How initialize/initialization table clusters

Similar Questions

• Determine which cluster and the array index element was clicked on table clusters

  Hello

  I'm overload of brain with dynamic events and references and nodes of property etc.

  I am trying to identify the cluster and the array index element that was clicked on table clusters

  This gives me the name of the element:

  

  Is this reasonable?  How can I get the index?

  Thank you

  Paul

  Hello

  Download the VI in this link (also attached).  It gives you the index of the array element that you clicked. Hope this will help you.

  Kind regards
  Nitz

  (Bravo to give good answers, mark it as a Solution If your problem is resolved)

• How the nested table that is stored in the database?

  How the nested table that is stored in the database?
  The nested table column is stored with the table main or separate in the database?

  A nested table is a table that is stored in the structure of another table. It is used to support the columns that contain multivalued attributes.

  If you want to use the same type in multiple places, create them on a global scale and these will be discussed under 'Types'.

• How to import tables, index, tablespace, etc. of a DMP.

  Hello
  
  I would like to know how to import tables, index, tablespace, etc. of an export an Oracle 10.2.0.1 to apply on an Oracle 11.2.0 DMP. When I import the DMP file a unique Tablespace, for example, will users tablespace data.
  
  On the basis of origin, we have different tablespace each separated with different content (tables, index) and I would like to know if it is posible to import the same schema, tables, index, tablespace quite with a DMP alone, Export. I can't use DBUA because the database on the 10.2 software is missing, I have only one file (24 GB) DMP DMP!.
  
  Thanks for the reply,
  
  Sorry for my English :).
  
  Kind regards.

  The standard solution is

  -Make sure that the target user doesn't have the UNLIMITED TABLESPACE privilege, using REVOKE
  -Make sure that the target user has no QUOTA on the default tablespace using ALTER USER... QUOTA
  -Make sure that there is quota on the tablespace (s) of the target, using ALTER USER... QUOTA
  -import indexes = n
  -empty the index orders in a separate file
  IMP indexfile =...
  -run this file

  --------------
  Sybrand Bakker
  Senior Oracle DBA

• How to create tables without visible lines?

  How an a table with no visible vertical and horizontal lines dividing the rows and columns?

  Owen,

  Luca

  Just turn off the borders of the cells.

• Initialize table?

  Buenas, Porque El preguntaros first not be muestran Los Datos En El 'output array. Bij appear same Los problemas "tabla iter."

  No "constant matriz" TR Es Por if, as services can?

  Of Cuando solucione preguntare ESTO Algo mas Complejo os.

  Gracias Por adelantado

  Hi pescajaime,

  The VI "Insert table" inserts a table n-1 dim in a table of size n to the specified index. In the attached screenshots I guess that a constant variety of dimension 2 is connected to the entry of the "insert in Array. I also assume that you do that add items to the first column of this table of 2 size (what is more, I guess you just add a 1 element at index 0.0 this table). If this is the case, you can only insert an array of 1 dimension for the first column of table 2 original size.

  Therefore, when you cable the output array of the VI that is associated with the HS1560 device for the "new item/sub-table" entry "Insert table", VI this VI is just the first line insertion of the 2 dimension table. I guess that the specified index is 0 (0 times 5 is equal to 0), so LabVIEW is the first line of the 2 array dimension inserting this device ouptus the 'HS1560' in the first column of the original array. If you compare "output table" and "Tabla iter" indicators you can check that the first column of the "iter Table" has been added to the first column of the table of origin at index 0. Since this column caontains 11 loose, a '1' is located in the 12th position of the column. The attached extract shows this behavior.

  To insert the entire table of dimension 2 'Table iter' in the constant table, you add to the table constant as many elements as the number of lines containing 'Table iter. "

  I hope this helps.

• Question of nested initialization Tables collection

  When I'm this operation with Index by table it works howerver not able to perform even with the Tables IMBRIQUEES

  DECLARE

  TYPE column_record IS TABLE OF employees % rowtype

  INDEX BY PLS_INTEGER;

  EmpData column_record;

  I PLS_INTEGER: = 100;

  BEGIN

  WHILE I < = 200 LOOP

  SELECT * INTO empdata (i)

  EMPLOYEES

  WHERE employee_id = i;

  i: = i + 10;

  END LOOP;

  I: = 100;

  WHILE I < = 200 LOOP

  DBMS_OUTPUT. Put_line (EmpData (i). FIRST_NAME. "Work on the profile ' | EmpData (i). Job_id |' a salary '. EmpData (i). SALARY);

  i: = i + 10;

  END LOOP;

  END;

  /

  Steven is working on a salary 24000 AD_PRES profile

  John works on a salary 8200 FI_ACCOUNT profile

  Matthew is working on a salary 8000 ST_MAN profile

  Mozhe working on profile ST_CLERK has salary 2800

  Joshua working on profile ST_CLERK has salary 2500

  Peter is working on a salary 10000 SA_REP profile

  Louise is working on a salary 7500 SA_REP profile

  Tayler is working on a salary 9600 SA_REP profile

  Winston works on the SH_CLERK a salary 3200 profile

  Timothy working on SH_CLERK a salary 2900 profile

  Jennifer works on the AD_ASST a salary 4400 profile

  PL/SQL procedure successfully completed.

  Now when it is run with the IMBRIQUEE TABLE:

  SQL > DECLARE

  2 TYPE column_record IS TABLE OF employees % rowtype;

  3 empdata column_record;

  4 I PLS_INTEGER: = 100;

  5 BEGIN

  6 WHILE I < = 200 LOOP

  7 if he would CHOOSE * IN empdata (i)

  8 EMPLOYEES

  9. WHERE employee_id = i;

  10 i: = i + 10;

  11 END OF LOOP;

  12 I: = 100;

  13 then I < = 200 LOOP

  14 DBMS_OUTPUT. Put_line (EmpData (i). FIRST_NAME. "Work on the profile ' | EmpData (i). Job_id |' a salary '. EmpData (i). SALARY);

  15 i: = i + 10;

  16 END LOOP;

  END 17;

  18.

  DECLARE

  *

  ERROR on line 1:

  ORA-06531: Reference to an uninitialized collection

  ORA-06512: at line 7

  Too much remedy that I have included the following line:

  And then I'm stuck with another error.

  SQL > DECLARE

  2 TYPE column_record IS TABLE OF employees % rowtype;

  3 empdata column_record;

  4 empdata: = column_record();

  5 I PLS_INTEGER: = 100;

  6 BEGIN

  7 then I < = 200 LOOP

  8. SELECT * IN empdata (i)

  9 EMPLOYEES

  10. WHERE employee_id = i;

  11 i: = i + 10;

  12 END LOOP;

  13 I: = 100;

  14 then I < = 200 LOOP

  15 DBMS_OUTPUT. Put_line (EmpData (i). FIRST_NAME. "Work on the profile ' | EmpData (i). Job_id |' a salary '. EmpData (i). SALARY);

  16 I: = i + 10;

  17 END OF LOOP;

  18 END;

  19.

  EmpData: = column_record();

  *

  ERROR on line 4:

  ORA-06550: line 4, column 9:

  PLS-00103: encountered the symbol "=" when expecting one of the following conditions:

  constant exception < an ID >

  < a between double quote delimited identifiers > double long Ref table

  char time timestamp interval date binary character national nchar

  The symbol '< identifier >' has been substituted for "=" continue.

  Guide gently on the correct way to do it.

  Do you miss extend

  DECLARE
     TYPE column_record IS TABLE OF employees%ROWTYPE;
  
     empdata   column_record;
  
     i         PLS_INTEGER := 100;
  BEGIN
     empdata := column_record ();
     empdata.extend(200);
     WHILE i DECLARE
     TYPE column_record IS TABLE OF employees%ROWTYPE;
  
     empdata   column_record;
  
     i         PLS_INTEGER := 100;
  BEGIN
     empdata := column_record ();
     empdata.extend(200);
     WHILE i
  

  Steven Working on Profile AD_PRES has salary 24000
  John Working on Profile FI_ACCOUNT has salary 8200
  Matthew Working on Profile ST_MAN has salary 8000
  Mozhe Working on Profile ST_CLERK has salary 2800
  Joshua Working on Profile ST_CLERK has salary 2500
  Peter Working on Profile SA_REP has salary 10000
  Louise Working on Profile SA_REP has salary 7500
  Tayler Working on Profile SA_REP has salary 9600
  Winston Working on Profile SH_CLERK has salary 3200
  Timothy Working on Profile SH_CLERK has salary 2900
  Jennifer Working on Profile AD_ASST has salary 4400
  

• BUG: 1 D table sort isn't sorting table of Classes and table Clusters contain Classes

  the function "sort the table 1 d.

  I wanted to sort the array of Clusters [number and class]. But to my surprise, LV is not like him.

  Okay, I need sort table Classes. But maybe once in the future I will. :-)

  'Research in table 1 d' is the use of classes I do not understand why 'sort the table 1 d' does not work.

  

  This problem is in LabVIEW 8.2 and 8.5 2009

  I think that the search feature of table 1 d can address each element in the table as an agregate whereas sort requires access to the private data in the data from the class and carrying it even further...

  Say all the elements are in the Parent class and a tow children who both have private data that are uniqie each and not present in the class of parents...

  How they manage breaking when there are different fields to sort on?

  Ben

• How replot a table using plotXY without creating a new parcel?

  I want to replot continually a table using plotXY without increment the name of the parcel. Is this possible?

  Whenever I call plotXY a new path is created. For example, the first time that plotXY is run, I get a marked route Plot1 (parcel number 1). The second time I call plotXY, I get a parcel named Plot2 (parcel number 2) and so on. But I want to draw the same picture several times that I've added more data to it. And I want the name of the parcel to be Plot1 every time.

  I know that I can change the name 'Plot1' attribute after the call to plotXY. But I feel that somewhere in the internal parts of the graph I'm ever increasing utilization of certain resources. I'll be Replot the table several hundred thousand times so I don't want to run out of memory or something.

  So my question is this, is it possible to re - initialize a graph to its original state before you run the plotXY?

  Do not confuse the name of the parcel and manage the resources allocated to the curve. If you delete all the plots in the graph with DeleteGraphPlot () then draw a new curve, you should have 'Track 1' under the name of the plot, but you will get a continuously raise the handle of the plot; This does not assume that you are summarizing additional resources whenever you draw on the graph, the graph simply never reuses draw handles associated with deleted locations.

  In your case, you can also try a different approach:

  1. Use a graph of the band instead of the chart: if possible you will avoid the problem of more names of conspiracy and will reduce the program activity that you will draw only new points in every race
  2. Only new field points with PlotXY showing only the first parcel in the legend: you will need to keep track of array index, already mapped out so that if you have traced up to array [index] to date, you will draw array [index] to array [newindex] on the new iteration

• How to create table of controls (Images, buttons) in ActionScript

  Hello!

  Could someone help with ActionScript and Playbook SDK?

  How can I create a two-dimensional array of controls (buttons, images, text fields) in ActionScript?

  And how do I use radio buttons in ActionScript?

  Hey,.

  keys and parts do not have ID like in html and javascript. That being said, its impossible to do it like that. the best approach is to create your own class that extends the LabelButton (or whatever component you need) and have an id property that is implemented. so, you can set a code personal to her. I've implemented what you asked below. You can apply this to other components as well enough to make changes to the class and modify the extension. Here is the code:

  LabelButtonTest.as (main application class):

  package
  {
      import flash.display.Sprite;
      import flash.display.StageAlign;
      import flash.display.StageScaleMode;
      import flash.events.MouseEvent;
  
      [SWF(width="1024", height="600", backgroundColor="#CCCCCC", frameRate="30")]
      public class LabelButtonTest extends Sprite
      {
          private var myButtons:Array;
  
          public function LabelButtonTest()
          {
              super();
  
              // support autoOrients
              stage.align = StageAlign.TOP_LEFT;
              stage.scaleMode = StageScaleMode.NO_SCALE;
  
              /*
               *  Initialize your array of 2 X N (in our case we will be using 10)
              */
  
              myButtons = new Array(new Array(), new Array());
  
              /*
               * Now we set up our array, first doing the first row and
               * set up 10 buttons with their own ID using the constructor
               * for our custom class CustomLabelButton(ID)
              */
  
              for (var i:int = 0; i < 10; i++)
              {
                  var myBtn:CustomLabelButton = new CustomLabelButton(i);
  
                  myBtn.label = "Button " + i;
                  myBtn.setSize(100, 50);
  
                  myBtn.addEventListener(MouseEvent.CLICK, onClickEvent);
  
                  myButtons[0].push(myBtn);
  
              }
  
              /*
               * We do the same for the second row of buttons, starting
               * with 10
              */
  
              for (var i:int = 10; i < 20; i++)
              {
                  var myBtn:CustomLabelButton = new CustomLabelButton(i);
  
                  myBtn.label = "Button " + i;
                  myBtn.setSize(100, 50);
  
                  myBtn.addEventListener(MouseEvent.CLICK, onClickEvent);
  
                  myButtons[1].push(myBtn);
              } 
  
              /*
               * Finally we cycle through our arrays and add them to our display
               * this wil produce two rows of 10 buttons going accross
               * each when clicked will call the funciton onClickEvent and
               * trace out their ID to the debugger
              */
  
              for (var i:int = 0; i < 10; i++)
              {
                  var myBtn:CustomLabelButton = myButtons[0][i];
                  var xPos:int = (i * 100) + 10;
                  var yPos:int = 10;
  
                  myBtn.setPosition(xPos,yPos);
  
                  addChild(myBtn);
              }
  
              for (var i:int = 0; i < 10; i++)
              {
                  var myBtn:CustomLabelButton = myButtons[1][i];
                  var xPos:int = (i * 100) + 10;
                  var yPos:int = 60;
  
                  myBtn.setPosition(xPos,yPos);
  
                  addChild(myBtn);
              }
  
          }
          public function onClickEvent(e:MouseEvent):void
          {
              /*
               * Print out ID of the button thats clicked
              */
              trace("the button ID is: " + e.target.id);
          }
      }
  }
  

  CustomLabelButton.as (our custom label with the ID property button class):

  package
  {
      import qnx.ui.buttons.LabelButton;
  
      public class CustomLabelButton extends LabelButton
      {
          private var _id:int;
  
          public function CustomLabelButton(num:int = 0)
          {
              super();
  
              id = num;
  
          }
          public function set id(num:int):void
          {
              _id = num;
          }
          public function get id():int
          {
              return _id;
          }
      }
  }
  

  run the code and see how it works. I hope that's what you're looking for. Good luck!

• How the repeating table inside a control valve?

  Hello

  Does anyone know how to make the repeating table inside a control valve in LabWindow CVI? I see that there is option for a Panel to scale content in resizing, but not available for a tab control. Any ideas?

  Thank you very much!

  Weiming

  I don't know, I understand what you're trying to do, but you can set ATTR_SCALE_CONTENTS_ON_RESIZE on each tab panel.

  GetPanelHandleFromTabPage (panelHandle, PANEL_TAB, 0, & tabPanel);
  SetPanelAttribute (tabPanel, ATTR_SCALE_CONTENTS_ON_RESIZE, 1);

• How to use table 2 to draw an XY graph

  Hello ~

  I use for loop to teststand2014 to get 2 arraies with the same indicator loop as an attachment (Vi_array = input voltage, output power = Po_array).

  How can I build a XY Chart with these 2 arraies, Vi_array x and Po_array as Y?

  Thank you!

  You can create a table to 2 dimensions on the 2 tables, you mentioned and use the attributess of 'DataLayout' and 'DataOrientation' for the new table that you have generated. Please check attached sequence file created using TestStand 2010 version of how it can be done. I tested the graphics in XML reports.

• How to add table 1 d to the report...

  I want to add table 1 d to a report, but when I use the table append to VI of the report, and then he wants to connect to table 2D. But if I want to add table 1 d to a standard report, so I don't know how to do this.

  Please help me with this...

  Thank you

  You can try this.

  

  I hope this helps.

• How to use table 1 d of waveform in the Matlab Script

  I use Lavbiew to make the classification of Vibration signal.

  The first problem I encountered is the form of incorrect data.

  The output signals are 1 d arrary of waveform. I don't know how to use the Matlab Script.

  is someone can help me with this?

  I really appreciate your help.

  Hey beauzhang,

  I hope that you are well today. It certainly seems that we lack in some problems with the different sources and data types of wells. LVM VI Express load you have emerged from a table of waveforms. So we would need to do a few things. First of all, we need to ignore the range of interests, and we must get the waveform data elements table.

  I have provided an example of how we can extract the waveform in position 0 of the table and then pass the array of data values to the script node Y. I have configured the entry of the data of a table 1 d Reals node (by adding an entry and then the right of entry and select choose data type.)

  If you are interested in getting the values Y and build the table like you did in the script, you need to implement a different subset of table and looping mechanism in LabVIEW code to move each item to the script individually. However, I would recommend working with the entry level instead.

  

  I hope this helps!

• How to change table

  Hi all

  How to find the characters in the table and view it in table 2 If Search_Character contains table.

  I am using the model of correspondence but not finding the character

  Thank you

  Thank you. I did it.