How I cut myself on the spot

Similar Questions

• How to cut sounds using the Commons of edges?

  Does anyone know how to cut sounds or raise the volume to 0 and save using the http://www.edgedocks.com/edgecommons#anchor_edgecommons_20

  Its a great way to use soundJS on board, but it is a bit incomplete, since it contains only play

  I tried to look in the API for using setMute (true); but I don't get a lot of mistakes in the edge when I try to do

  Anyone know a solve?

  To turn on or off the mute button click - the best way to do is to switch a variable to hold the mute State:

  code on Stage.compositionReady

  isMuted var = false;

  Call this function in your silent btn click event

  sym.onClickMuteBtn = function()

  {

  isMuted =! isMuted; / / Toggle the variable

  createjs. Sound.setMute (isMuted); / / set silent status toggled variable-based

  }

  If you really want to know if the sound is playing, see the documentation for SoundJS in SoundInstance:

  http://www.createjs.com/docs/SoundJS/classes/SoundInstance.html

• How to cut perfectly along the edge of a shape

  I'm cutting perfectly along the edge of the form, while I cut this extra piece on the side. I tried a few complicated ways to do, that do not work. However, I feel like there must be a better way. What would be the easiest way to do something like that?

  

  I would use the pathfinder tool.

  First of all, you have your form:

  

  Then, draw a rectangle on the top and line it up with the outer edge:

  

  Select the shape you want to cut out and the rectangle:

  
  you open the pathfinder tool palette and select the tool "less Front":

  

  You will then see this:

  

  Follow the same steps again for the line in the Middle:

  

  Again select the plan less first tool:

  

  And there you have it:

  

  I hope this helps.

• How to cut and paste the image of the body of the received email

  I'm trying to cut and paste an image included in the bottom of an email and insert it into a Word document so that you can size and print. I can highlight, cut it with Ctrl C, paste it into the document Word with Ctrl V, but the image doesn't show, although the picture frame appears when I click on the place where the photo was pasted. Framework, but empty, no image. Any thoughts?

  Thanks to everyone for their help.

  The problem has been resolved - to try and finally understand everything.

  If you encounter this problem, it is perhaps because, unless you know the file format of the inserted picture, programs can not figure it out for you. Place your cursor on the image, right click and save the image under a .jpeg instead of simply copying. Then work with the file .jpeg in any photo management program you use normally - or even insert it in Word.

• How to cut vectors to the size of the artboard

  Hello!

  I have a multi layer doc. The number of vectors look at the dimensions of the work plans. I need a clean to the exact size plate. I was playing with the shapefinder, but did not get the results I wanted.  What is the best way to cut any vector outside the artboard.

  Thank you

  Maxi

  Here's a little video:

  http://vector.tutsplus.com/tutorials/Tools-Tips/Quick-Tip-four-ways-to-crop-a-vector-illus Board of Directors in adobe illustrator.

• How can I myself spent the 1935 installation error code?

  Hi, I am unable to download Adobe Pro successfully - I get an error code 1935. Thanks for any help!

  

  Hi John,.

  I just spent 2 hours on the phone with a very useful Adobe support person. The error is due to a problem with Microsoft Windows Update. There is an 'important' update which is not able to install correctly, which in turn causes the problem with the installation of Adobe.

  I have not had a chance to research or contact Microsoft on the issue. If a resolution can be found, I will update this post.

  Hoping that!

• How to cut together on a pie graph

  Hiya

  This seems like it should be simple, but I can't understand it.

  I want a graph of pie like this http://design.ubuntu.com/wp-content/uploads/ubuntu-colour-wheel-voice.png

  But I can't understand how to cut everything in the Middle, I tried many options using pathfinder face - but I got the answer "the filter gave no results, please select two paths that overlap.

  I tried to use "expand" on the pie chart, but that did not help either.

  Someone knows what to do?

  Any help much appreciated.

  You cannot use the pathfinder on a live graph options.

  You can either:

  -Use opacity masks

  -dedicate the chart (by dissociate from it), but you lose the ability to change the numbers

• How to cut the text in Illustrator?

  I am lettering my comic in Illustrator, and I'm pretty new to Illustrator.  How can I cut or obscure the text?  For example, if I have the lettering on a book that is partially shot on a shelf, or lettering on the side of a semi trailer, but it is blocked by an object in front of him.  How 'block' it with an invisible object, or slice, or something?

  I realize that it involves probably change my text in a chart so that it is no longer editable.  No problem.  I just need to learn how do.  I don't know there's a great tutorials on it; I don't know how to find them because I don't know how it's called.  I thought it would be masking, but everything I tried had no effect.

  Thanks in advance for your help.

  EDIT: I thought it might be useful I showed exactly the situation I have here.  I circled the two spots where I need to be able to edit the text.  As you can see on the yellow triangle, I was juggling with masks to try to understand this.

  These four panels is arranged as cards to play, with the name of each participant and the suit of the card at the top and bottom.  The problem is that you map overlays another, so I need to be able to cut name Thaddeus of the Sultan on the left and the J (for Jack of hearts) on the right.

  All the texts of four cards are on different layers, with works of art and the word balloons and text on layers separate as well.

  

  This is page 1 of the next metro Med, the Hospital of superhero show

  Copyright Michael Hutchison

  I THOUGHT ABOUT IT!  Trial and error, I just kept going through the possibilities until I found a combination that worked.  Thanks, Silkrooster, to show me the right path!

  Here's what I did (just for someone else who finds this and needs the solution to a similar problem).

  1. I put my yellow triangle ON the part of the text I wanted to keep in this case, the curvature of the J and the symbol of the heart.
  2. I selected the triangle layer so the layer J/heart.
  3. In the window of transparency, I used the pop-up menu corner (I'm in CS4) to check "new opacity masks are clipping" and make sure that the "...» are reverse' option has not been verified.
  4. I chose to "make opacity mask".

  That's all!  Ta - dah!

  

  

  Thanks a lot for all your help!

  (Apologies, it's really Silkrooster who had the right answer, but I am marking this as the correct answer just so that future people have a little more guidance step by step it spelling.)

• How I find myself with two passwords to iCloud for the same account?

  How I find myself with two passwords to iCloud for the same account?

  For security reasons, I only use iCloud for Contacts and "find my iPhone".

  Several months ago Apple forced me to change my password to iCloud.  So I did this.   In the last months, I used successfully the new password to 10 or 12 times when asked without problem.

  However, I received a notification of a software update for my Apple Watch. I did the update without problem. However, after completing the update my iPhone asked me to connect to my iCloud account. When I did this, she rejected my password. I made 4 attempts typing very slowly and with care for you sure I did it right.

  Then, operating under a hunch, I decided to enter my old password to iCloud. It worked?  I'm confused about this, any ideas would be appreciated.

  I had a similar problem last year. I had to call Apple. Contact is a bottom of this page.

• How to cut a shape of the object a picture and put it in its own?

  Photo cut and save

  How to cut a headshout of one person on a phot with several people in it and then save it as it's own photo?

  You might cut back on the part you want to save as a
  new photo.

  (be aware... If the original photo is not high quality...
  your cropped section can be grainy)

  Many photo editors have the ability to crop but since
  I don't know what you have installed... I'm going to suggest
  Windows Paint... (Start / Programs / Accessories /)
  Paint) to help you get started.

  Try to open the picture in paint.

  File / open... Find and select your photo.

  In the top left panel, left click the Select button.
  (looks like a rectangle made up of points)

  Left click / drag a rectangle around the portion of the photo
  that you want to copy.

  Now, you'll see a dotted line around the selected area.

  Reach... Edition / copy.

  Reach... File / new.

  Reach... Editing / paste.

  Reach... File / save as.

  Choose a backup folder.

  Enter a name.

  Choose a format (JPEG).

  On the left, click on the "Save" button.

• How can I cut & paste in the address bar?

  How to cut & paste?  It's been too long, can not think!  Help!

  Hello

  Select what you want to copy or cut with the cursor of the mouse - and then Ctrl + C to copy or Ctrl + X to cut - move the cursor of mouse where you want - then Ctrl + V to paste

  Here's a good tutorial on cut, copy, and paste

  http://www.bleepingcomputer.com/tutorials/tutorial95.html

  Copy text

  What happens if you work on a word processing document and you must take the text that is in another document and add it to the current document. You can manually type the information found in the original document in the new document, but which could take quite a long time. Fortunately for us, the operating systems give us the ability to copy text from one document to another document called copy. When you copy data highlighted, this data is stored on the Clipboard until you are ready to paste this data into another program

  To copy something, you first highlight the text you want to copy using one of the methods described above. Then when you highlight text you want to copy, you can copy it to the Clipboard in one of three ways:

  • When the text is highlighted you can press the Control key and the C button the same to copy the data.
  • Right-click on the files or highlight text and clicking on copy.
    
  • If there is an edition menu you can click Edit and then click copy.

  Once you use one of these methods a duplicate of the highlighted text will be placed in the Clipboard, allowing you to paste it into another document or application.

  Cutting text

  Cup is very similar to copy they have both put the item highlighted in the Clipboard to paste future. The difference is that you have when you cut the text selected, it will remove, or cut, the text of the original location and place it in the Clipboard. So it is important to be careful when you use this command, because it is possible to lose data if you mistakenly cut the data in the document and then save the file.

  To cut text you must first highlight the text or data you want to cut by using one of the methods described above. Then when you highlight text you want to cut, you can cut it to the Clipboard in one of three ways:

  • When the text is highlighted you press the Control key and the X button in the same cut data.
  • Right click on the highlighted text and clicking on cut.
    
  • If there is an Edit menu, you can click change , and then click cut.

  Once you use one of the following methods, a copy of the highlighted text will be placed in the Clipboard and highlighted data will be deleted from the document. It is important to note that the text just disappears a document if the document is editable. For example, you can not cut text from a web page or a set of documents read-only because it is not editable.

  Paste text

  Now that you know how to copy and cut data of a document and put it on the Clipboard, you must learn how to retrieve these data and place them in your document. Once the data has been copied or cut from a document, you can then paste it into another document, or the same document by retrieving this information to the Clipboard using the Paste command.

  Simply move your cursor to the location where you want the data to be pasted into your document and then choose one of the methods to paste the data.

  • With the cursor at the location where you want the data to be pasted press on the button control and the V key in even to paste the data.
  • Right-click on the document and clicking on dough.
    
  • If there is an edition menu you can click Edit and then click Paste.

  After you use one of the commands above the data contained in the clip Panel will now pasted into the document.

• How to cut the plan of $118.4 (hk) per month?

  How to cut the plan of $118.4 (hk) per month?

  Cancel your membership Adobe Creative Cloud

• How can I create a multi page PDF from a multi .tif file?  On the creation of a file .pdf from a file multiple .tif, the .tif file is converted to a single page (always the first page of the .tif file) .pdf.  The rest of the document is cut off. The .tif

  How can I create a multi page PDF from a multi .tif file?  On the creation of a file .pdf from a file multiple .tif, the .tif file is converted to a single page (always the first page of the .tif file) .pdf.  The rest of the document is cut off. The .tif file comes from a document by using the fax & Scan app scanner in Windows 10.  I am running Adobe Acrobat Reader DC, which I run with my subscription 'Adobe PDF package, monthly'.  It worked fine until about a month.  I've since upgraded to Windows 10 and Acrobat Reader DC.   I would be very grateful for any help. Eoghainn

  Hello

  This problem has been reported as a bug. Our team of engineers working on this priority issue.

  Kind regards
  Nicos

• How to keep or make the area outside the transparent cutting tool. For me he is white and comes when I print

  I like to use the cutting tool and the photo frames.  For example, I use an oval frame that leaves the edges of the original outside the image. Initially the air transparent edges, but they are white and show when I print I do not have a completely white background

  How to make the box really transparent outside - or adjust?

  rross43 wrote:

  I like to use the cutting tool and the photo frames.  For example, I use an oval frame that leaves the edges of the original outside the image. Initially the air transparent edges, but they are white and show when I print I do not have a completely white background

  How to make the box really transparent outside - or adjust?

  If you save your picture in jpeg format, you cannot have transparency. The jpeg format simply doesn't support transparency. You must save in .png, .psd, .tiff formats.

  Note that the layer "background" in the layers palette must be transformed into a 'standard' layer to keep the transparency. Menu layer > New > layer.

• How to cut a picture on an image and then give him the normal air?

  I'm new to paintshop. I have a picture that I cut out a person, and I can do it, but after I cut the image how the image new normal appearance... For example in this picture I can cut one of the tennis people, but how do I put the net return ect...

  original image.

  cut the photo.

  The effect I'm looking for, it's that there are 2 tennis players playing a person on the other side. How do I add a layer or all I have to do to make it look real... Don't know how to fix the net. I can make the color of the ground and maybe add the white lines. I cut out person very fast just to show them. I would have taken some time to cut the person better, but it's just a picture of example for anyone.  Thanks for any info. I had a stroke a few years ago so my words are not great a few times. Thanks again for your time.

  Rather than simply cut the person, make a selection of the person and use Content Aware Fill (SHIFT - F5) to remove the person. Photoshop will do a good job of filling in the selection