name, but the recipe does not print. I heard do that before, but not of Noah
Hello
OEM for the printer manufacturer is responsible for the proper functioning of the printer
and their drivers. Check with the printer manufacturer's support, their online
documentation and drivers and ask in their forums.Good luck, you need to update or reinstall the latest driver.
================================================
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems (Vista)
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Solve printer problems (Vista)
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsSolve printer problems (Windows 7)
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Open the printer (Windows 7) Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterDiagnose and automatically fix problems printing and printer (XP, Vista, Windows 7 &)
https://support.Microsoft.com/en-us/mats/printing_problems?WA=wsignin1.0Find the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers-------------------------------------------------------------------
Windows 8/8.1 - Fix printer problems
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Windows 8/8.1 - How to solve printing problems in Windows
http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problemsWindows 8/8.1 - install a printer
http://Windows.Microsoft.com/en-us/Windows-8/install-a-printerWindows 8/8.1 - set or change your default print
http://Windows.Microsoft.com/en-us/Windows-8/set-change-your-default-printerWindows 8/8.1 - device drivers - print & drivers
http://Windows.Microsoft.com/en-us/Windows/devices-drivers-help#hardware-drivers-help=Windows-8&V1H=win8tab3-------------------------------------------------------------------
Windows 10 - Fix printer problems<- printer="">->
http://Windows.Microsoft.com/en-us/Windows-10/fix-printer-problemsSupported Windows 10
http://Windows.Microsoft.com/en-us/Windows-10/supportI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
Office Live add-in 1.5 update not necessary, but continually trying to update
I have problems with the sequence of Microsoft Office Live Add-in 1.5 update.
I use a 64 bit version of Windows 7. I already had the updated Microsoft Windows service to start (to delay) at startup. I changed it to start immediately at startup now.
I checked to see that the program Microsoft Office Live is in the list programs and features. I checked in MS Word 2007 (I have Office Enterprise 2007) and save to Office Live and open from Office Live are both present in the menu "file". These data suggest that the program works correctly.
My problem is the following: install the Windows Update detects the Microsoft Office Live Add-in 1.5 is an "important" update I accept the terms of the license, and when the update will download and installation and the Manager gives me a Green Shield saying 'updates have been installed correctly. Under this message, the details of the particular update say '' not necessary ''. A few seconds later, the Windows Update Manager detects that an update is needed and is going through exactly the same process. I can do this 20 times in a row and he will do exactly the same thing.
I would like to install the new update, or find the source of the problem that leads this snap to update, but leads to an empty sequence. What is a registry problem? Y at - it a bug related to this Add-in particular?
Could be a viral problem? I ran a OneCare security sweep that brought some questions of registry, but no virus problems, but eventually these problems solved and a 2nd scan after reboot gave no error.
I ran Malware Bytes, Microsoft Security Essentials and an AVG scan (after you have uninstalled the MOUSE of the computer... I don't keep these 2 on the computer at the same time in the event of a conflict would be.) Each of these tests came back negative.
I run the sequence of update via a wireless connection is firewalled by a customer of Cisco NAC, which requires the MSE will be installed on the computer. I take part the powers appropriate to the connection and can surf the net, download updates to 3rd party software and install other updates to Windows, such as the definitions of MSE updates.
Please thank you in advance for your help and advice.
Microsoft Office Live Add-in 1.5 is part of Windows Live Essentials.
You will find appropriate assistance by posting in this forum: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I continue to receive emails with images that do not appear?
Hello
I continue to receive emails with images that do not display, simply to show a Red Cross in the top left box from where the image should appear. I can download that will automatically open these emails?
At soon AL
Since it is a XP forum... I'm guessing that you are running Outlook Express?
The following steps may be worth a try...
Open Outlook Express and go to...
Tools / Options / Security tab.
Clear (clear) the box "block images and other external content in HTML e-mail" / apply / OK
Also on the reading tab... Make sure that "Read all messages in plain text" is not checked.
Maybe you are looking for
-
Recently, I added two accounts in Thunderbird and everything seemed to go well. Today I used one of the new accounts and wanted to switch to my old account Edurostream. But he was not found. Are there new accounts and another former account. If I go
-
Kernel Panic help - Macbook stopping constantly
I need help to understand the cause of the panic of the nucleus of my macbook. The report is detailed below. Thank you. Panic report *. panic (cpu 0 0xffffff801f1dcb62 appellant): "m_free: free an already freed buf.c:3414 mbuf"@/Library/Caches/com.ap
-
Equium L20 - no driver for USB and wireless adapter
I have instaled new Windows XP and that you do not have drivers for my Wireless Network Adapter Atheros AR5005G and my USB 2.0 if someone could help me from where I can download them
-
How to install "FM100 YUAN" on the Qosmio G50
I recently bought a new Toshiba Qosmio G50 laptop. When you first start up Windows keeps giving me a message saying "Windows needs to install driver software for your YUAN FM100".Google suggests YUAN is the company that makes the TV Tuner software -
-
My hotmail account still doesn't let me. Error message "too many password attempts".
my hotmail account b * address email is removed from the privacy * STILL doesn't let me in - attempts of TOO MANY PAST say please UNLOCK my account so I can use the new PASSWORD - he's been blocked for MONTHS! I have already received the check and al