How do you ruler ticks every 12 inches instead of 16-inch display?

Similar Questions

• How do you get the normal taskbar? It is 1 inch thick

  The taskbar are 1 inch thick at the bottom of the screen. It takes only about a quarter of an inch.

  Icons & clock in the taskbar is vertical instead of horizontal. The clock also day & date

  How do you get it back to normal?

  See the second example (how to resize the taskbar Windows) here: http://www.timeatlas.com/5_minute_tips/general/how_to_resize_or_move_windows_taskbar

• How do you keep your Microsoft Account e-mail address is more displayed on the login screen of Windows 8?

  I do not have my e-mail address Microsoft Account displayed on the login screen of Windows 8, when I have my local account linked to my account from Microsoft. If I give a presentation I don't want viewers to see my e-mail address, and also for security reasons I would like to remove. Is it possible to do this? Thank you!

  You can't, it belongs to start cold initial process.

  However, you can stop the process of re - open a session after a period of inactivity or sleep by turning off the function of password via Power Options in Control Panel.

• How do you define continuous grates/measures in inches?

  Is there a way to permanently define grids/measures in inches instead of picas? It takes twice as long to create a new file because everything is in picas... having to change preference every time... which is not normal.

  Hello

  Without documentation open, go into preferences and on the left, under 'Units and increments', you can set them there. Now, when you open a new document, they will show your new settings. In addition, if you right click on a rule, you can use the context menu to change the parameters of the rule. I hope this helps.

  See you soon!

  -Mikey

• How can I do to make the taskbar allows you to hide every time I have remove the slider from?

  2 questions: How can I do to make the taskbar allows you to hide every time I have remove the slider from?  This rarely works.  Question 2: name of the task SystemSoundsService is called by the Microsoft PlaySoundService class action.  What is his function, and above all, what is the best place for these tasks apparently running in the background all the time?  Is it good to put an end to this task?

  Hello

  Check the scheduled task SystemSoundsService here.

  Description of the scheduled tasks in Windows Vista
  http://support.Microsoft.com/kb/939039/en-us

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I change from mm to inches in Page layout when you customize?

  How can I change from mm to inches in Page layout when you customize?

  This forum is for developers who use the LR SDK.  Your post in the main forum of LR will be enough: need to change the dimensions of mm to inches of layout using custom calibration.

• How do you want to give visibility to your campaigns to feed?

  Breath of email, I never really liked you and your poor performance, but I do not envy how it was easy to communicate to the team expanded internally.

  "We are launching an - nay, epic - heroic email that will go to tens - (hundreds?) thousands of people, in this day, and that's where the creative element. »

  "What is marketing do? Who has not heard of that? I hear it a lot to feed. "Why, we're busy, developing exciting programs complex, iterative, multi-step triggered behavior of the user, of course".

  There is a terrible analogy, but campaigns to feed a colleague compared to car accidents - they happen every day, but do not have national news. Explosions? Page completely.

  You have this problem of visibility to your campaigns to feed? How did you resolve?

  Hi Mark, what I always did and it has worked, is to transform my super automated and full of measures promoting the campaign.

  in a 3-column table:

  day 1 - teaching email - overview email link

  day 10 - Webinar - preview e-mail invitation link

  Day 18 - white paper - overview e-mail email link

  etc...

  And in another section/slide, I also add:

  -Objective

  -Segmentation description

  -The descriptions of rules (for example if the contact changes to the 'client', the lead will close)

  -Total

  I share this information with the teams involved, and then add a link in the CRM where people can access to see the email being marketing campaigns (link can lead to a wiki space or another tool that your business uses to share documents).

  Finally, in order to support and promote the campaign, I also advertise in our social network society and I publish weekly results.

• Watch does not recognize the weight class as exercise-how can you add the duration of activity manually because none of the presets eg elliptical etc. is appropriate. Also does not count calories for example 35 when the rest of the group is around 500

  Look does not recognize the weight class as exercise-how can you add the duration of activity manually because none of the presets etc for example elliptical is appropriate and therefore do not count toward the daily goal. Also does not count calories for example 35 when the average of the others in the group is around 500.

  Hello

  When you use the application of the training session, choose the type of activity that best fits your business. For anything else - like weight - select the other category.

  During the follow-up of one year to the next helps:

  • Activity app will credit the ring of progress of exercise with one minute for every minute of the workout.
  • Active calories will be based on the data recorded by the heart rate sensor or a brisk walk, whichever is greater.

  Note, however, that the heart rate sensor is likely to give better results for the workouts that involve rhythmic (for example running) rather than the irregular movements.

  More information:

  Use of the workout on your Apple Watch - Apple Support

• How would you do that? 2 case of a test station

  I have a sequecne that works great stand alone, that now we want to add another test power to the system. It is not as easy as it may seem, here are the conditions and what we intend to do. I need to have either 2 instances of the running program or configure the sequence in batch or in parallel, but I'm a little confused on how to do it properly.

  Features of the system:

  • 2 - test fixtures with 24 pieces in each. The sequence works fine now with only one test. I decided not to do a batch with these 24 pieces because I have a single DAQ mx read for all of the object to be measured and there is no need to follow every 24 parts. they're all to fail.
  • The two test devices will use the same DAQmx device for measurements. Compaq DAQ with USB (device 1 is for the test set-up 1 and 2 is for the test set-up 2)
  • They share a DIO Board for some discreet signals.

  My questions:

  1. Socket 1 or 2 Socket may have parts on them separately. A my load 1 operator and not the other and start the test. During the test, they can load up to 2 and start it too. Both must run exercise but share the Compaq DAQ device
  2. How do you run the shared resource (lock during the measurement, semifore?)
  3. Is this possible at all?
  4. Can I run two instances of the same UI? It would be the ulimate. With 2 points of entry and 2 displays for the recall of the UI to write to.

  Thanks for any input you can give me.

  You can have several instances of TestStand running almost any version.

  Here are a few options:

  1. run two user interfaces and usage and asterisk to prefix your lock names (for example "* DAQmxDevice").  This lock will then share in all of engines.  In fact all steps of synchronization may use the * to precede the name of share it across engines.

  2. create a custom with 2 managers running user interface and then 2 sets of views of implementation on the front panel.  When they execute you can somehow indicate the file in sequence (with a UIMessage) whose execution were fired off the coast.  Then, he will know which set of DUT it is testing.  Use of the * tip for your locks.

  3. what you should be making use of the parallel model.  It takes care of everything in your needs right out of the gate.  In other words, the user can run what socket they want from the parallel dialog box.  Use the normal locking mechanisms.  I've attached an example.

  You will get the best performance and control of option 3.  Suffice to say.

• How do detect you if a person spying on your computer. How do you keep it

  I have 2 pc. You can detect if 2 pc spy remotely on pc1. If so how do you keep it

  Hi Traci,

  I can't provide technical and tactical spy, hacking methods, or how to use malware to infect a computer with programs or also in a forum dedicated to protection against such things - I don't know if it would be a violatiion of the forum (more likely) COC, but it would be a violation of my ethical principles.  There are countless methods.  I will go this far just to give you an idea (and this is more or less a "sanctioned" method used by employers and parents to monitor the activity of employees or children and not the most sophisticated hacking methods)- and I'm not recommending or suggesting this program (I almost never recommend paid software when I can usually find free options that work almost as well and I don't know anything about and) just a quick did search to find one to use as an example), but just use it as an example of what can be installed, see: http://spysoftware.com/spyagent.html which is even more powerful with a direct administrative access to your computer.

  If someone has administrative access to your computer, then it is extraordinarily difficult for anyone to detect it or prevent espionage (if done correctly).  I don't know yet I could do (detect-not necessarily in place - according to the way it was done - well well, I might be able to do it if I knew it was going on and worked on the problem until I found the culprit, but that could take days or more and some very sophisticated and software procedures may be special) , and I'm very concerned about security.  With direct access, it is just too easy to do it in a way that will be almost impossible to detect.  Depending on your operating system and how much effort you want to put into it, there are steps to take to minimize the problem.  If you are allowed to block the person who has access, it becomes even better.  If the question concerns only protect against certain types of espionage (as opposed to any type), then it becomes easier again - but even in this case, there are some guarantees if they have the same level of access (or access) and direct access to your computer.

  In some cases, using spyware on yourself (that you install to spy on your own computer) can detect other spyware activity or activities (I used successfully this particular thing before) - but there is no guarantee (as it can potentially be bypassed if anyone knows there or by using techniques that do not trigger to detect activity) - but it has sometimes proved effective (note it does not - it CAN help to) detect if things and knowing that and possibly how it is done you can take improved or maybe even effective preventive measures until the inability to spy is detected and then they would just adapt to overcome or escape from your preventive measures).

  The honest answer is that, to get the protection you want, you need to block to have this level of access to your computer (after a format and a clean install in order to eliminate what they've already done).  Once they are blocked, then the methods to use normally appear more ordinary procedures, if you knew what to look for.

  If you allow me, why you allow him to have access to your computer?  If you are trying to overcome parental control, then I will not help you and you should reconsider what you're trying to do (and even if it works, they will know that you have done and can eventually impose restrictions that greatly limit your activities and who are far worse than the spy was in the first place - that is how I would react as a parent).  If you try to overcome the employer monitoring, efforts to work around could have consequences job that you do not want to happen.  If it isn't, then why are you allowing this access and what are the rules for your ability to restrict this access somehow?   Also, is there a specific business type that you are specifically concerned about or is this activity?

  As Robert has said, it is better, if this is done in a separate thread, but if you want me to participate, at least after the link to this new thread here as an answer I cannot not otherwise it exists and it will almost certainly miss myself (although others can certainly help you as well).

  I hope this helps.

  Good luck!

  PS Instead of creating another post for your other question, see the following for an explanation of the features of keylogger: http://en.wikipedia.org/wiki/Hardware_keylogger (NOTE: it's hardware, not software since you said "peripheral").  Keylogging can be done using software as well.  For more information about keylogging devices and make sure that not all of these sites are safe (as with any general research), see the general Bing following research: http://www.bing.com/search?q=keylogger+device&PC=BB07&QS=n&first=11&FORM=PERE.

• How do you decide when off Xoom vs let it sleep?

  I spend much of the time away from all access to power, then I want to be as effective

  as possible. How do you decide when it is best to stop vs completely let Hibernate Xoom? It seems to me that it hibernaes very effectively but it need a break point again somewhere.

  Thank you

  Holly

  @HollyR,

  I have to hand it to you, I love camping and back to nature from time to time, but 2-3 weeks in the Woods without electricity or running water, Great Scott! Under these types of conditions extended, I load it into my car (Delorean) every day and still allow it to 'sleep' rather than turn it off. Now, if your romantic bungalow in the Woods can't get a 3G signal (and if you have a 3 G Xoom - I can't say your info), then I would turn off WiFi and 3G while cabin and you will need to only load once a week. My car charger recharges my Xoom in a few hours and I have a 12V Jack ' always on ', so that the Xoom can charge with the car off the coast (without breaking measurable on the car battery or other).

  For your time spent at home with electricity, I definitely always leave on standby and recycle power only about once every two weeks (unless you have problems).

  Yes, the flux capacitor is very cool, but you have to manage the time travel with some discretion.

  Where we are going, we don't need roads...

  -Doc

• in windows 7 when you right click on how do you get the little line under the letter of the you can click on to make it open Windows 7

  in windows 7 when you right click on how do you get the little line under the letter of the you can click on to make it open Windows 7

  Example when you right click on a program, you can see Open if you click o the file opens, it was in XP, but not in 7

  That's what you want.

  1 - Open "Control Panel" and go to accessibility.

  2 - click make the keyboard easier to use.

  3. the title of 'Make it easier to use keyboard shortcuts' tick the box 'Underline access keys and keyboard shortcuts' and click 'Ok '.

  Oh sure, it could be useful.

• How can you determine what content gets what the card design?

  I designed 4 types of cards... all with widths of different column etc...

  How do you attribute this piece of content/collection gets what the card on your navigation page design?

  I tried to figure this out for the last 2 days... trying to work through different scenarios etc.  but no luck.

  Once you create the maps, you must create (or modify) the layout with mapping rules. Mapping in the layout rules determine which cards are used for page layouts. Here are a few resources:

  Create maps and layouts | Tutorials Adobe Digital Publishing Solution

  Digital Publishing Solution helps | Create maps and layouts

  Understand the detailed map layout

  Understand the detailed grid presentation

  Understand the detailed map mapping rules

• How do you prepare a PDF for 4 signatures & dates?

  How do you prepare a PDF for 4 signatures & dates?

  Hello

  You can achieve this by using text tags. EchoSign text tags are specially put in text format which can be placed anywhere in the content of your

  document specifying the location, the size, the type of areas such as the signature and first fields, checkboxes, radio buttons and form fields and advanced optional field, processing rules. Text tags can be used also as PDF form field names.

  Text tags are converted to EchoSign form fields when the document is sent to the signature or uploaded to the library of documents EchoSign. Tags text EchoSign can be placed in any document type such as PDF files, Microsoft Word, PowerPoint, Excel and text (.txt, .rtf)

  Please refer to page 5 (date) and 10 (signature) of the document create Adobe forms Echosign with text Tags.The can be found here

  Thank you

  Jat

• How would you save the whole VM from a free ESXi host?

  As the title suggests the question. How would you do a backup periodic and automatic complete virtual machine (all VM files) that run inside a free ESXi in an ethernet disk located in the network (for example, every night or every week)?

  Is there any script task or program that I could create in the ESXi host for this? Or, is there a free tool I could use to do? Please keep in mind that I use a free ESXi and I do not have anything but the free one.

  Thank you.

  WarlockArg.

  Take a look at this free script: ghettoVCB.sh - alternative free for virtual machine backup of for ESX (i) 3.5, 4.x & 5.x

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".