How fade in / Fade out bitmap image?

Similar Questions

• How can I clean the Bitmap Images imported

  Hi, I am using Flash 5. I have imported a .png image sequence and they look pretty rough and bitmap so I wanted to clean them.

  1. what I have to select each frame after import and adjust the settings of the bitmap for each image or I can doo this somewhere so it affects al images?

  2. I can't find the settings to clean up the bitmaps. I thought they would be in the Panel "Properties"?

  3. is it possible to set the pixelation or clean a .swf imported or is it better to clean the sequence before you save it as a .swf?

  Ideally, you should have images cleaned / correctly size / optimised before import you them into Flash.  Once they are in Flash, one thing that you can do that can help how the image appears, especially if manipulate you its size in Flash, is to set the image to allow smoothing.  This can be set using code or can be applied manually to the image in the library do a right-click, selecting Properties and by checking the option to allow smoothing.

• Anyone know how to "cone" and "fade out", a rule (online tool) at each end? Thanks in advance!

  Anyone know how to "cone" and "fade out", a rule (online tool) at each end? Thanks in advance!

  Use features of variable width.

• How can I create a fade in/fade out master for a sequence?

  How can I create a fade in/fade out master for a sequence?

  I'm totally new for the first...

  In Final Cut 7 I can take a whole sequence and create a 'nest' out of it, where it becomes an editable object in the timeline panel. I can only apply a fade to the whole sequence, even if there are several clips with transparency immediately above. I can also apply a video effect 'broadcast safe' to make sure that my video is all legal. How to do something similar in the first?

  Thank you!

  -Kurt Cowling

  Nest sequences

  Broadcast colors effect

• How to backup settings fade in and fade out?

  When I click on the fade in and fade-out buttons for the music on the soundtrack, it works for a while, and then he disappears from the track.  It happens when I apply also the smartfix on the track so it lowers the music when the narration or audio plays on the video.  How can I get the fade in and fade-out configuration to be saved?

  As well as questions of Steve, you can Keyframe the Volume of the Clip to create manually the bland-In/Fade-Out?

  This ARTICLE will give you advice on that.

  For some tips on getting the computer set up for video editing, review this Checklist and the various links included. [Thanks to Neale for providing most of these materials and for his editing work!]

  Good luck

  Hunt

• How to fade out selected area not to 0 in the Waveform Editor

  I remembered that CS3 hearing had effect "fade out to...". "but now I work in hearing CC 2015.1 and there is no effect"fade out specific value "... I only work in waveform mode, so please could you suggest any solution it?

  You use the effects > Amplitude and Compression > Fade envelope and choose the preset "smooth fade out. This will place a yellow line on the part of your selected waveform. What you can do now is to click on the yellow line to add keyframes and drag them around no matter what level you want to fade to stop (the values are shown on the display). You can record what your own preset if you will use it often.

• fade out for awhile

  I have 12 items and 8.1 of Windows 64.

  I like to fade out the sound in the middle of a clip for a short time. After that, I will return to the normal level. How can I do these things?

  Koolmees37

  I'll make a detour in the methodology to see if the keyframes to the stretching of the audio will be easier. If this isn't the case, we return to my first choice the mixer Audio Panel for the task.

  In this demo, I have my audio on the Audio track 1 and selected / highlighted.

  1. place the timeline indicator to the place on the timeline 20 seconds before where you want the Fade Out to start. Click on the diamond under Audio 1 (name of track). Which will put a white dot on the orange line running horizontally through the clip. This orange band is called rubberband. You have just placed a keyframe Volume. The level of Volume to this place will be 0 dB (normal Volume of the clip).

  2. move the timeline indicator 20 seconds later on the timeline. Click on the diamond under Audio 1 (name of track). Which will put a white dot on the orange line (elastic). With the cursor of your mouse, click and drag this second white point down at that time that spot down. You just put a Volume key image and don't give it a no sound (-infniity). The slope between's first and second key frames will give you this Fade Out effect. You can refine the Fade Out by moving the white dots around with your mouse cursor.

  3. then move the timeline indicator to the right where you want the Volume to Fade in. click the diamond under Audio 1 (name of track). This will place a white dot on the orange line (elastic). Another Volume keyframe (that third white equips that you see in the screenshot). Because we do not have it upward, the Volume, there is - infinite (no sound). Now the timeline indicator 20 seconds before this place. Click on the diamond under Audio 1 (name of track). This will place another white point on the orange line (elastic). For this white point with the mouse click on drag upward at that time here spot the normal Volume level (try 0 DB or very near it).

  In the end, the audio clip of retouching and its volume of keyframes (white dots) will look like this

  

  That help and give good results or the time to go back to the Audio Mixer whose description I gave in a previous post?

  Looking forward to your results.

  Thank you.

  RTA

• fade in fade out photos

  Hello

  I am eager to get this effect:

  http://www.affinityplanning.com/

  in my photos. I want ab

  the 10 images fade and fade out after about 3 seconds.

  How can I do this?

  You just need a very basic images jQuery cycle

  http://www.malsup.com/jQuery/cycle/Basic.html

  Are you familiar with the work in the code at all?

  The one above is popular and incredibly easy to implement on a website.

  If you look at the page in "view source", you will see this:

  http://cloud.github.com/downloads/malsup/cycle/beach1.jpg"width ="200"height ="200"/ >

  http://cloud.github.com/downloads/malsup/cycle/beach2.jpg"width ="200"height ="200"/ >

  http://cloud.github.com/downloads/malsup/cycle/BEACH3.jpg"width ="200"height ="200"/ >

  http://cloud.github.com/downloads/malsup/cycle/beach4.jpg"width ="200"height ="200"/ >

  http://cloud.github.com/downloads/malsup/cycle/beach5.jpg"width ="200"height ="200"/ >

  The parts that you must include in your page are the links to the two jQuery scripot that create the effect: these are thesection of your page.

  AND the slide show

  -It is placed on the page where you want the discoloration to show images. Replace the images below with your images.

  http://cloud.github.com/downloads/malsup/cycle/beach1.jpg"width ="200"height ="200"/ >

  http://cloud.github.com/downloads/malsup/cycle/beach2.jpg"width ="200"height ="200"/ >

  http://cloud.github.com/downloads/malsup/cycle/BEACH3.jpg"width ="200"height ="200"/ >

  http://cloud.github.com/downloads/malsup/cycle/beach4.jpg"width ="200"height ="200"/ >

  http://cloud.github.com/downloads/malsup/cycle/beach5.jpg"width ="200"height ="200"/ >

  MORE css for slide show

  (this will in the)section of your page. (Change the width and height to the same as YOUR images)

  It's her!

• Interactive - Fade In / Fade Out

  I'm working on the creation of an interactive map. When a button is clicked, a circle graphic fades. When we click the button I want the graphics to disappear in the same way. I can only figure out how to make the chart disappear instantly instead of gradual.

  I'm a tutorial and change for my needs. The tutorial can be seen here: http://flashexplained.com/design/making-an-interactive-country-map/

  The steps for the animation start at step 8.

  Here is the code I use:

  button_btn.onPress = function() {}

  If (popDensity._visible == false) {}

  popDensity._visible = true;

  popDensity.play ();

  } else {}

  popDensity._visible = false;

  popDensity.gotoAndStop (1);

  }

  }

  I am using Flash CS3 and Action Script 2.0.

  I would also like to have the image of the circle have a little picture pop up by it when the mouse passes over it. What am I looking to get something like that? I couldn't find anything similar to this.

  Thanks for any help you may have.

  If you used a timeline Tween gradually make the object appear, then you can make one that relies on the end of it which makes it fade out.  You say that she can play again.  If you won't necessarily _visible for the button code more.  In your animation, you can use

  in frame 1 of the animation

  Stop();

  This ._visible = false;

  in box 2

  This ._visible = true;

  the framework where it is completely gone in

  Stop();

  and your button code...

  button_btn.onPress = function() {}

  popDensity.play ();

  }

  If the object starts with invisible session stopped at frame 1, you click on the button and animation games, turning visible in box 2 and fading until it stops when it is completely visible.  You click again on the button and it plays to fade, a loop back to stop at frame 1 and turn invisible.  There are other approaches, then maybe you can think of something else you were going.

  You are really not need make the object visible/invisible with this approach because it is not used as part of the control logic.

• Fade in an image

  How can I melted in an image in a project from imovie (11)?

  For music, it is simple and clear, but I can't find how to do it with a videoframe.

  I see not fade to black, but not fade to black.

  iMovie 11: Add transitions between video clips

• Fade out effect when you change screens

  Hello world

  I have a screen (the sheet object) with some objects (labels, imageButton, etc.) and I need to change its background of fadeing effect, and if it is possible do not change objects.

  One of the ways I see to create a new page with the same elements, but I couldn't find how to change an effect that will use the system of switching screens.

  All advice?

  You can use a docklayout for this. Place a container at the bottom with the desired backgroundcolor. Put from another container on top of that with the controls of your choice. After that, you can disappear or fade in the container with backgroundcolor as you want by changing the opacity. In your case, you must use an explicit animation (https://developer.blackberry.com/cascades/documentation/ui/animations/explicit_animations.html). Fade out background, when the signal that the background is dimmed, change the background color and fade in.

• Fade, wait a second and then fade out.

  I'm developing an application ActionSript 3 for Playbook.

  I use Tweener class fade and fade out a Sprite.

  I want to do an effect as I say in the subject, but I don't know how to wait a second after having melted and melted on.

  Any advice?

  There are a few things you could do:

  (I'm not suggesting this one first as the two interpolations can overwrite each other)

  Tweener.addTween( myMovieClip, { alpha:1, time:0.5 } );
  Tweener.addTween( myMovieClip, { alpha:0, time:0.5, delay:1.5 } );
  

  Or you could make the initial appearance, and then use a parameter onComplete to initiate another method to falter to the object.

  Tweener.addTween( myMovieClip, { alpha:1, time:0.5, onComplete:on_complete_method } );
  
  function on_complete_method():void
  {
       Tweener.addTween( myMovieClip, { alpha:0, time:0.5, delay:1 } );
  }
  

  There is more information here:

  http://hosted.Zeh.com.br/Tweener/docs/en-us/

  I hope this helped a little

• How to change the bitmap image in blackberry

  Hello

  1. work on the version of BB storm (9500/9530 Simulator) is v4.7.0.75
  2 opportunity BB JDE 4.7
  3. the request is:

  I display a bitmap image by using the drawBitmap method. now I want to select a portion of the bitmap, and then I need to cut & paste the part somewhere in the screen (MSPaint we have option 'Select').

  is there any method that will make the similar operation (or) any idea to accomplish this in blackberry.

  Thank you

  Sendhil Kumar V

  Take a look at this thread and refers to the J2ME code:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=24929

  The 'trick' is getARGB() and setARGB().  As long as you check out relevant Bitmap Moose ARGB values, you should be able to create a new Bitmap.  That said, I never did.  Let us know how you go.

• Fade out - I don't hear it

  I am a beginner. This sounds like a basic question, but for the life of me I can't understand this. I added a Visual fade a clip in a multitrack session, using the Waveform Editor. I see the fade out. I don't hear it. My apologies if this is obvious, I'm having a lot of trouble with that, especially in troubleshooting. Surprised I can't just chatter, considering that I pay monthly for it.

  John, I'm hearing, I'm sorry. It turns out that the fade is there, it was just subtle, so I don't notice it. My apologies, the bland and the other audio settings, take some getting used to and I find than deletion, I'm not happy with is a challenge to understand how - I am a novice. I appreciate your response!

• Tracks that slide and fade out

  I am trying to create an effect similar to what is in the video related to 01:28 Learn how to set boundaries when things get uncomfortable

  I've been so far able to understand how to make the white bar as a title, but I have a problem with the sync. I put it on track 2, but it does not start at the beginning of the title and takes a long time to fade. Then when it receives not finally completely gone it disappears very quickly and I can't extend the deadline.

  Help, please! Anyway!

  Do white in the title, use the pliers movement effects to move the shape on the screen, add a dissolution to fade out. Make the words in titles under a separate title and add it on track v3

  Here is an example of project in CC2014, could give you the general idea.

  Dropbox - title slide.prproj