How do you get permission to reinstall windows 7 when the system hangs

Similar Questions

• How did you get Firefox to save a password when the prompt 'Remember password' is not pop up?

  Is there a way to make this message pop up?

  If you click "Never" you have created an exception that you should remove.

  Location (s) remove the Exceptions:

  • Tools > Options > Security: passwords: Exceptions
  • http://KB.mozillazine.org/Password_Manager

  Make sure that you run not Firefox in private browsing mode

  • https://support.Mozilla.com/kb/private+browsing

  Mode of private - browsing using Firefox without saving history Firefox don't fill automatically names and passwords and does not store the new passwords.

• How can I get information to reinstall windows vista?

  I had to replace a hard drive and install windows, but I lost the drive and other information that came with my laptop.

  How can I get information to reinstall windows?

  How to replace the Windows Setup disks depends on how you bought Windows.

  When you bought a copy of Windows retail:

  How to replace Microsoft software:
  http://support.Microsoft.com/default.aspx/KB/326246

  If Windows came with your computer - to replace the installation disks:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

  http://support.Microsoft.com/GP/oemphone/

• How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you reconnect then wireless.

  problems with wireless Vista "local only".

  How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?

  Hello

  Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer.  Since he does not have details of the database of network devices, communicate with him.

  • You are able to access the Internet?

  Try the steps mentioned below and check:

  Method 1:

  Step 1: Enable or disable a network adapter and then check:

  http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter

  Step 2: Run Network Diagnostic tool and check:

  Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference links:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041

  Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx

  Hope it works.

• How do I get another copy of Windows XP, if the disk has been lost?

  Lost my cd of Windows XP. I would like to format my computer, real slow. I have the product key sticker on

  the side of my computer. Can I get a copy of the op and if I can use the same key?

  * original title - OP Windows XP have since lost the cd to reinstall how can I get an another copy__I have the sticker of the product key on the side of my computer *.

  Hi NickieA,

  It seems that your Windows XP is preinstalled on your computer.  If this is the case, you should be able to return to the manufacturer of the computer for request restore media/install disk.  They may charge you a fee according to the manufacturer.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can you get your files to show again after the Trojan horse?

  My files on my external hard drive does not show, although the properties show that they are still there. I tried to post, and I made sure my hidden files show in windows control panel. But cannot see them. Did the same thing on my memory stick. Files on onboard hard drive all indicate. Any help please

  Hi LizelleAvenant,

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the external hard drive?

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner in the external hard drive.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Try to connect the external hard drive on another computer and check if the problem persists.

  Method 3: Run the disk check to check for possible errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• How can I reinstall windows xp when the computer does not start and there is no cdrom/dvd drive?

  I have an Acer netbook aspire one.  It will not boot past the windows logo.  I have a windows xp disc to reinstall windows, but the computer has no CD or dvd rom.  Can I copy cd of windows xp on startup SD memory card and reinstall windows?  Or can I run connect the non working pc a working PC to access the cdrom on the work pc to reinstall windows?

  First of all, you are mistaken when you say that the PC does not start.

  This is clearly starting. The problem comes from Windows, not with the real PC. It's actually a very important distinction!

  There are methods to repair Windows, but they can be a bit tedious. By all means, follow the advice given here to do if you're so inclined.

  If you would not rather to repair Windows (and I think it's interesting a try) or your repair attempts are unsuccessful, apparently, you would need to use an external optical disc drive and follow the instructions here:

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

• How can I get pictures of LR windows file when it is said that they are offline or missing?

  I loaded photos to LR, where I made a few changes. They were JPEGs. I deleted some in LR who went to the trash. Originals were in a file windows 2009-11-08. As I saw no changes in the images of windows, I decided to transfer LR images to the original file and opted to replace the originals, could be a fatal error, it turns out that LR, I am new on this. So now the originals are missing in the windows file but the images are always in lightroom, but can't do something with them that show them in the library or the slide show. I want to put back them in the windows file to download on my blog and I really hope that they do not miss by telling me in lightroom. Don't see why they are missing, if I am viewing them. Try the suggestion of adding file support parent, then right click and locate don't remember exactly the procedure but I couldn't make it work. I need help? Thank you.

  By right (or click cttr) click on the folder. You will have a set of options, including synchronize them the folder. Unless you have actually moved the folder itself another somwhere. In which case you need to re locate everything first. (Update folder location). If you remove the actual file, re locate your back upwards (you don't have saved files when importing?)

  If you actually have two more wrote the original files, deleted the folder and could not create a backup, you're really in trouble (and managed to beat all the various guarantees embedded in LR... look through the video tutorials on the help site might be an idea!)

• After you import the MSWMM file in Windows Movie Maker, the system hangs

  MSWMM FREEZES (what a surprise)

  After opening MSWMM and import my project that the cursor movement will begin erraticaly i.e. movement one or two seconds after I try to point and the operation I required will take his time is erratic in the activation and the images are erratic when read.
  A minute or two later everything "freezes". I had to 'Leave' to turn the computer off, wait one minute, then restart. It's so bad now, I had to stop using MSWMM, it's useless and a great disappointment to me. When I exit MM the cursor is always random for about 10 seconds. How is the mighty Microsoft Corp. cannot challenge these problems and let us get our projects?
  All other times, the computer works fine. I have not downloaded anything to cause this problem. I've defragged, Spybotted Temp files deleted, disc error checked, tried different suggestions of Youtube, and restored hoping can solve it, no luck.
  I run WINDOWS XP, 128 processor ATHLON, 56 k MODEM, 1.5 GB RAM, 120 GB HDD, IE7, Service Pack 3.I have made 10 videos previously and had a bad light with MM before but he managed to cope, now that's too bad. So, does anyone have helpful suggestions to what I can do to fix this problem so I can continue with my projects, please?

  After opening MSWMM and import my project that the cursor movement will begin erraticaly i.e. movement one or two seconds after I try to point and the operation I required will take his time is erratic in the activation and the images are erratic when read.
  A minute or two later everything "freezes". I had to 'Leave' to turn the computer off, wait one minute, then restart. It's so bad now, I had to stop using MSWMM, it's useless and a great disappointment to me. When I exit MM the cursor is always random for about 10 seconds. How is the mighty Microsoft Corp. cannot challenge these problems and let us get our projects?
  All other times, the computer works fine. I have not downloaded anything to cause this problem. I've defragged, Spybotted Temp files deleted, disc error checked, tried different suggestions of Youtube, and restored hoping can solve it, no luck.
  I run WINDOWS XP, 128 processor ATHLON, 56 k MODEM, 1.5 GB RAM, 120 GB HDD, IE7, Service Pack 3.I have made 10 videos previously and had a bad light with MM before but he managed to cope, now that's too bad. So, does anyone have helpful suggestions to what I can do to fix this problem so I can continue with my projects, please?

  =======================================
  . MSWMM would be your Movie Maker project file if it is a
  complex big project that you have been working on for a while it
  can be to reach the limits of your system resources.

  Creation of several small projects is better than a large
  project. If you save all of them in the movie .wmv format you
  can import movie collected files and combine them into
  one final film.

  Also... it may be interesting to try to install IE8... I remember
  See the reports of users of Movie Maker who has
  with IE7. Personally, I went straight from IE6 to IE8.
  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  More information:

  Movie Maker 2 hangs and crashes
  http://www.Papajohn.org/mm2-issues-acceleration-and-codecs.html

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I need to find the source file or registry that creates "Services" Exceptions in the firewall of Windows XP when the system is restarted.

  I have a boot sector virus (Troj/MBroot-H) that I can not remove from my computer without losing access to my HARD drive due to a custom boot partition.  I can't afford to repair or replace the computer I have at the moment, so I try to disable things as much as possible to neutralize this virus.  I have already downloaded Malwarebytes and analysis had revealed 18 registry viruses and files that have already been removed from the system.  The HelpAssistant account and its files have been deleted from the system.

  The only thing left to change is the firewall of Windows XP.  I currently have to restore Windows Firewall to its settings by default whenever I restart my computer because the virus has configured the system to add more 'services' and 'management' objects in the list of Exceptions whenever the system is restarted.  If I don't do that an outside source will invade the system via remote desktop and add the HelpAssistant account and the file.  I need to know how to replace system orders that creates these objects for additional exceptions during the restart.  I want to restore full contol on the firewall of Windows XP by allowing not exceptions except those I choose.  Is there a Window XP Firewall registry key or file that can be removed, replaced or changed to keep these elements to be added to the list of exceptions?

  Thank you

  Spacejunkie1

  The computer is still severely infected and you will not be able to "establish complete control over the firewall of Windows XP". Backup your data and do a clean install of Windows. I understand that you do not want to hear this, but it is, IMO, the answer. Please specify your first sentence if you need assistance.

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  MS - MVP - Elephant Boy computers - don't panic!

• I am unable to find my Sony Vaio recovery disks. How can I get replacements to reinstall Windows Vista?

  original title: Download Vista?

  Crashed my hard drive with Vista and I can not find my Sony Vaio recovery disks.

  Can I download Windows Vista for free and install it using the key on the sticker?

  Hello

  It s no vista for free and legally download

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  http://eSupport.Sony.com/

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How do you get in square brackets [] is visible in the forumn?

  When I reply to messages with XPATH predicates that they keep away in the post because the engine forumn of formatting it's a URL. Does anyone know how to get around this problem?
  
  Thank you
  
  IKE Wiggins
  http://biupublisher.blogspot.com

  Use the tags (code)... (/ code) (replace the brackets with hooks). Appears like this:

  [anything]
  

• How can I get my copy saved Windows XP with the return to lose all current data?

  I had my PC worked on so I could play better. This tech guy did some work was right but put windows xp pro service pack 3. on this subject. He said it was legal and he went from checking. He did it for about 6 months. I lost my power in a storm and when I succeeded him and pulled upward it did not check my copy of 'registered '.

  Hi Maddmaatt,

  Thanks for posting. A few hardware changes may report a reactivation of your OS. To activate XP as he asks and take the phone option. The helpline can provide you with the new activation keys.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How do you get tools VMWare Fusion refuses to install the full package of VMWare tools?

  Host operating system: OSX 10.9.1

  Guest OS: Windows XP Home Edition SP3 with all relevant updates

  Running VMWare Fusion 6.0.2

  I want to reduce the VM - but:

  (1) by double-clicking on the icon of VMWare Tools in the status bar displays the dialog box 'a way'

  (2) right click on the VMWare tools icon is displayed 'About', 'Disable the icon' and 'Exit '.

  (3) there is NO entry for VMWare Tools in the control panel.

  WHAT I AM DOING WRONG?

  #@$%#^$%*(^*^%^#$$%@!!!!

  VMware Fusion 5 and 6 to shrink the disk automatically when you use Clean Up a virtual hard drive or take a look on Defragmenting, shrinkage and cleaning of disks of virtual machines VMware Fusion (1001934) and the shrinking a virtual disk using scripts in VMware Fusion 5 (2033583) (which should work always in VMware Fusion 6 too).

• How do you get an object to move away from the middle of the screen

  I have a game where a character moves with the arrow keys.
  I need the character dispersed form the center of the screen when I hit the arrow pointing upwards.
  How can I do this?
  
  Thank you very much for your help.
  RBR 1234

  :