How to delete the onrecovery drive on vista

My recovery disk has small footprint. How to remove the files that I don't need this disk recovery. Or otherwise put the files on a cd. If I do that it nettoieriez the recovery disk?

You have the Service Pack installed.

Support without the Service Pack is complete:

Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

It will also tell you which SP you have installed.

Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

http://support.Microsoft.com/kb/947366

____________________________________

If this is not the case, the highest there is several reasons are not updates, the corruption of the file system to the Malware infestations:

And error messages and error codes are required to correctly answer these problems:

Corrections General, as long as you do not say what is happening when you try to update:

It would be a good idea to run the System File Checker tool to see if you have corrupted files

"How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

http://support.Microsoft.com/kb/929833

Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
Type the following command and press ENTER:
sfc/scannow

The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

"How to perform a repair for Vista Installation"

http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

_________________________________

Search for malware, if necessary using the safe mode with networking.

http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

Windows Vista

Using the F8 method:

Restart your computer.
When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
Select the Safe Mode with networking with the arrow keys.
Then press enter on your keyboard to start mode without failure of Vista.
To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
Do whatever tasks you need and when you are done, reboot to return to normal mode.

Once in Safe Mode with network, download and run RKill.

RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

http://www.bleepingcomputer.com/download/rkill/

Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

http://www.Malwarebytes.org/products/malwarebytes_free

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

And also scan with the free version of SUPERAntiSpyware

http://www.SUPERAntiSpyware.com/download.html

SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

THS is a very good program to scan your system to remove adware, etc.:

http://www.bleepingcomputer.com/download/adwcleaner/

AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer. Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

And just to be sure, nothing is lurking in the background:

'TDSSKiller Rootkit Removal Utility download for free'

http://USA.Kaspersky.com/downloads/TDSSKiller

See you soon.

Tags: Windows

Similar Questions

How to remove the printer driver under windows Vista software

How to remove the printer driver under windows Vista

Hello

Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

--------------

If you have an error spooler or service use these methods to make them disappear including having to re - install
the same printer if you intend to remove it.

Check chan seen message here - one of the highest.

fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

===================================

If the above didn't help:

Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).

Check Mr. Fixits here and if you use the other methods go back and try again later.

Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problems

Solve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

------------------------------------------------------
Logon as administrator

Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

You can copy and paste each line except those brackets and press ENTER after each.

net stop Spooler

(echo suppression of all print jobs)<-- you="" should="" see="" this="">

ping localhost n 4 > zero

del/q %SystemRoot%\system32\spool\printers\*.*

net start Spooler

(sound Done!)<-- you="" should="" see="" this="">

ping localhost n 4 > zero

Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

If you use Control Panel - Classic - printers

Try after unplugging your printer if necessary.
-------------------------------------------------------------

Also check the spooler print and its dependencies and addictions Service.

Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htm

How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

------------------------------------------------------------

Check this thread if necessary - to stop and erase the spooler

http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

and here
http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

CheckDisk (chkdsk) runs at startup.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Qosmio X 500-165 - how to extend the C drive?

Just bought the Qosmio X 500-165. Does anyone know how to extend the C drive, I get a sign that it is almost full, despite installing all my programs on the partitioned disks that I created? I need to uninstall the software installed by toshiba?

Any suggestions gratefully received. Thank you

Hey Buddy,

The 500-165 X is equipped with 64 GB SSD and HDD of 750 GB. I don t know the exact partition structure but I assume that Windows is installed on the SSD which is the C drive and HARD drive is your second drive D.

I recommend to move all files such as photos, videos, music, drive D to improve disk space on c. usually 64 GB SSD should be sufficient for all applications because Windows 7 needs only 20 GB.

Also, try to reduce the system restore points and delete temporary folders. CCleaner can also help you to clean your system. :)

Satellite P10 - how to change the HARD drive?

Hello

I want to change my Satellite P10 for a bigger HARD drive.
But I Don t know how to remove the DvD drive.

On this laptop, I mean that the HARD drive is under the DvD drive.

Please help me, if you know how to change the HARD drive.

Welcome them

Mister_X

Hi Frank,.

I'm not too sure about the P10, but on my A30 the hadr drive is under the DVD-ROM. It is secured in place by a single screw (accessible from under the laptop), and when it is deleted the DVD-ROM slides just to place revealing the hard drive.

The hard drive is fixed with 4 screws (2 on each side)

HTH

Satellite A500 PSAM3A - how to get the HARD market under Vista 64-bit disk Protection System

Hello

I would like to know how to get the HARD drive Protection system up and running under Vista Home Premium 64 bit operating system. I downloaded the program 64 bit of Toshiba for this program and install it I tried but doesn't seem to work. I have uninstalled and try to install the program, but still does not work.

Unable to find the problem, why it won't work. If anyone knows how to solve this problem it would be a great
help for me. If anyone knows how to solve this problem please answer me as soon as possible.

Thank you for your time.

Kind regards
Nigel.

Hello!

What you downloaded exactly on the Toshiba site?

As written Akuma you must install first added value Package you will find also on the Toshiba site. Check this box!

An interesting thing: it does not work if you are using the preinstalled operating system? It should have everything installed for your laptop.

Good bye

How to clear the hard drive on my old iMac of 2008?

I have a 2008 iMac I want to recycle. How to clear the hard drive?

(What is PPC?)

PPC stands for Power PC. Is the name used to refer to the old Macs that uses a Motorola processor instead of Intel chips used today. To clear your old Mac follow the advice in this document from Apple... What to do before you sell or give away your Mac - Apple Support

Office jet pro 8500 a: elimination of printer, was this encrypted model? How to destroy the hard drive?

This model encrypted?

If this is not the case, how to destroy the hard drive? Where is the hard drive?

Hi @Diane47,

Thanks for joining the Forums of HP Support with your request to printer.

I understand that you have a HP Officejet Pro 8500 has e-all-in-one printer you plan to elimination and you wonder if the hard disk is encrypted and how to destroy the hard drive. I would like to help with that.

HP Officejet Pro 8500 has e-all-in-one printer don't have a hard drive. It contains a very small amout of memory, so it can keep in memory the printer and fax settings.

You can clear the memory by restyoring the printer back to the default values.

1. on the printer Panel, select Setup.

2. from the Configuration menu, select Tools.

3. on the Tools menu, select Restore Factory Defaults.

HP offers to recycle their products for you. If you want to know more about it, please click here.

Please let me know if that solves the problem, or if you need assistance.

Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

Thank you!

Satellite L655-1FO - how to install the audio driver?

How to install the audio driver on my l655 1fo? I download the driver of toshiba, but it cannot start. Can someone help me how to install it on Windows XP. Thank you

Hey,.

Before starting with the installation of the driver it is important that you install Service Pack 3 for Windows XP, because it contains important updates for cards high definition sound. Otherwise, you are not able to install audio driver.

Download & install SP3 and then you can start with the driver installation :)

Is it safe to delete the zip driver after driver udpate?

I've recently updated some drivers on my computer and I would like to know if it is safe to delete these zip files once the drivers have actually been installed. There are also some that are just files in the same folder of update that are not compressed.

Post edited by: jurky10

Hello

> Ihave recently updated some drivers on my computer and I would like to know if it is safe to delete these zip files once the drivers have actually been installed

Of course, mate :) You can delete the zip driver of your computers. It is a completely safe procedure

How to replace the DVD drive on a series of Satellite?

Could someone give me instructions how to replace the DVD drive?
I unscrewed a few screws in back and two under keyboard and I still can't get out.
Any suggestions?

Thank you
Select this option.

I found it!

It's the single screw! It is under the flap of the memory.

Satellite A30 - how to remove the hard drive

Hi, new here...

Can someone tell me how to remove the hard drive in my Tosh A30...

Thank you
captainp

Hi Tim,.

The hard drive on your SA30 is in the optical drive, but slide the optical drive out of its housing (undo the F5 marked screws on the bottom of the laptop).

The hard drive will be visible fixed with four Phillips head screws that need to be removed (two on each side of the hard drive. With the removed screws, gently slide the hard drive toward the front of the laptop to disconnect its connector and carefully pull it out of its Bay.

HTH

Satellite L10-209 - how to install the display driver for Windows 7?

I formatted my * Satellite L10-209 * and * Windows 7 *. All the drivers installed fine but the * video card *: xD

How to install the display driver (graphics card)?
Tools & Utilities CD does not work with Win7,

Hello

I m wondering that you have installed Windows 7 on this good old classic. In my opinion Windows XP would be the best choice, but ok, you can do what you want ;)

Anyway, AFAIK your laptop is equipped with an Intel graphics card then I recommend to download the driver form Intel directly because the Web from Toshiba site displays only the Windows XP display drivers.
http://www.Intel.com

Check this box!

How to delete the files from my HP ePrint app after download / print?

Can someone tell me how to delete the files from my HP ePrint app after that I downloaded and printed. Thank you

jmsandkds,

I apologize for the confusion. Options you speak of "photos, web and file" are located on the phone somewhere, lets say you click files. When you click on files, it will search the phone for available files that are able to print the ePrint app. To the extent where they are on the phone, you will need to search for them via the search screen, connection to the computer, or some files are program specific and only available in this program to be read, edited, or deleted.

I hope this helps.

Pavilion ze5730us laptop: how to remove the hard drive of the computer laptop Pavilion ze5730us

Can anyone tell please how to remove the hard drive of the computer laptop Pavilion ze5730us? I know its under the keyboard somehow, but I don't know how or where that open. I could not find this model on YouTube either.

Thanks in advance for your help.

D.

Hello:

The only manual that I could find is one that covers the ze5600.

See if it will work for your model too.

http://h10032.www1.HP.com/CTG/manual/c00246219.PDF

How to reformat the hard drive and do a "clean" install

A recent virus attack, my computer has lost some files of the operating system. With the help of the Lim has provided the recovery disk, which offered ' upgrade/repair' or a 'new installation '. I chose ' install new ', actually I found many of my files are still there - that means that if a virus has escaped "Detection / removal" will always be there.

Question: How to reformat the hard drive and do a 'fresh install' on a clean hard disk "? ". (I have a drive to Win XP with service pack 3 and a driver disk for the hardware installed on my computer of the regulations.)

Thanks in advance

Skip

Since you have a Dell and a recovery CD and not a recovery Partition, check how many partitions you need by using disk management:

http://www.theeldergeek.com/disk_management.htm

In case you have a partition with the operating system and a partition of the utility partition, I would only recommend formatting the partition from the OS. The Partition utility can be very useful.

How to delete the onrecovery drive on vista

Similar Questions

Maybe you are looking for