How instance recovery and restart the database after SHUTDOWN ABORT?

Similar Questions

• I have to stop and start the database after the data cache value increases?

  Hello!

  rule of Calc is in error and indicating that the error can be caused by data cache setting small size?

  I increased the value, but it still gives the same error message. I can't stop and start the database, just clicked on apply.

  I need also to check the journal rule and computation of the application to determine the cause of the error.

  But the key is in the question in the header...

  Kind regards

  user637777

  
  

  Yes, you do.

• How to create and use the database in the development of a mobile Web site?

  Hello

  I am a beginner in the creation of Mobile-based Web sites. So, please can someone help me as I want to use a database for a website of the mobile base. How can I proceed further on this issue? I know what database I use and how a connection can be made to it and using what language?

  Please do not respond.

  Thank you and best regards,

  Richa Bhatia

  If you are a Microsoft Developer, you can use ADO.NET to access the database.  This is because it is the technology on the server side and is running on the web server and not to the device.

  You can create your Web site by using one of the web technologies side server such as ASP.NET, JSP, PHP etc. Any technology that will serve up to HTML will work.

  When developing web sites for mobile devices, you will quickly realize that it is not a "one size fits all".  Each set of HTML markup will probably have to be customized for each of the mobile that you are eager to target.  And then, for each version of the operating system for mobile devices there are differences in sizes of rendering, JavaScript and HTML/CSS screen capabilities.

  My best analogy is thinking differences between desktop browsers such as IE5/6/7/8, Firefox, Chrome, Opera, Safari vX.Y.  Then multiply that by about 10 fold when it comes to differences in mobile browsers.

  Have a Web site that supports all mobile devices with a set of means HTML you'll probably adopt an approach more common denominator based on lowest mobile device features, you want to support.  The alternative is create targeted for each mobile user experiences.

• Start-up of the menu for my 4th gen Apple TV came in Chinese, and I can't figure out how to save and restart the whole upward in English (so I can read it).  Anyone know how to restart the whole upward in English?

  Start of the menu for my fourth generation Apple TV came in Chinese, I can't read. Can someone tell me how to save the boot menu and start again in English?

  I think that this article should help you:

  https://support.Apple.com/en-us/HT202799

• How to retrieve data from the database after the removal of the lines of the VO?

  Hello
  I use Jdeveloper 11.1.2.1.0
  I have a master's degree and a child.
  
  So according to my use case when a value in the master t changes the corresponding child should be removed.
  
  but when I change it to any other value I want to cancel the delete operation and retrieve values in children.
  
  Is it possible to do?
  
  
  Kind regards
  Nigel.
  
  Edited by: Nigel Thomas March 29, 2012 05:07
  
  Edited by: Nigel Thomas March 29, 2012 05:09

  Check [url http://mjabr.wordpress.com/2011/05/20/perform-deleteundo-delete-without-using-rollback/] recover deleted lines without using rollback

• I try to update Framework 4.0 and every time I restart the server after installation. 4.0 isn't on 3.5 just here.

  I have a server to SP1 Windows 2008R2 with .NET Framework 3.5. I try to update Framework 4.0 and every time I restart the server after installation. 4.0 isn't on 3.5 just here. Why it does this and how do I upgrade to 4.0 to run programs that require the 4.0?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How to remove and delete the in computer HP recovery Partition.

  Hello

  How to remove and delete the Partition Recovery on HP computer after I installed win 7 (clean install) befor was Vista?

  Thank you

  
  

• After recovery and restarts in 9i, may go up but not open

  It seems that I can never leave this group, but a big thank you to those who have this us far.
  
  I recently recovered our Database 9i Windows XP. I was able initially to open and access the database via sql and enterprise manager. However after a reboot I can more open, if I can get. Trying to open it, I get ORA 01092, terminated, Oracle instance forced disconnection.
  
  I checked that:
  
  (1) the tnsnames.ora and listener.ora files all have the same HOST entry (although in listener status below, I see several values, I don't know if this is related to this problem. I also note that the State of our database is listed as "unknown" in the status of the listener. When I was able to connect through the company manager she also initially reported the same thing.)
  (2) a the ORACLE_SID value = < SID >.
  (3) there aren't any errors reported in/RDBMS/TRACE/alert_ < sid >. Newspaper. They go elsewhere?
  (4) I am able to tnsping our SID.
  (5) in respect of the Services, there is a < sid > OracleService which is started and set to start at startup.
  
  Any ideas? Thank you!
  
  Lsnrctl status:
  
  LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on March 14, 2010 22:30:21
  
  Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = < HOME >)(PORT=1521)))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production
  Start date March 14, 2010 22:09:43
  Uptime 0 days 0 h 20 min 39 sec
  Draw level off
  Security OFF
  SNMP OFF
  Listener parameter File D:\oracle\ora90\network\admin\listener.ora
  Listener log file D:\oracle\ora90\network\log\listener.log
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = < hostname longer stated above, maybe contains info field? >)(PORT=1521)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
  Summary of services...
  "< SID >" service has 1 instance (s).
  Instance '< SID >', status UNKNOWN, has 1 operation for this service...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  The command completed successfully
  
  The tnsnames.ora file is:
  ####################################
  # TNSNAMES. ORA Configuration File:D:\oracle\ora90\NETWORK\ADMIN\tnsnames.ora
  # Generated by Oracle Enterprise Manager V2
  # Date of...: Fri Aug 01 11:00:03 PDT 2003
  ####################################
  
  AGI =.
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = < HOME >)(PORT = 1521))
  )
  (CONNECT_DATA = (SID = < SID >)(SERVER = DEDICATED))
  )
  
  The listener.ora file is:
  
  # LISTENING PORT. ORA Network Configuration file: D:\oracle\ora90\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = < HOME >)(PORT = 1521))
  )
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
  )
  )
  )
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = D:\oracle\ora90)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (Global_DBNAME = < SID >)
  (ORACLE_HOME = D:\oracle\ora90)
  (SID_NAME = < SID >)
  )
  )

  Eventually the database was actually 9.0.1.x and NOT 9.2.0.1

  Since you're using 9.2.0.1 you will need to 'upgrade' to 9.0.1.x to 9.2.0.1

  See http://download.oracle.com/docs/cd/B10501_01/server.920/a96530/upgrade.htm#1009200

  Hemant K Collette

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments

• computer restored IBM won't let me go beyond the introduction of identy... closes and restarts the computer to the same: Enter name and ID... then again, it does the same thing. How can I save this monster?

  computer restored IBM won't let me go beyond the introduction of identy... closes and restarts the computer to the same: Enter name and ID... then again, it does the same thing.  How can I save this monster?

  Hello

  First, disconnect all the external devices connected to the computer, and then try to start and check what is happening. If the same happens, then you can try to start in safe mode and check if you are able to boot to the desktop. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to make a text field to accept a capital letter has or a number in the position of the first character and only the numbers after that?

  Hi all

  We have a text field in one of our screen in our mobile app. Currently the user can enter alpha numeric characters in this text field.

  It is now that this field should accept a capital letter A or a number in the position of the first character and only the numbers after that.

  Could someone let us know how to do this?

  Thank you.

  Or, how about the substitution of this abstract method in textFilter?

  public boolean validate(character char,
                          AbstractString text
  int position)

• How to back up and restore the database of Virtual Center?

  Hi all

  I have to prepare a document on how to save and restore the different types of database Vitrual Center.

  But I can't find information are contiguous with this topic.

  Could you please help me

  It will be useful as well

  http://www.VMware.com/files/PDF/vc_microsoft_sql_server.PDF

• How can I restore and recover the database to a different server using RMAN?

  Hello Friend:
  
  How can I restore and recover the database to a different server using RMAN? I want to implement an enviroument which has a different enviroument and different directories.
  
  That's the two servers. different stored different on each server and a single link, a table library where backup set.
  
  I can only restore and recover the database of the Rman command. Could you give me a demo?
  
  Thank you

  How can I restore and recover the database to a different server using RMAN? I want to implement an enviroument which has a different enviroument and different directories.

  That's the two servers. different stored different on each server and a single link, a table library where backup set.

  I can only restore and recover the database of the Rman command. Could you give me a demo?

  Check this box
  * How to restore Rman backups on a different node when the Directory Structures are different [ID 419137.1] *.

• How to install and activate Windows XP after the upgradation of hardware

  I am using Windows XP SP3 and it is activated. I have the original and authentic installation CD
  with the product key in my possession. I plan to upgrade my hardware by replacing the HARD drive, motherboard, CPU.
  RAM and DVD player. Please inform how to install and activate the Windows XP to the new
  material configuartion. At the present time, I have no intention to migrate to the Windows 7 operating system.

  If you use OEM copy of windows XP, you will not be able to reactivate.  When you change the motherboard, you need a new license.

• How can I turn off the laptop after restoring it to factory settings?

  Hello everyone

  I'm selling my Portege R830-10 q If I want to restore it to the settings to factory (out-of-box state) AND THEN TURN IT OFF.

  I brought the laptop to factory settings successfully using the _TOSHIBA recovery Wizard_ and choosing * factory default software recovery (Recover State out-of-box) *. However, at the end of the process of recovery and after everything is back in place I was not able to TURN off the POWER to the laptop. It only gave me the option to restart. After rephrasing it, the Windows installation process starts.

  I don't want to install Windows, i.e. language, keyboard, user account, etc. I want to leave the Windows installation for the person buying the laptop to me. How can I turn off the laptop after the recovery of the system without having to install Windows?

  I would appreciate your help.

  Concerning

  Pedro

  When the recovery process is complete and you are prompted for a reboot just press start button / stop and turn it off. I think it's only thing you can do.

  Anyway, why not start Windows and go through the configuration option. New owner can modify this basic anyway parameters. As username Admin and language and the keyboard can be set as default.

  For example, if you have a picture of German recovery set to German. New owner can change in any case.