How do you get the monitors when you start

Similar Questions

• the computer keeps going into hibernation... How can I get the monitor turns on and stop reading "monitor is asleep."

  The monitor lights. It reads monitor is asleep. Sometimes if I'm patient enough for the computer to turn on and off the screen lights up and indicates that the computer has been hard to get out of hibernation. How can I disable hibernation?

  Hello melissacrowley,

  1. you have the latest drivers installed for the graphics card on your computer?

  I suggest that you update the drivers for the graphics card and check if you have the same problem. You can check the below article which will give you information on how to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• How can I get the print spooler to start when the file is missing: lexbces.exe? where can I download this file?

  I TRIED TO RE-INSTALL MY HP WIRELESS PRINTER AND IT WOULD NOT INSTALL. I HAVE RECEIVED AN ERROR MESSAGE THAT THE PRINT SPOOLER WAS NOT WORKING AND STOPPED. I have TRIED TO START THE PRINT SPOOLER AND FOUND what IT MISSING THE lexbces.exe FILE. I THINK THAT WHEN I UNINSTALLED THE HP PRINTER, HE WALKED OUT OF THIS FILE. IT IS IN THE SYSTEM 32 AND A FILE OF REMOTE PROCEDURE CALL. DOWNLOAD THIS FILE OR DO I HAVE TO RE-INSTALL WINDOWS XP?

  Lexbces.exe is from Lexmark (or Dell-badged Lexmark) printer install.  When the Lexmark printers are installed, they configure the print spooler to depend on Lexbces.  Unfortunately, when you uninstall the software Lexmark, the uninstall program removes the file but does not have the print spooler dependency.

  Open a command prompt window (start > run > cmd > OK)
  Type the following line in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS

  Note that there is no space before the = but there is a space after it.

  Restart the computer.

  See the instructions on One Article to do a clean installation of your printer.

  After the restart, you can check that the print spooler has started in several ways.  One way is:

  Open a command prompt window and type the following command, and then press ENTER:

  spooler request SC

  You should see the following in the command prompt window:

  spooler request SC

  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

• How can I get the error "Unable to start the service" on attempts to run administrative tools (including the Services application) when logged in as an administrator?

  A large number of menu selections is affected, including the 'computer management', 'Event Viewer', 'Services' and 'System Configuration'.
   
  I tried to clean a computer that was thus invaded by unwanted applications and the services that it was unusable.  I applied several sets of Windows updates until it has been fairly stable, then lightened through the Services application services, changing many services 'automatic' to 'enabled' or 'disabled '.  I suspect that some service necessary for the performance of the foregoing has been inadvertently stopped.  (None that he was '' strongly recommended '' or '' recommended '' do not turn off or the description seemed to make a requirement, but...)  I don't know how to confirm this theory, identify the missing service or reactivate a service without the Services application.

  I got lucky.  I called a local, independent computer store.  Their support staff (after confirming that I had an appropriate Windows license) told me that if the computer came with a disk for Installation of Windows Vista, there is probably a partition to start installation on the hard disk, I could get to with a special touch at the beginning of the start-up phase of the BIOS.  It flashed by so quickly that I missed my chance, so I put off the power while trying to boot Windows.  On my next attempt, I missed again (even if I managed to spot the key combination - F11).  But when he arrived at the start-up phase of Windows, he offered me a chance to run the system restore which was banned when I was logged in with an administrator account.  I had to go back a ways, but I found one who would start and was able to complete cleaning of the machine and make it to a usable state.
   
  Thanks to all who responded.
   
  Oh, and it seems (according to my conversation with the service of the local computer store) that my fatal mistake was by disabling the service allowing you to promote its own security.  Apparently an administrator account is not the rights needed to perform most administrative functions without it; If disabling the service gets you into a nearly unrecoverable state.  A hint of that in the description of the service, or even a total ban on deactivation, would be a good idea.
   
  -Kevin

• In Windows Media Player 11 when spend to add songs, how get the list to stop starting at the top?

  With WMP11, when adding pieces of the current reading library, I often change between two tabs. My question is every time I switch back to the library to add more songs, tab how can I get the list to stop starting at the top? I have a number of songs scrolling on there where I left last can be very inconvenient. I remember with an older version when you leave the library, that he would stay where you left it. Yet once, how can I stop the library always start at the top and instead pick up where I left off?

  Thank you very much

  Reinstalling wmp11

• When you press the new tab, how can I get the homepage instead of the history of tiles?

  When you press the new tab, how can I get the homepage instead of the history of tiles?

  You can try this.

  • https://support.Mozilla.org/en-us/KB/new-tab-page-show-hide-and-customize-top-sites#w_how-do-i-turn-the-new-tab-page-off

  Instead of the parameter mentioned pref in about: blank, you can enter any site of your choice.

  Ex: encrypted.google.com

• How can I get the 'secure site' (padlock) icon to display when you access a web page secured with Firefox 4?

  The "secure" (lock) icon no longer appears on the status bar (or anywhere else I can find) when you go to a secure web page. How can I get the 'secure site' (padlock) icon to display when you access a web page secured with Firefox 4?

  You can add a 'lock' the b-I-S with this extension.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/padlock-icon/

• I use 3.6. How can I get the update to look like this? I really don't want to use IE or MSN but if that's all that I have, then let me know. Thank you

  I use 3.6 because I like how it spans my toolbars instead of just me giving bookmarks in the corner and firefox solitaire in the opposite corner. I know that I can open the bookmarks bar, but it's not the same. I want that the file, editing, display, history, bookmarks, tools, help toolbar throughout. How can I get the new firefox to do this

  This should duplicate the image you posted what you look for Firefox 5 in (this application should be BLOCKED) double wire.

  Menu bar

  • Right click on a blank space at the end of the tab bar, click on 'Menu Bar' to place a check mark
  • Checked menu bar = bar menus; Firefox button
  • Unchecked menu bar = bar menus; The Firefox button
  • Other methods of doing the same thing:
    • Click the Firefox button > Options, click on menu bar
    • Quickly activate/disable Menu bar, power: ALT + V + T + M

  Tabs on top

  • Right click on a blank space at the end of the tab bar, click "Tabs at the top" to remove the check mark
  • Tabs on top checked = tabs at the top toolbars
  • Tabs on top unchecked = tabs below the toolbars
  • Other methods of doing the same thing:
    • Click the Firefox button > Options, click on the tabs on top
    • Toggle Quick tabs on top on / off: ALT + V + T + T

  Separate the Reload / Stop button and the position of the Home button

  • Open the Customize; do one of the following:
    • Right click on the empty space at the end of the tab bar, choose "Customize".
    • Click the Firefox button > Options > toolbars
    • If you use the menu bar, click View > Toobars, click Customize
    • Quick open window customize: ATL + V + T + C
  • the buttons Reload and Stop appears distinct between the URL/address bar and the search bar. When the window customize is open, do one of the following categories, to separate the buttons:
    • Drag the button to the left of the Reload button
    • Drag a 'space' between the Reload and Stop buttons
    • Drag one or two buttons anywhere on the separated by a 'space' or another icon Navigation bar or reverse the order of Stop-Reload to keep them separated
  • Drag the button to the right of the search bar
  • Click "Done" in the bottom right of the window customize when you are finished.

  Color backward/forward, home, the buttons Stop and reload

  • Install this module: https://addons.mozilla.org/en-US/firefox/addon/firefox-3-theme-for-firefox/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• How can I get the game controller that you want to correlate to the keyboard commands?

  How can I get the game controller that you want to correlate to the keyboard commands?

  You may need to use the profiling software that comes with any game controller you are using.

  Some software controller has a library of game titles with default button/key configurations that

  You can change in the software according to your desires.

  -The software will need to navigate you to the games executable ( .exe ) from in the profiling software, which allows for the profile that you create in order to be recognized when you load the game in question.

  You can create orders, or simply assign a key combination, of a particular button on the controller

  and save the profile.

  -If the controller does not have a profiling software available for download, you may be stuck

  with some default orders can work with this controller and as a monopoly$ insinuated oft

  the controller XBOX games PC as a default configuration, a few years ago, it could mean

  your controller can be very useful if it is not programmed to emulate the XBOX controller.

  -If your controller is programmed to emulate the XBOX controller (like many recent controllers)

  It should be just a matter of changing the configuration in game controller options.

• How can I disable the voice when you type with iOS 10.0.1

  How can I disable the voice when you type using iOS 10.0.1?

  GO to settings - general - accessibility-speech - Feedback-turnoff typo Word...

• How can I customize the toolbar when you use the browser of the attribute

  In CVI 2012, changes in the toolbar depending on the environment, for example, it is different to the source window and the user interface editor. The toolbar can be customized using the Options menu / toolbar...

  Unfortunately, when you use the browser of the attribute of the user interface editor, another toolbar is displayed, i.e. not the UI Editor toolbar... I would have assumed that the browser of the attribute belongs to the user interface editor, obviously this isn't... So, how can I customize the toolbar when you use the browser of the attribute?

  
  

• I get the following when you try to run programs such as Nero "this program requires the file AdvrCntr6.dll, which is not on this system."

  I get the following when you try to run programs such as Nero:-"this program requires the file AdvrCntr6.dll, which is not on this system."

  Please can you help me?

  Original title: AdvrCntr6.dll

  Hello.

  There is a guide for fixing here:

  http://pcsupport.about.com/od/findbyerrormessage/a/advrcntr6-DLL-not-found-missing-error.htm

• Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.

  Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.

  Miguelo28272279 for more information on how to solve the connection error preventing your membership to authorize please see sign, activation or connection errors. CS5.5 and later, Acrobat DC.  We invite you to update this discussion if you have any questions about the steps listed in the document.

• How can I change the scale when you use the measure tool

  How can I change the scale when you use the measure tool

  With the tool selected, right-click the document, and then select "rate of change of the scale.