How fast SATA supports the HPE h8 - 1240t?

Similar Questions

• The upgrade of the HPE H8 - 1240T

  Hello

  I think I have a HPE H8 - 1240t

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&DLC=en&LC=en&product=5193499&

  I was wondering if this PC uses specific parts of HP.  My current PC is a Dell and a few years back I tried to upgrade the video card and found that I need a new power supply for it, but I could not just to the store and choose one.  I need to buy a power supply specifically for a Dell computer.

  I have the same problem with the h8 - 1240t or should I use standard parts?  I will probably want to upgrade to the Radeon HP7570 and the 300W power supply included.

  I could customize the video card and power supply to upgrade now, but I can buy them cheaper elsewhere so I would rather put it on myself.

  Thank you

  Adal

  In AdalH,

  Standard parts.

  The basic unit is a version, if you run the configuartion, when you get to the 3rd hard drive, it says the PSU is in conflict (to 300W).  The basic config seems very under powered.

  Requirements on HD7570 provides 400W.

  http://www.AMD.com/us/products/desktop/graphics/7000/7570/pages/Radeon-7570.aspx#3

  Example only:

  Replace with a Rosewill 630W ($60) and an EVGA GTX550Ti is $ 135. (with refund on card).  The map is 8.25 "long. The GTX550Ti is declared as rerquiring a 400W PSU, but I like the extra available for perhaps a GTX570 $359 when prices go down.

• How fast is Portege R830 SATA controller?

  Hello

  Recently, I started looking for an SSD performance of my laptop.
  How fast is SATA R830 - 3 or 6 Gbps controller?
  Is there a list of supported devices?

  Thank you!

  R.

  Hello

  AFAIK the laptop supports the interface Serial ATA Rev. 2.6.
  According to the news of Wikipedia review SATA 2.x supports 3 Gbps
  http://en.Wikipedia.org/wiki/Serial_ATA

  Greetings

• HP 6470 b 2nd hard drive upgrade. How fast this port works on? SATA I, II or III

  HP 6470 b 2nd hard drive upgrade. How fast this port works on? SATA I, II or III

  I want to put in a 60 GB SSD into the CD slot and want to see how fast it will support as this will be used for the Cache

  Thank you

  The published information is not explicit; He says only: SATA for the expansion Bay while the main hard drive Bay expressly says SATA-III. However, given that this isn't just an optical drive Bay, but also a general 'Bay expansion', it is safe to assume it of on the same SATA bus as main drive and is a SATA III interface.

  Data sheet

  6470b is also supposed to have a slot for a WSSD mSATA, but he is not described in the Manual:

  Manual

  Obviously the WSSD would work better for cache but you can use a 60 gig SSD in an expansion bay for both cache adapter. Even if the connection is SATA-II, it will be much faster to work for a cache of acceleration.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Upgrade of RAM i7 540 how fast can the processor actually use

  I just got a 540 and I want to know how fast RAM i7 processor is able to use to my advantage. The BIOS can deal with setting parameters at a higher speed of RAM?

  Second question, the system tolerates 1.3V RAM?

  Standards JEDEC and Intel Haswell only supports 1600 MHz CL11 at 1.35v

  You can install RAM more fast (probably up to 1866 MHz depending on availability), but it might speed up to 1600 MHz.

  Note that faster RAM installation also slightly increases the temperature of the CPU.

  Don't lose sleep on it, you hardly notice the difference anyway.

  Before I forget, do not install any RAM with a voltage higher than 1.35v.

• expansion slots available in the hpe 1160d h8 h9 pcie, pci how?

  expansion slots available in the hpe 1160d h8 h9 pcie, pci how?

  Hello

  Here it is:

  http://support.HP.com/us-en/document/c03014589#n66

  Kind regards.

• How many ethernet modem ports should have to support the airport Time Capsule

  I have a question: how many ethernet ports if a modem must support the airport Time Capsule?

  One (1)

• How can I down the msn toolbar support for Mozilla firefox?

  My computer crashed and lost the msn toolbar. How can I down the msn toolbar support for Mozilla firefox? Edit

  It was more common to ask how to uninstall these toolbars. I think that it will now be known as a Bing toolbar, but as much as I know it is no longer supported for Firefox. You can find a few unofficial addons with similar features.

  You'd better discuss what anyone more about MSN Forum MSN specialist.

• How long Apple will support the iPad mini 1

  Hello fellow Apple lovers,.

  for my restaurant-bussiness I need 1 or 2 very basic iPads as cash-register using Lightspeed software. There no need again, at the top of the iPad Bill.

  My wholesaler suggested me 2 new iPad mini 1 which is a very affordable option. My question for you and apple is: how much time do you think this model to be supported?

  Thanks in advance for your response!

  Pieter Dijkema

  Apple are not here, these are user forums, you will not get a response from them.

  The first generation iPad Mini supports the latest version of iOS (9.3.1), if it will support the next major release we won't know until Apple announces that it is compatible with (the speculation is not allowed on these forums). As it has only 512 meg RAM (Mini 2 and 3 have 1 gig; Mini 4 a 2 gig) is probably limited to updates of iOS it is likely to support.

• My drop down bookmark does not offer 'manage bookmarks '. Support find Ican, is how to change the bookmarks. How can I find the link manage if this isn't in the menu drop-down?

  Question
  My drop down bookmark does not offer 'manage bookmarks '. All the support I can find that this is how to change the bookmarks. How can I find the link manage if this isn't in the drop-down list?

  In Firefox 4, "Organize bookmarks" was changed to "Show all bookmarks" to open the library window.

• DV7 - 7333cl: how to extract usable data from a bad drive using 22 pins adapter usb to SATA on the new HD

  Greetings HP Forum,

  Recently, I replaced a bad hard drive on my laptop. I need now step by step procedure to extract usable data from the wrong drive using 22 pins adapter usb to SATA on the new HD.

  NOTE: I can't not all data that especially if some of the software downloaded on the replaced disk can be altered. Should I first download Internet Antivirus to protect my new hard drive? I'm not an expert, or even close to this when you work on the back of the laptop, so I'll have to step by step how to download and to partition the data recoverable and software, etc..

  Thanks in advance for your help... I greatly appreciate it!

  See you soon!

  Wes

  It is not complex. Attach the drive to the adapter and connect it to any other computer with good antivirus and antispyware installed. I use Malwarebytes and Avast. When you connect the adapter with the drive connected to the usb port, the drive will appear and it will be assigned a letter maybe E:\ or F:\ or something else. Immediately, he analyzes with the antivirus and anti-spyware. Quarantine or delete any virus or malware it finds. Then, it's just a matter of navigate the disk and copy and paste the contents of the host computer in a directory for this purpose. Obviously, you can copy from documents word, photos, music files, but you cannot copy the applications like Microsoft Word, iTunes. Photoshop.  You may need to take ownership of the files on the old hard drive, but Windows will guide you through this. Don't know what else I can answer.

• How can I fix the Netflix "Sorry, the video is is not supported on this platform." on Sony TV KDL40EX640?

  Netflix has worked, but I get the message "sorry, video is not supported on this platform." now. I have a Play 3 station I spent to watch Netflix movies. The PS3 was supposed to do a software update before he would play movies. How can I get the TV on Internet Netflix movies to replay? Thanks, Larry

  Hello Larry,.

  Welcome to the community of Sony.

  This problem has been resolved and is now available in your TV to Netflix.

  If my post answered your question, please mark it as an "accepted Solution".

• How to extend the range of my Airport Extreme Base Station (802. 11 a, c) using a relay of Airport Express (802.11n).  Airport Utility (V635.2) says that this version does not support the relay.  That is what it is?

  How can I extend the range of my Airport Extreme (802. 11 a, c) using an Airport Express (802.11n) point.  Airport (V635.2) utility does not recognize the Express on its screen?  I have to buy equipment?  I'm on a MacPro OS X 10.10.5.  Thank you.

  AirPort utility that ships with OS X 10.10.5 supports base stations as 802.11ac & 802.11n AirPort. It should be able to configure both of your base stations for a scope (wireless connected base stations) or roaming types (base station connected Ethernet) wireless networks.

  When you initially configure the Wan, it helps to keep the two base stations in the same room. Once configured, you can move the base station that extend to the desired location. The important key is that the final positioning of the station that extends the base must be understood that it's to expand in order to maintain sufficient bandwidth to the station remotely for clients from network connected. Please check the following airport user tip for more details.

• the variant attribute value - how fast it is?

  Hello

  There were days OR presentation on attributes of type variant. There are example saying that variant can be used to remove duplicates from table 1 d and this supposed to be a very quick solution. I did some tests and it seems that is not:

  

  On the other hand the variant is very fast research once all atrubutes are implemented.

  

  My question is how fast is being variant attributes and how this structure variant is allocated and stored in memory.

  Excerpts from VI attached.

  LabVIEW manages memory for you.

  However, if you make too much reallocation of arrays of surfaces, you might run out of contiguous memory and thus running out of memory, memory fragmentation can cause problems.

• How can we support WAV file stream by using the window media services

  How can we support WAV file stream by using the window media services in Windows Server 2008 R2

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer