How do you would remove each item 6 (or Nth) in a table?
Thanks to altenbach (see http://forums.ni.com/t5/LabVIEW/How-can-I-restructure-an-unfavourable-2D-array-format-to-1D/m-p/2463... I managed to organize my 2D table data in a column of 1 d. Unfortunately, the format of the data files is delimited by tabs, which wouldn't be a problem, except there is an additional tab on the end of each line, generating a zero for each element 6 in the column. After have reshaped the original 2D table in a table 1 d, how can I delete all those zeros? Attached is an example of a data file of 2D data of origin for a measure and the corrected version of 1 d, I managed to generate all the data; Also a header and a footer, note the raw data has 2D file that I was able to retire...
apg504 wrote:
Unfortunately, the format of the data files is delimited by tabs, which wouldn't be a problem, except there is an additional tab on the end of each line, generating a zero for each element 6 in the column. After have reshaped the original 2D table in a table 1 d, how can I delete all those zeros?
Well, the order of operations is important here. What happens if you just delete the last column of the table before redesign?
Tags: NI Software
Similar Questions
-
How did you would return an ImageView along its vertical axis?
Hello
How did you would return an ImageView along its vertical axis? It would help me to reduce the number of image files, that I need in my project.
Thank you
JoseApply a transformation of rotation of 180 degrees on its lower left corner followed by a translate directly by the width of the image.
See http://jewelsea.wordpress.com/2011/11/16/rotation-transform-example/ for a code pointer (not exactly what you need but I hope it will help you understand how to achieve what you want).
-
Use of the BAT file - how do you completely remove 150 phones and their associated DNs?
How do you remove completely 150 phones and their associated DNs? All phones are in the same pool of device. I prefer the way bat.
The CUCM version: 8.6.2
Type of phones: 7962 phones - associated with the same device pool.
Other questions: is there a way to remove all phones and their associated DNs with elegance when all phones are associated with the same mass of device? I rather not work with extensions and MAC addresses.
Thank you
Hug Lupas
Hello hug,
Using the BAT, it will take 2 - passes. 1 for unassigned phones and 1 for "DN". This is well illustrated in the attached doc;
http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/bat/8_0_1/bat-80...
Of course for the DN you could remove through the road map report > unassigned DN > select all > delete
See you soon!
SoC
-
How you would remove this background?
I have a second 2 clip that has a lot of movement and a pan directly on a handheld. Unfortunately, you will see that we have taken a few glances in the background. I'm looking for suggestions on how to address this problem because I'm not sure of the best way o take... I have rotobrushed actors, but stopped there. Thank you.
I did a bunch of times over the past 20 years, and the technique is always the same. Take some pictures of the video to create a clean plate, roto your subject properly separated from the background, the camera moves track (should not be confused with Camera Tracking) are followed on the clean plate, use a feathered mask to hide the seams, then put your subject in front of the clean plate and compensate for motion blur.
Here are the details. I guess that you intentionally blurred out, or is this blur? If it's fuzzy then I'd find a picture of your video where people in the background are on the right side of the frame that has the least amount of movement bur, export the image to Photoshop, find another framework where people in the background are on the right side of the screen with the least amount of motion blur, of export that frame in Photoshop , and then use the exported two frames to create a bottom plate which is wide enough to cover the pot by matching details, then clone or paint on the people and the actor.
In AE, import background "clean plate" you come in fact and put over a copy of your original film on the bottom layer. Your actor Rotobrushed should be on the top layer. Turn off the top layer, find the place where you can match to the top of the own plate you created in Photoshop with the shot, then creates a feathered mask to hide the edges. The value of certain markers on the clean plate and the original video.
Now follow the original video using position and rotation, add a null value to the timeline and apply tracking to null information, move the markers you set and parent the clean to null plate. Activate the directional blur on the clean plate and adjust the parameters of the model on the Advanced tab to match motion blur, of the original video. You will perhaps enable CC force motion Blur on the own and the original plate to match the two shots, so that the result is a clean plate perfect with no actors and no people in the background.
Now just turn on your actor layer and ensure that the blur of movement on the actor corresponds to the rest of the shooting.
A little tedious, but the simplest I know to make your request and do works perfectly.
You can also use the Mocha or Mocha pro to create your own plate. (or SynthEyes... or a lot of other solutions) but if there is significant detail in your shot you can follow and you can composite a clean plate in Photoshop and AE, then will do very well.
If your picture is held in the hand and as you move towards the actor there is then other problems creating a clean due to the perspective change plate so the procedure is more difficult and may require a lot more work to correct changes to the Parallax of a mobile camera, but the technique is basically the same create a clean plate with actors and distractions removed, then add only the actors.
-
How do you insert/remove the HDD in the T5500?
I want to remove and put back in a hard drive. I don't know how many screws and which screws to remove to do.
I can't remove the screws more that I need to. And I see that maybe if I unscrewed the wrong screw then black Assembly will detach the metal grame.
http://i.imgur.com/Yd70pVl.jpg
In the photo below, see two screws on top that are fairly close together. I let them ' cos I think they can join the Assembly and I don't want to unscrew the Assembly - the brackets that hold the hard drive, I don't have to
And to the bottom of the image, you see two screws unscrewed, but the one I found that I could not even remove the hard disk. And there is a little black thing between them that looks like a screw, but is not.
I guess I could remove all 4 screws, but then the Assembly could come off. For now, I just want to remove the hard drive.
http://i.imgur.com/65fGtgv.jpg
The album came out without removing ONE screw.
Lift the blue ejector arm and the drive is kindof pryed out.
The ejector arms have a PIN that goes into the screw holes to hold the reader in. Once you raise the Lock ejector you lift a little far and out on this side. The other side has fixed pins.
-
How do you add / remove or images in a collection in Lightroom?
Sometimes, the simplest things are not well documented or documented quite easily.
I created a new standard collection, which is empty and I would like to add pictures selected for this collection. I can't find the way to do that in LR Classroom In A Book or in the help. Please help me with the best way to add individual images that I put in evidence, or selection of images that I marked with a color designation. I would also like to be able to delete images at random this collection, therefore also need to know the best way to do.
I tried to do a right click on the collection of research as well as the menus without result.
TIA,
Ken
To add to a collection: select images in the grid, and then pointing the mouse on the picture itslef and drag in the collection
To remove a collection: select the picture in the collection, and then press Delete on your keyboard
-
It is a repost to seek expert assistance from HP last week.
Product: hp 3210xi printer.
Operating system: Vista 64-bit.
Errors: Several, especially related to the missing .msi TrayApp, status and DocProc files. Some of them are on other Windows logon are call center solutions HP or by selecting the scan function.
Changes: Do not change when the errors using the started HP Solution Center, probably after an update or install, but could not have used quite close to associate the change. Print function has always worked without error and the analysis function is used less frequently. Have tried repeatedly during the uninstalling and reinstalling. Have used the System Mechanic to try to erase the registry HP errors reported. Have seen some HP Solution Center errors before but have always been able to reinstall to remove.
Problem: Cannot connect to Windows without error. Cannot start HP Solution Center without errors. The HP solutions Center opens and functions, but the text is missing. Can't scan from the center of solutions without errors, but tests eventually work.
Hi JohnZNC,
There are a set of "scrubbers" that appear in your installation directory, which can carry out varying amounts of clean-ups/uninstall.
The deepest is a "uninstall L4' and and is launched by exectuing the 'Uninstall_L4_64.bat' file (double click should suffice).
These files are in the subdirectory '\util\ccc', is usually found in c:\program Imaging\ of Hewlett-Packard...
Find the "Uninstall_L4_64.bat" file, then double-click on it to get the course of cleaning.
Hope this helps
-
How did you would slice this provision?
I'm new to Fireworks and I don't know where to start cutting this layout in css and images. Is there a good tutorials?
Any help is greatly appreciated,
Michal
Size: http://driverlawfirm.com/draft6.png
It's not necessary, I suggested that, so that you can be sure to cut the shadow effect everything. You don't have to open another document. Right-click of your rectangle and add a slice of rectangle on that to be sure where are its edges.
-
I created a table with two rows. I would like the text in the top line is centered and the text in the line below that is aligned to the left. I have no problem when no list (chips) are involved. However, this week, the client has a list of items that have bullets.
My problems are:
1. the second row of my mimics table my top row despite not correctly displayed in design mode.
2. when I try to clear my list of left fleas disappear.
Please help if you can.
Here is the link problem: 2015 Spelman women of color Conference
Here are the previous explosion without the bullets/problem: 2015 Spelman women of color Conference
Some days I think I understand the basics of HTML, but obviously not on this one. Whenever I try to search, then hard to pull the code to solve this problem, I fail miserably.
Here is the code for the problem table:
< b >
< td width = "296" align = "left" valign = "top" bgcolor = "#F5F5F5" > < table >
< td width = "269" align = "left" valign = "top" bgcolor = "#F5F5F5" > < table >
< /tr >
< b >
< td colspan = "2" align = "left" valign = "top" bgcolor = "#F5F5F5" > < table width = "500" border = "0" align = "center" cellpadding = "0" cellspacing = "0" >
< b >
< td align = "center" class = "alegreyasc" > Top 3 reasons to attend the < br / >
Spelman College 11th Annual Leadership and Women of Color Conference: new principals in the era digital < table >
< /tr >
< b >
< td align = "left" valign = "top" class = "alegreyasc1" > < ul >
< li > < span class = "alegreyasans" > learn how to use the technology in many aspects of your life, including the design of career strategies, balancing work/life, community and promoting civic participation skills.
• </span > < /li >
< li > < span class = "alegreyasans" > learn more about the importance of diversity in the digital space and its impact on innovation. </span > < /li >
< li > < span class = "alegreyasans" > identify and examine the skills required and directors of schools new platforms use to build and maintain the success. </span > < /li >
< /ul > < table >
< /tr >
< / table > < table >
< /tr >
OK - let's try this-
-Replace
table of .mainbox table tr td table tr td tr td {}
text-align: center;
do-family: 'Alegreya SC', serif;
}
with this--
table of .mainbox table tr td table tr td tr td {}
do-family: 'Alegreya SC', serif;
}
and this-
{.alegreyasans}
do-family: ' ' Alegreya without, without serif.
color: #666;
do-size: 16px;
text-align: left;
list-style-position: inside;
list-style-type: disc;
}
with this--
{.alegreyasans}
do-family: ' ' Alegreya without, without serif.
color: #666;
do-size: 16px;
text-align: left;
list-style-type: disc;
}
Works now?
-
How do you manage the layers and objects and to rear of the other
I do not understand how it is possible to have many objects on the stage and be able to handle the motion tweens with each of them, but ALSO to manage the objects are in front and behind them. I have a boot animation and there are many ongoing action, and there are times where I need my guys to be in front of the objects, and the time when they need to be behind.
I do not know how to handle things regarding the layers and the movements in a way so I can get the items in the order that I need them to be (as the element on which passes in front of the other).
Someone at - it advice or a way that I can manage my objects and queries and be able to classify them on the stage so that I can arrange things how I need them to be investment and who should be in front of the other objects?
Yes, if you want to animate 20 items, you must put each item in its own layer. There are a number of ways to make it a little less tedious. For example, if you place each element on the stage, in the same layer, and then name each instance, you can then select all the elements on the stage and then select the Edit menu and then the timeline and finally distribute to layers. This will place each item in a layer newly created at the same position on the stage and then name each layer to match the name of instance for this element.
To change the Z-order of any given scene element, you can use a number of different methods. One method is to use Actionscript as I mentioned in my last post. ActionScript is the best method if you need to be able to respond to user input and show the changes that cannot be built in animation since the beginning. If you're just showing an animation preset, you can use a number of methods different timeline based.
In your example, if you want to have a figure to move another object on the stage, you can do that by creating two layers of the same object. One on one with the figure between the two. So that you have the object to move around both in front and behind, the figure. When you want to display the number in front of the object, set the object in the layer that is on top is not not visible. Then you will see only the object that is at the origin and the figure in front of him. How you go about changing the visible property or the alpha property, of this object. You can use keyframes in the timeline panel or the simple ActionScript.
You want to find a small pool in the basics of Flash or take a book to guide you. There are a number of very good tutorials on the basic available free animation: http://www.gotoandlearn.com, or at a cost: http://www.lynda.com .
-
How can I remove photos one at a time quickly without the pop 'are you sure' upward each time?
When you remove the photos I like to watch each individually in full screen and press the delete key. I'm doing this because I take a lot of photos of the scene and I would like to confirm that I am removing those unclear and want to do it quickly. This seems more possible pictures without getting the "are you sure" pop-up that significantly slows down the process when weeding through my images. I am using Photos 1. 0.1 with OS X Version 10.10.5 Yosemite
Thank you!
I recommend the upgrade to OS X to 10.11.3 (El Capitan), which has a more recent version of Photos inside. If you don't want to do then that propose to move this thread to the Photos for Mac forum? If you would like to do, please let us know and we can ask that it be moved.
-
How do subtract you different values for items in a specific table?
Hi LabVIEW community.
I am new to LabVIEW and Im working on my first application. One of my challenges I have problems is to know how to avoid specific values of some elements in a table.
My application is to measure the distance between sensor and magnet, however the initial distance for each magnet sensor is different. I have converted the tension up to a distance using the Math node for each element and now need to correct these values by subtracting their initial value.
The source is a table 1 d of DBL64 composed of 32 elements and each of these values must have a different value subtracted.
for example:
Element 1 - 5.557
element 2 - 2.34
3-7 654 element and so on
I tried to separate them (index table) and subtract the values of each item and then combine them again. This was not effetive. I need to write these values in a .txt file and also to use them in another calculation.
I have attached my attempted under VI.
Any advice would really be apprecieated.
You don't need to look it. There is a very simple method. Generate a table that contains all your desired offsets. Then he subtract off the coast.
This is the VI even with this change:
-
How do you find the current value of each sample when collecting a finite number of samples
My program works with an external clock with no constant pulse intervals and acquires a value of voltage on the front of these impulses. Is there anyway to get the value of the voltage at each pulse without having to wait until all samples are taken. I would Normal 0 false false false MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 cm 0 cm 5.4pt 5.4pt; mso-para-margin: 0 cm; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman"; mso-ansi-language: #0400; mso-fareast-language: #0400; mso-bidi-language: #0400 ;} programmatically raises an event when the voltage reaches a certain level during the scan if so why I need to constantly monitor the voltage. "}
Any help would be great
Hi JED1986
I have two solutions for you, for your problem.
The first idea I would recommend creates the code below:
Remembeer to define the sources correctly, including the clock to read source as your external clock. The above code will be permanently read 1 single sample with a rising edge, write to the disk, clear and will continue to read the following sample.
Another way to proceed is to use an express VI and set the mode of acquisition as ' on demand ' with 1 sample currently playing. This is illustrated below and highlighted in red:
I hope this helps. Please let me know how you go.
-
Yoga 11 s how do you remove Mcafee?
There is a lot of garbage I want to remove a new yoga 11 s. One of them is Mcafee. I spent over an hour trying to figure out how to remove it and really resent Lenovo dumping these programs on my machine.
Normally, you would go to uninstall in Control Panel to remove a program, but it is not listed in there for some reason any.
Can someone help, please?
It wasn't on the list. However, I have run mcpr.exe and removed it. Thanks anyway.
-
How do you remove Trojan horse from the Windows\system\svchost.exe file located? I worked on this problem for 5 days. I've tried everything except wipe the hard drive completely and starting over. Windows xp pro sp3
I bought a new diagnosis program and quarantined the virus once it has been identified. I tried to remove the virus in several ways, but it comes back. The best way that I thought would work enter safe mode and by changing the attributes of the svchost.exe file and then delete and checked the registry AWI hwo to the Web site, but it continues to be problematic.
Hello
During the uninstallation of antivirus/antispyware/security programs always check for an uninstall
tool and/or removal instructions special to avoid leftovers.List of tools to clean/uninstall anti-malware programs
http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91Uninstallers (removal tools) for common antivirus software
http://KB.eset.com/esetkb/index?page=content&ID=SOLN146
------------------------------Here's what I use and recommend: (these are all free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leave the file system, Web,.
Operational network (Script and behavior are also recommended in Ver 6 +).Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Two versions of Avast are available 6.x and 4.8 x
Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadAvast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
Finish those you don't use).
http://www.avast.com/free-antivirus-download#TAB4Or use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp?prevx=Y<-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.
http://www.Malwarebytes.org/products/malwarebytes_freeI hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Maybe you are looking for
-
I read your instructions on the Firefox Web site. What is not clear to me is, I have to do 'privacy settings' and ' browsing history delete "within the web site of Firefox or do I have to do this offline via Windows 7"internet settings ". The Firefox
-
After upgrading to Windows XP no sound on Satellite P200 - 1 K 5
* I have a few problems with the audio driver for TOSHIBA Satellite P200 - 1 K 5 with WinXP SPII downgrade.* Material _Audio: _Sound: Realtek High Definition Audio DriverSystem: Microsoft UAA for High Definition Audio Bus driver _OS: _SATA driver onl
-
Playing games downloaded on XP Pro
Downloaded games freezes and the mouse does not work when you use XP Pro. The mouse will perform all the other functions and work on other computers. Games and the mouse works on the other conputers with XP, XP Pro, and windows 7.
-
HP6600: Clean print heads
Every inkjet printer, I have never had provides a utility to "clean the print heads" what weird colors appear in printed documents. It doesn't seem to be something like that with your device and everything will out "a bit greenish". Then... How can I
-
The receiver receiving multiple copies of emails from the sender when one e-mail is sent
Original title: several emails After receiving an email from a friend, I forwarded to others in the same group of interest. When they get them, some have asked why I send 9 copies of the same message, which I did of course. Then, when some tried to o