How do to check date limits

Similar Questions

• How can I check for dates that are the same for today.

  If I have a bunch of dates in a datetime colum. How can I check for dates that are the same for today.
  "For example, this value of days would be ' #dateFormat (now (),"mm dd yyyy") #
  
  The best I could come up with was:
  
  Select * from data where data.userID =
  2635 AND
  "Convert (varchar, dateAdded, 101) = ' #dateFormat (now (),"mm dd yyyy") #
  
  
  How can I get this to work smart peeople :)

  It is best to make the comparison on the datetime values. One technique is to get the current date at midnight. Then add one day to get tomorrow's date. In your sql query finds all values is greater than or equal to today and less than tomorrow.

  One solution is to do everything in MS SQL

  WHERE the dateAdded > = convert (datetime, convert (varchar, getdate(), 112), 112)
  AND dateAdded = dateAdd (d, 1, convert (datetime, convert (varchar, getdate(), 112), 112))

  Another option could be to use CF to calculate dates:

  
  

  WHERE the dateAdded > =.
  AND dateAdded<>

• How can I check if the Satellite Pro A300-1 GR drivers are up to date

  Hello!
  How can I check easily at any time if the drivers of my Satellite Pro A300 - GR 1 are updated? I already thank you for your support.

  Hello

  On the Toshiba driver European page you will always find the number pilot s versions and you can compare it with the s version of the driver installed on your laptop.

  In addition the [Toshiba Tempro | http://eu.computers.toshiba-europe.com/innovation/generic/TEMPO_RELEASE/] application keep you abreast of software updates and the latest Toshiba driver as soon as they come out on the European driver Toshiba page.

  But just a hint; If your laptop works without problem, then I would not change anything in the operating system. I'm always that notice; never change a running system ;)

  Good bye

• during an update lots of my profile folder has been put in a folder on the desktop marked the old data. How to restore this data file

  During a bet to update, automatic update of windows has started and some how much my profile data has been removed and stored in a file on the desktop. There is a simple and easy way to restore this folder from the current firefox?

  You can use the contents of the Old Firefox Data folder to "roll back" the refresh, but this involves several steps. It's probably even faster than the recovery of individual files and load those into your new profile.

  Check in the folder 'Old data Firefox' update adds a folder with a random semi name on your desktop. If there is only one, that probably has your old settings and Add-ons. If there is more than one, you'll want to work with one who has been updated recently.

  Once you have identified the profile folder, that you want to restore, here is my "old profile resurrection suggested procedure:

  Overview

  Here are the steps described in more detail below:

  1. Create a new Firefox profile
  2. Delete all of this profile folder
  3. Copy in all of the old profile folder

  Create a new profile for Firefox (Windows)

  Exit Firefox completely and start up in the Profile Manager by pasting the following in the Windows search, or the Run dialog box by pressing ENTER:

  firefox.exe -P
  

  Note: any time want to switch profiles, exit Firefox and return to this dialog box.

  Click on the button create a profile, give it a name like OldSettings and skip the option to change the location of the folder. Select the new profile from the dialog box, and then start Firefox.

  Open the new profile folder in Windows Explorer

  Firefox in the new profile should look like a new installation of the plant. Open the troubleshooting information page by using either:

  • button "3-bar" menu > "?" button > troubleshooting information
  • Menu help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table, click on the view file"" button. Firefox will launch your new profile folder in Windows Explorer.

  This folder open, switch back to Firefox and get out by using either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Firefox is closed, the profile folder must be front and Center, or you can activate it by using the taskbar.

  Copy old data instead of new

  In this new profile folder you just popped open - NOT the one on your desktop - select all content (you can use Ctrl + a) and delete (you can press Delete on the keyboard).

  Leave this window open, open or switch to your folder of old data of Firefox. Consult your old profile folder. At this level, you should see a folder named bookmarkbackups among other things.

  Select all (Ctrl + a) and copy (or right-click > copy or Ctrl + c).

  Switch to the empty profile folder in another window and paste (or right-click > paste or Ctrl + v). This may take a few minutes because some files are large.

  Launch Firefox

  Firefox should start in this 'new' profile with the old resurrected profile data. Success?

• How can I check if I have a virus?

  I'm panicking because my last laptop died because of a virus and I don't want the same thing to happen to this laptop. I went on a streaming movie site and my laptop automatically downloaded a file. I quickly moved to the trash and deleted. How can I check if my laptop has a virus, also how do I adjust it so that the files will be automatically downloaded without my consent? Help a large part would be appreciated.

  Hello...

  You can check adware or malware > click download here > https://www.malwarebytes.org/

  Maintain the system software of your Mac up-to-date is the best way to avoid malicious software.

  Open the App Store, and then select the updates at the top of the menu in the window of the App Store.

  In Safari > Preferences > General be sure: Open 'safe' after downloading files is NOT selected.

• How can I check the disc for physical integrity on Satellite P305?

  I have P305-S8838.

  I had some freezing problems earlier this month, and on the notice here, I nu start-up and reduced services a little at a time.
  Now, I have a few more crash but don't know if it's a physical disk problem.

  For example... I have run CHKDSK and does many things and happens at the exact same spot and hangs at step 4 file 5 3498 or 421168 processed.

  I tried to run CHKDSK in SafeMode but tells me drive is locked and it will run when I restart. But the restart put back me in normal mode and get the same hang.

  Now, for more suspicion of a physical problem. I tried to make a disk image with ACronis and same problem occurs because he says impossible to reading data 226 964, 072 sector and ask if I want to ignore and continue. I say yes to everything. Log shows he made about three of these attempts and crashes.

  I ran sfc/scannow and it says found problems that he was unable to fix. The newspaper isn't so long and complex course that all means. I could send these log files if someone can help me understand.

  I ran the test of memory OK.

  I if I could put in DVD Toshiba and certain diagnoses, but when I put in the disk I get this big warning I'll crush, etc and I have chicken.

  This didn't stop me to use the computer, but its all irritating.

  How can I check the disc for physical integrity?

  Bob

  Hello

  He idea goo to check the HARD disk and run some diagnostic procedures.
  For this, I recommend the freeware tool called Drive Fitness Test.
  It allows you to check the HARD disk for certain physical defects.

  Google for this tool. You can get it from multiple pages download

• Camileo S20 - How to display the date and time

  Hi, all. I got as Christmas present the Camileo S20, and I am not able to view the date and time in the video. In the manual is no reference on this subject, only how to set the date and time. But what is the intention to set the date and time in the camera, if it is not possible to display video?

  Hello

  Have you checked the user manual of your TV cam?

  If it of possible to display the data and the time you can find in your user manual how to do this. It always interesting to read ;) s

• How much of my data to my computer Windows Xp can I convert an Apple computer

  How much of my data to my computer Windows Xp can I convert an Apple computer.  Will it take all new programs (software)?

  As the software will, Yes, you will need software almost entirely new.

  If you have installed your software to check disk (cd or dvd) of your software box came in. It will say if it is Mac compatible. Some discs of software include installers for Windows and Mac computers.

  The good news is that a lot of software that you are familiar with the use of Windows is a Mac version that you can buy. For the instance of Microsoft office - you can buy a Mac version of the software and will be able to open your existing Word, Excel, files etc. that you have on your XP computer.

  So far as photo/image files, PDF files and other common files of format you have on your XP computer, you will be able to open these files very well on a Mac.

  Good luck on your switch. As a recent PC to Mac converter, I don't know if anybody somewhat a challenge. But I found it's worth!

• Equium M40X - error at startup; 0271: check date and time

  Hi when I start the laptop the message:

  ERROR
  0271: check date and time
  WARNING
  0251: System CMOS checksum bad - default configuration used

  Press to resume, installation

  I guess it's because my CMOS battery has had? Is this a known issue with this laptop and how do you get him to replace?

  Hello

  It seems that your laptop is the wrong time in the CMOS (BIOS).
  If you can get into the BIOS, check the date and time settings and ensure that they are correct.
  It may also be a case of the CMOS battery out. In this case your laptop will tend to not keep the correct time.
  In this case, you must connect the power adapter and should leave it connected for 20 to 24 hours. At the end of this period the CMOS battery must be fully charged.

  Good luck and best regards

• Error 0271 check Date and time - T60

  Whenever I start my T60, it is said to check date and time settings and go to the BIOS, which emits only if I press one of the buttons on the keyboard. Thinking it was a CMOS battery problem, I ordered a new one. However, the same thing happens again. I'm puzzled. How can I fix? Thank you.

  Welcome to the forum!

  You must scroll through "Time and date" settings in the BIOS, correct them and press F10 to save and exit.

  Good luck

• all my data is all save on the local disk c, how to share the data with the other drive, local drive d.

  all my data records on the local disk c, how to share the data with the other drive, local drive d.

  Hi Jasonbichard,

  1. what type of drive is D? Is - this another partition on the same disk?

  2 Windows operating system you are using?

  You can change the location of the disk to save the data in the d: instead of C: and check if it helps.

  a. navigate to the location (username) C:\Users\.
  b. right click on the folder that you want to change the location, and then select Properties.
  c. click on the location tab and change the location to D: drive.

  d. click on apply and Ok.

• How can I check if my computer is ok? I got an unsolicited phone call and allowed them to access my computer

  This morning, I got a phone call from an Asian man, saying: he has worked with microsoft, I found it very difficult to understand what he was saying and to rehearse a lot, he mentioned "Alureon" and says that my computer is one of the computers on crash today... He then wen on say that they should do support remotely. to help solve the problem, stupidly and against everything I've known I have allowed him... .it all seemed very alarming... it said my computer was about to crash in a few moments and I had to buy the red shield to protect... I hung up, but they called back... ultimately I told them I wasn't buying any and at this point, he got quite angry and asked me why I was wasting his time. How can I check my computer to make sure they did not hurt? and they can access my computer later? I'm asuming that Microsft had nothing to do with it.

  Hello

  It's a scam.

  If you gave them remote access and you do Internet banking, contact your bank, explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  See you soon.

• How can I check to see if I have a corrupt registry

  How can I check to see if I have a corrupt registry and how do I fix this problem

  Hello

  If you have a damaged registry, there will be an error message and system problems are not associated registry.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  ------------------------------------------------------

  In some cases, an in Place upgrade/repair Installation is required which allows to keep the programs
  and although redundant data backups are always a good idea.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Hope these helps.

• How to set a date in a datefield?

  Hi, how to set a date ("24/02/2009") in datefield. the date ' 02/24/2009' is of type string and is in the format "dd-MM-YYYY" as same as datefield Date format. Thanks in advance.

  Is it analyze yourself and use the Calendar class to set the year, month etc you are ripping into the calendar object - then do a Calendar.getTime ().  Or use

  HttpDateParser

  If your data is one of the supported formats.  Sorry haven't checked myself.

  Don't know other ways in the J2ME code.

• How to compare two dates and find exactly

  How to compare two dates and find the exact age of the person, no one could be an age of child 2 days or a month, or other.

  I'd really appreciate if someone help o

  Concerning

  After spending 2 hours, I go out with a solution by myself, how ever the function can be customize to check if the user enters date right.

  function findAge(subjectName,fromdate, todate) {
      console.log("findAge(fromdate, todate) is called now "+subjectName+"-->"+fromdate+"-->"+todate);
      if(todate) todate= new Date(todate);
      else todate= new Date();
  
      var age= [], fromdate= new Date(fromdate),
      y= [todate.getFullYear(), fromdate.getFullYear()],
      ydiff= y[0]-y[1],
      m= [todate.getMonth(), fromdate.getMonth()],
      mdiff= m[0]-m[1],
      d= [todate.getDate(), fromdate.getDate()],
      ddiff= d[0]-d[1];
  
      if(mdiff < 0 || (mdiff=== 0 && ddiff<0))--ydiff;
      if(mdiff<0) mdiff+= 11;
      if(ddiff<0){
          fromdate.setMonth(m[1]+1, 0);
          ddiff= fromdate.getDate()-d[1]+d[0];
          --mdiff;
      }
      if(ydiff> 0) age.push(ydiff+ ' year'+(ydiff> 1? 's ':' '));
      if(mdiff> 0) age.push(mdiff+ ' month'+(mdiff> 1? 's':''));
      if(ddiff> 0) age.push(ddiff+ ' day'+(ddiff> 1? 's':''));
      if(age.length>1) age.splice(age.length-1,0,' and ');
      console.log("===============================");
      console.log("Subject age is = "+age.join(''));
      console.log(" age Day = "+ddiff);
      console.log(" age Month = "+mdiff);
      console.log(" age Year = "+ydiff);
      console.log("===============================");
      var subjectAGE =  age.join('');
  
  }
  

  peardox Thanks for the reply