How do you want to test a new iphone

Similar Questions

• How can you get rid of the "new tab" page that flashes what you did recently? I don't like this option...

  How can you get rid of the "new tab" page that flashes what you did recently? I don't like this option. If I wanted to Flash all the pages I've visited, I would. It is not YOUR place to do it for me. I'll change the browser if it is not changed.

  Hello, please refer to customize the page new tab to turn off the function.

• Need advice. Would you sink (at least) $600 to replace the screen on a MacBook Pro 13 inch retina end 2012 or you want to buy a new one?

  Need advice. Would you sink (at least) $600 to replace the screen on a MacBook Pro 13 inch retina end 2012 or you want to buy a new one?

  You can buy a worn integers for that.

  Only if your machine is Virgin and you want only one specific

• How do you want to re - build windows vista 32-bit.

  How do you want to re - build windows vista 32-bit. My computer crashed while it was up-to-date.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  _________________________________________________________________

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• How do you want to start typing on sticky notes

  How do you want to start typing on sticky notes

  Here is the procedure: http://www.vistax64.com/tutorials/93264-sticky-notes.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to stop seeing "How do you want to open this type of link (https)?.»

  I have my computer (quad core, 6 GB, Win8 Pro ram) configured to boot directly into my gmail account. Everything works fine except that I get a message "How do you want to open this type of link (https)?.» I gives me the following options

  1. keep using Google Chrome

  2, Internet Explorer.

  3. find one in the store.

  I click on keep using Google and my gmail opens

  I changed my start page for Google to a site without https and still got the same message.

  So I think this is a message from Ms. How can I remove it?

  Almost a perfect except for one answer misspelling minor in d. It should read "select the"Google Chrome"and select the option"Set this program as default".

• How do you remove Simulator Test applications?

  I use the BB plugin for Eclipse and have created a few test applications. My 'Office' Simulator now has icons for them and I would like to delete all but one or two. How do I do that? Whenever I have raise the emulator, they are there.

  Thank you.

  Go to the folder of Simulator and

  Delete all *.dmp file

  Delete all the files (* .cod, * .debug, * .jar, *.cso, *.csl) related to the applications that you want to remove.

• How do you improve on the 6 new iOS iPhone 9.1 to 9.2?

  How you upgrade the iOS on the new IPhone from 9.1 to 9.2 6? I can't synchronize my old phone using iCloud because he has a new version of the iOS the new phone.

  Set up as a new phone (no), upgrade to iOS 9.2, then restore it from a backup of the old phone.

• drive DVD/cd that came with the computer failed. you want to install two new dvd/cd players.

  Pavilion p7-1054 pc, windows 7.  I installed a new dvd/cd drive (hp dvd1260i).  works perfectly.  you want to install a second drive of cd in expansion Bay.  I don't see sata cables extra or riders on the new dvd/cd drive (hp dvd1260i).

  a power cable.  everything works fine. thenk you very much.

• How do you want to give visibility to your campaigns to feed?

  Breath of email, I never really liked you and your poor performance, but I do not envy how it was easy to communicate to the team expanded internally.

  "We are launching an - nay, epic - heroic email that will go to tens - (hundreds?) thousands of people, in this day, and that's where the creative element. »

  "What is marketing do? Who has not heard of that? I hear it a lot to feed. "Why, we're busy, developing exciting programs complex, iterative, multi-step triggered behavior of the user, of course".

  There is a terrible analogy, but campaigns to feed a colleague compared to car accidents - they happen every day, but do not have national news. Explosions? Page completely.

  You have this problem of visibility to your campaigns to feed? How did you resolve?

  Hi Mark, what I always did and it has worked, is to transform my super automated and full of measures promoting the campaign.

  in a 3-column table:

  day 1 - teaching email - overview email link

  day 10 - Webinar - preview e-mail invitation link

  Day 18 - white paper - overview e-mail email link

  etc...

  And in another section/slide, I also add:

  -Objective

  -Segmentation description

  -The descriptions of rules (for example if the contact changes to the 'client', the lead will close)

  -Total

  I share this information with the teams involved, and then add a link in the CRM where people can access to see the email being marketing campaigns (link can lead to a wiki space or another tool that your business uses to share documents).

  Finally, in order to support and promote the campaign, I also advertise in our social network society and I publish weekly results.

• How can I start fresh with a new iPhone?

  I buy a new iPhone 6 s more and right now, I have a 5s iPhone which is connected to my mac computer (with an apple ID, iPhoto, iTunes account and icloud). I want to start over with my new phone and remove my apple id, Icloud, iTunes, iPhoto and create a new ID apple and everything for my new phone, but I don't know how to do this. I don't know where to start or how to get rid of my iCloud emails that are signed on my computer, my iTunes, my iPhoto and my apple ID. I want to create an apple id and everything for my new phone so that I can start over and keep my phone new and clean, but I afraid to plug it into my mac when the phone arrives because I fear that all my old stuff from my iPhone 5s will sink on my iPhone more than 6 s.

  You can certainly create an Apple ID

  Right on the head here to create a

  Once you have configured your phone with the new ID - even if you sync with your Mac, it will create a separate etc. backup file and not sync things from the prior ID on the new phone

  We have several Apple ID in our House and the MBP keeps all their back up and content separate.

  Regarding the removal of the existing code - I would just ask that you think that it - like all your purchased music, movies, applications etc are related to this ID and once you remove them - you will pay for all non-free content that you want to access it again - but - still - your choice...

  (1098)

• How do you build so test cases when a new class is added it automatically gets tested?

  I am trying to develop a system for test cases so that whenever a test case is added to a particular package it is automatically included in the trial without having to manually add this particular test case.  What is the best way to achieve this?  Should I use the java reflection?

  Please excuse me if theres an obvious solution to this.  I'm just started with Jenkins and trying to set up selenium test cases.

  Maven knows default JUnit. Just to add a dependency to JUnit to your pom.xml.

  Maven expects PROJECTROOT/main/test/java Tests and runs all tests that are subclasses of unit test (JUnit3) or anontated methods with @Test.

  Good bye

  DPT

• How do you want more to get a wifi card that does not work to activate an external work on an HP laptop?

  I was told by Best Buy my laptop needed a new wifi card or I could buy an external.  I did it and it does not connect to the internet.  It is also said that it does not find my IP address.  It is a 3 years old Vista & I need for her grandchildren do homework in their rooms.  I'd appreciate any help that my check WILL not go very far and it seems that the replacement, I bought wants $25. to give me a help of online support.

  Hello

  1. What is the number of brand and model of the card Wifi network?

  2. What is the full and exact error message?

  3. were there any changes or updates made on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you to return the item and check if it helps.

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  See also:

  5 steps: how to set up your network wireless home

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

  Method 3:

  Read the articles and check if it works.

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

• How do you want to re - start CF Admin? / Service stopped, re - will not start

  CF Admin suddenly stopped and not re - start.  Using CF9 on Win7 / x 64 for months with no problems.  Trying to install an of Teradata JDBC driver.  After you have copied the .jar file in the C:\ColdFusion9\lib folder, I went into Services and tried to STOP and RESTART the Cold Fusion application server.  While Windows has tried to stop the service, got an error that it was impossible to stop the service, and he locked himself.  Impossible to stop or start the service.

  After re-boot PC, Services showed all CF services began normally, but can't run CF Admin and cannot access sources of data or everything. CFM programs.  It seems to be stuck.  I tried to stop and to restart all services of ColdFusion, which stopped and handed over to market very well, but still get error when you try to run CF Admin.  Seems that something is charged is stuck.  Appreciate any advice on how to get the service restarted.  Cannot run any. CFM as all DSN programs are not available.  Here is the error message when you try to access the CF Admin:

  Error occurred while processing request

  The service of the data source is not available.

  This exception is usually caused by the failure to start service. Check the configuration of your server.

  The error occurred in Application.cfm: line 88

  Called from Application.cfm: line 76

  Called from Application.cfm: line 4

  Called from Application.cfm: line 1

  -1: cannot display the location of the error in a CFML template.

  Thank you

  Gary

  Thank you for taking the time to answer.  In fact, thanks to some Google-ing, was able to find and correct the problem.  The problem started when I tried to install and check one of Teradata JDBC driver.  When I tried to stop and restart the service, he shuts down.  Then would start again.

  I discovered the SERVER. JOURNAL file should tell you exactly what is wrong, and he did.  He showed an invalid character in 4 places in the file of neo - datasource.xml (in the C:\ColdFusion9\lib folder).  So my options were to remove invalid characters, or replace the file neo - datasource.xml with the last good backup of work.

  When this file is corrupted, the. BAK version is used, and then he'll corrupt when you attempt to stop - resume service, and you end up with no backup (.) BAK file). Fortunately, I had an another working version of the file on another computer (even configured like this).  So I copied on my computer and I replaced the bad, then restarted (could have stopped and restarted the service, but has decided to re-start, that does the same thing).

  The CF Admin started normally.  I was then able to install correctly the of Teradata JDBC driver.  The cause of the problem was that I didn't have to also register the tdgssconfig.jar file in the section of the FMV of CF Admin (even if the instructions that I told the class driver 4 did not require this file, and that the CF he would not know).  But apparently it is necessary.

  In any case, after all this, the drivers JDBC Teradata successfully verified.  My test of CF server is now more the connection with the data warehouse of company in Houston, more than 1,000 miles away, using the newly installed JDBC drivers.  Queries and and. CFM files work normally.  Thank God.

  Anyway, thanks again for the reply.  Very much appreciated.  If someone has a problem to CF Admin to start, after tinkering with the installation of new DSNs, remember to ALWAYS MAKE a BACKUP of your file of neo - datasource.xml, before starting.  Better safe than sorry.  Kind regards

  Gary

• LR 2.6or7 and LR3 on same machine? You want to test.

  I would like to see if my setup will have problems reported here. Can I install BOTH programs? (Which would add LR3 for existing facility of 2.6). I really just started using LR2.x earlier, but I want to try LR3 with images off-production. I don't have a separate test computer.

  Win7 64-bit Home Premium

  6Gigs of RAM

  I7 - 920

  nVidia GTS250 w1Gig VRAM card

  JBOD storage

  Other users have problems of recovery, but there must be many machines without any problem. If I can't test I put the box on the shelf for now without having to install.

  Jonathan

  I get a "debate" with this issue, but nothing is returned for the search strings I tried...

  Jonathan,

  I did the exact thing that you offer since v3 came.  I'm having some problem of performance so wait 3.1 or 3.2 to start using the new features.  I didn't want to not all crossing - so I didn't convert the v2 catalog when you first start v3.  I had v3 start a new empty catalog.  Then I copied a few directories of images in a new article on my hard drive for LR3 test (several thousands of images with multiple installations of lighting/noise) and reopening lr3, I imported in place in the new catalogue v3.  In doing so, I don't have to worry about accidentally doing a Ctrl-S in images that would be considered by both versions.

  Once I'm done trial v3.1 (I hope) or v3.2 and I'm ready to convert, I remove the new catalogue v3 and the operating system start the old catalog v2 'by' LR3.  This will start the process of converting the old catalog at this time here.  In the meantime, I'll just make the production activities on my v2.

  Everything looks good to me for v3, but the loss of performance in the removal (almost useless) cash tool requires me to wait awhile.  It is not a power issue in my case, maybe video, perhaps a necessity for rendering optimization, perhaps something else.  Time will tell - they'll understand eventually (remember the early versions of the local adjustment tools...).

  Jeff