How do I WindowsUpdate.diagcab on my Vista system?

Similar Questions

• How can I fix "diagcab" file Ext. my register 0 Error 80070002 x? I can't update Vista.

  How can I fix "diagcab" file Ext. my register 0 Error 80070002 x?  I can't update Vista.  It seems I have to redo a diagnostic firm or something.

  Thanks, Greg

  Run a full scan of CHKDSK and SFC...

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  CHKDSK C: /R

  and press the Enter key.

  We'll tell you that the disc is locked,

  and the CHKDSK runs the next time he started - press Y and restart.

  The CHKDSK command will take a few hours depending on the size of the disk, so be patient!

  Once executed, the command CHKDSK Windows should start normally (possibly after a second auto).

  Then, run the SFC.

  SFC - SFC System - Instructions

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  SFC/SCANNOW

  and press the Enter key

  Wait for that analysis at the end - make a note of any error messages - and then restart.

  Copy the CBS.log file created on your desktop (you can not manipulate directly) can compress the copy and transfer it to your SkyDrive (http://skydrive.live.com ) and post a link to it so that I can take a look.

  Post a new MGADiag report with details of any error messages encountered.

• How to get a free upgrade to Vista?

  I can't find the answer to a simple question of how to get my free upgrade to Vista and what I need to do and where I need to send the information. I bought my laptop in November and the right am to the free update.

  Toshiba makes it deliberately hard to find while they can make money off of not providing the info, so people give up? I'm going nuts trying to find the info.

  Thank you

  Good luck! You have more chance get Vista drivers Toshiba as a free update. Basically, they announce the offer available only in the United States, in Europe, you will pay a company called Moduslink.

  https://upgradeweb.ModusLink.com/Vista/

  [Edited by: admin on February 12, 2007 06:37]

• How to remap keyboard in Halo 2 Vista.

  How to remap keyboard in Halo 2 Vista. It seems that it is impossible to do with success and it also seems that no one has the answer, I tried other forums, specifically Halo 2 game forum and everything he says is a fix is being developed.

  According to the docs you're supposed to can assign any key to any function, but if you try to configure; tell E to jump, you receive an error message saying that the key is already assigned, and when you try to delete the key it will erase not as such, seems to be linked to the system somehow and cannot be deleted or changed. Paul

  Hi Paul,.

  Thanks for posting your question.

  You can try to reset the default keyboard settings. Then, try to assign a key that is not assigned to a function and check if it works.

  You can also contact Halo 2 forums:

  http://www.halo2boards.com/

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  They are only updated office or all updates?

  For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

  then manually download and install the same.

  If all updates, perhaps consider the following general tips-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• How to fix 8024200d error code in vista ultimate sp1

  How to fix 8024200d error code in vista ultimate sp1

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates:
  http://support.Microsoft.com/kb/836941

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• "windowsupdate.diagcab" won't work; extension not recognized by windows.

  The message update failed. It is error code 800F02B. Try to update to 'repair' Windows & get this download: windowsupdate.diagcab. Try to run & Windows says that it does not recognize the extension type. I'm not tech & it's all the details I can offer. Can anyone give a simple explanation?

  Shift + right click on the file and choose copy in the path.

  Press Windows key + r Type

  MSDT /cab

  so it will look something like

  MSDT /cab 'c:\users\david candy\desktop\windowsupdate.diagcab '.

• How can I restore my laptop Windows Vista to allow me to move my photos...

  My neighbour who took the week last to mess with my Windows Vista laptop and did a disc defrag with a bunch of other things that I don't have any

  idea of what it does? She stole the handle when I asked politely to restore my pc, so there is no way of knowing me now what she did :(  Thank God, thanks to your site I was able to restore my icons and can now see my photos instead of empty folders! My question is now,

  When I download pictures, a window opens which used to give me an option (Edit) move my photos that I download the folder of my choice. I don't have this option on this window. All it shows is "Organize", "Views", "Slideshow" and "Burn". Any chance to get this window with the option to move my photos into different folders? Any help would be greatly appreciated...

  Hello

  See if that helps you.

  Do a system restore, if necessary using the safe, before your neighbor has changed anything.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  See you soon.

• Emails with attachment downloading with a symbol of firefox. How can I change to display a PDF instead? I use windows mail on a Vista system.

  Emails with attachment downloading with a symbol of firefox. How can I change to display a PDF instead? I use windows mail on a Vista system.

  Shrinivas Kulkarni

  Right click on the downloaded file, choose "Open with" and choose the program proper.  She'll use the icon of the program you select.

• How to delete the onrecovery drive on vista

  My recovery disk has small footprint. How to remove the files that I don't need this disk recovery. Or otherwise put the files on a cd. If I do that it nettoieriez the recovery disk?

  You have the Service Pack installed.

  Support without the Service Pack is complete:

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  ____________________________________

  If this is not the case, the highest there is several reasons are not updates, the corruption of the file system to the Malware infestations:

  And error messages and error codes are required to correctly answer these problems:

  Corrections General, as long as you do not say what is happening when you try to update:

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

  If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  _________________________________

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  See you soon.

• How do I re - install my window (vista Home premium 64-bit)

  When I bought my laptop, it had an original window but my hard office was damaged and I had to change, change the computer store but they put non-original window as they said my recovery CD THAT is also damaged, I need to download my original window I have the serial number

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How to change computer name in windows vista edition Home premium?

  How to change computer name in windows vista edition Home premium?

  Hi LorenWorm,

  You can see the following article for more information on changing the name of the computer:

   

  Change the name of your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-computer-name

  Let us know if this information useful.

• How and if I can get the Vista OEM disc.

  How and if I can get the vista OEM disc. Install win 8 did not know that it would take on my vista os that Microsoft wants everyone to high grade don't like win 7 and win 8 is not working properly I want to reinstall vista. Laptop has been used without disk key code.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How to remove the watermark from desktop vista boot

  How to remove the watermark of ' Wndows Vista Starter from the desktop? I changed the same wallpaper theme and also reviewed the "Bcdedit" cmd.exe... "but in vain.

  Unfortunately it is one of the many limitations of vista boot,

• How can I reinstall Solitaire in Windows Vista?

  I deleted my computer solitaire awhile back. Now, I want to come back. How can I download or reinstall of Vista Home Premium 32 - bit OS Solitaire?

  I just tried the following method: Control Panel, programs, turn Windows features on / off (disabled Solitaire and then selected solitaire), restarted.  My program folder files poster now a solitaire.exe file, but it is not run/open.
  Suggestions?

  Hello

  You can follow these steps below to activate the Windows feature set and check if it works.

  (a) click Start

  (b)    click on Control Panel

  (c) click on programs

  (d) under programs and features, select Windows features on or off

  (e) check the box games

  (f) press OK

  For reference:

  http://social.technet.Microsoft.com/forums/en/itprovistasetup/thread/6fcfb899-3dc4-43A3-9549-a77090a10753