__How is a applies a layer of individual pshop on several files in the same position?

Similar Questions

• How to apply a master page to several documents at the same time?

  How to apply a master page to several documents at the same time?

  > The format of the page master is get imported, but the first page of all documents still remain with the format of page master default 'right '.

  AMP?

  Some content is unique to the first page mapped on master page first in the table to:
  View > reference Pages... MasterPageMaps

  That page and table do not exist by default, incidentally.

  and you make a:

  Format > Page layout > apply Master Pages

  After doing the import?

• How to scale objects in one layer with each object in the same position

  I have a card with symbols on it, placed exactly where they should be. Is it possible to scale all the objects in a layer or group to be bigger, but not treat them as a layer that is stretched to scale proportionally? Basically, how could I do each larger symbol as if each is to be climbed from their centres?

  I tried to select a layer so that each object is selected, and then transforming them (specifying a percentage of the scale). As a result, the objects are enlarged, but it produces the same results as a normal click and drag the corner alignment point. Any ideas?

  Object--> transform each. Each object / group object must be properly structured and selected individually.

  Mylenium

• Why can I no longer apply ratings to several photos at the same time?

  I used to be able to select several images and their add the same note at the same time. Now a single image will have the side has changed. Why?

  Opening 3.6, El Capitan

  Disable the single primary indicator.

  See this: keywords or ratings are only applied to one of the selected images - why?

  The reason is usually that the "Primary" indicator only is defined. With this option enabled, the changes by using the keywords, notes and other metadata will be applied to the only "primary selection": the primary selection is the active image selected. This image is marked by a thick white border in the browser and Viewer, see paragraph "navigating through and selection of Images" in the Manual of Aperture 3.

  To enable or disable the "Primary" indicator only, toggle the button "Primary only" marked by a '1' in the display controls, or use the main menu to open bar:

  Edit > primary only.

• Apply the filter at several layers at the same time (without converting them to a CG)

  Hey everybody,

  I looked everywhere for a way to simply apply the same filter with several layers at once, without first convert to smart object. I need to keep my layers intact and separated from the others. Does anyone know of a script or a way to do this?

  Any response is appreciated.

  -Andy

  Paul has a script "Filter selected Layers" on the site that makes the most of the filters.

  It's at the bottom of the "CSP Scripts" section.

  http://www.PS-Bridge-scripts.TalkTalk.NET/

• Export a page to the photoshop/illustrator file with the same structure of layer?

  Hello

  Currently freelancing for a company that create using the indesign work and I try to streamline the process of splitting the outside inside work is separate to import directly into damage layers. I know you can use a script to separate the outside layers and then export as interactive pdf, this opening in illustrator and then releasing to layers (build) I'm looking for an effective way more time to get to this point? Sometimes the work does not seem to import correctly into illustrator, because there clipping masks and weird stuff out there (their marketing team is huge and those working on the same things that make things way differently). I tried two script to split the work out in components, but they don't seem to not remember the position or just produce the element of the unique work.

  A typical file would be 640 x 640 page with multiple Indesign pages with 6 layers of each placed exactly and signed illustration of positional for. The perfect scenario would be to run a script to export directly into photoshop (keeping the culture and position) if it is then just one case to draw only a file directly in ae.

  There are various forums and I got asked in all of scripts but InDesign and in particular script is not my forte. It is one that could do the trick, but the link is no longer active: http://www.zenodesign.com/forum/PageToPSLayersV3.zip

  I know it may seem as it is lazy, but there are many things to animate by project in different sizes, so any help and pointers would be great!

  Thank you

  A

  It is one that could do the trick, but the link is no longer active:

  The latest version is here. This is an AppleScript script if OSX only:

  http://www.zenodesign.com/Forum/PageToPSLayersV7.zip

  If you have any questions see this thread:

  How to export indesign layers in photoshop (same structure) layers

• Disables the matte when applied to layer style

  Hello

  When I apply a layer (shadow) on a precomposition cache alpha style that has been previously applied suddenly stops working.

  Why? ! How can I fix?

  See you soon

  This is inherent in the operation of the layer styles. If it's just a shadow, you can try the classic effect of the same name, otherwise, you will simply add another level of nesting and apply layer styles above.

  Mylenium

• I would like to apply a layer style to a layer, but I want to apply as if the edges of the layer are at the edge of the layer

  for example a stroke like the one on the right

  http://i.imgur.com/A15q0E3.jpg

  Here's a way to do it:

  1. create a new layer on top and fill it with a solid color (any color, white will do).

  2. put the 'Fill' layer to 0% - not 'opacity', 'Fill '. See the image below.

  3. Add your layer style. Layer styles are not affected by the transparency of the fill.

  I hope this helps!

  Mike

  

• Apply a layer of /mask (?) to multiple Images

  I don't know even where to start so I can explain what I need to do.

  I'm trying to take a person on an image and then put the person on 100 other images in the same place. I don't want to have to do that 100 times different, being the person will be placed on the 100 images in the exact spot even pictures, I'm thinkn I have to make a copy (or store) the cutting of the person as a bed somehow. So how do that 100 other images (Backgrounds) help! I've looked everywhere and I'm just not getting it...

  Here's how I do in PSE2. Later versions could have otherwise.

  1. open the image of the person you want to copy. Use the different selection tools to select him/herself.
  2. copy the person selected in the Clipboard: Edition > copy or Ctrl + C in the PC, command + C on the Mac.
  3. open one of the destination pictures and paste it from the Clipboard: Edition > paste or Ctrl + V into PC, command + V on the Mac. The person will be placed on a new layer with transparent background.
  4 use the tool moving to resize/reposition the person if necessary.  When resizing, hold the SHIFT key while dragging a corner handle (Maj retains the proportions).
  5. keep this open image and open the next destination image.
  6 select the first image and hold SHIFT then drag the layer of the person to the destination image. This copy of the layer and keeps the person in the same relative position (if you do not move the person will be positioned to where you drag the layer).
  7. Repeat this copy of layer for the remaining photos.

  I don't know a way to do it in the world all of a sudden. Again, your PSE version could have this capability.

  Tip: After selecting initially the person pen 1 2 px selection to soften the edges before copy you to Clipboard. Then the stuck person will look more natural and less 'stuck '. I have an example of this at http://forums.adobe.com/message/3346946#3346946, msg #2.

• control individual rotation of several objects with also individual wiggles

  Hello

  I'm trying to animated 2D the leaves on a tree to create the illusion of a wind blowing leaves. To get the effect I want to have each off slowly and uniquely wriggling on the rotation parameter, but if a big gust is imagined, then create a rotation together with a controller that also adds a uniform rotation in line with each leaf on top of each individual wiggle. So, indeed, that each leaf is slowly randomly turning (as with a wiggle (1.5) applied to rotation), but then I can push each leaf simultaneously with an expression such as thisComp.layer("Adjustment_Layer_1").transform.rotation

  The problem is I want both of what is happening at the same time, and right now one cancels the other.

  I am a newbie to using expressions

  You just add the values.

  mGust = this.comp.Layer ("XYZ").transform.rotation;

  mWig = wiggle (3,2);

  mGust + mWig

  Mylenium

• I have a laptop running XP pro with office 2003. All of a sudden all the folders and files in the folders have read only attribute applied.

  This make all folders on the computer and all the files stored inside. The individual files are not performed. If I remove read-only folders and files and click OK, reopen the file and the attribute has been applied.
  Any solution to this problem s.

  Dave

  It's not a problem... it is a feature.

  At a time in the past, Windows has decided that the read-only attribute means nothing, because it applies to files, so Microsoft 'solved' this bit to indicate to whom the file has been customized.  There are other methods available if you really don't want to do a write-protected file.  The details are explained in the following Microsoft KB article.  I recommend reading the article in full to understand what Microsoft did...

  "You can not view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7"
      <>http://support.Microsoft.com/kb/326549 >

  HTH,
  JW

• To organize how to apply the same setting to all subfolders in a library?

  I created a new library and included a simple 'root folder '.  When you use Windows Explorer to view the contents (subfolders) in the root folder, I want all subfolders to be displayed with the same settings custom: arranged by updated (descending order), see details, set custom column widths (which I adjusted it), etc.  But no matter what I try, I can't not all subfolders have the same settings.

  I first tried to resolve one of the issues just like I wanted, thinking I could use the option under arrange / folders and Search Options / View (rather that the way XP and W2k allowed you to make the changes then 'apply to all').  But this option seems to be disabled with the library.

  Then I scrolled down (in Solution Explorer) and saw the same folder - without going through the library.  Yet once, I adjusted the settings to be just like I want.  Then I tried to arrange new / folder Options & Search / View.  This time, the and options WERE available... but even after I first and then subsequently settings still don't are not captured by other files - even not records 'child' of one, I changed.

  Then, I went back to the library and tried to change the "type of optimization" from the general to the Documents... and then repeat all the steps described above.  Still no joy... the bookstore seems determined to view all content "by the record" rather than how I want.

  I lost a few hours now, trying to do this simple task - VERY frustrating!  What Miss me?

  Thank you
  Adam

  IMO, this is not possible. You will need to individually customize the folder > subfolder > and so on and so forth...

  The opeion "Apply to all" has the XP/Win 2 K will only be missed here!

  See these for detailed information on libraries:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/libraries

  http://Windows.Microsoft.com/en-us/Windows7/libraries-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/working-with-libraries

  http://Windows.Microsoft.com/en-us/Windows7/customize-a-library

• apply a clipping for each top-level group mask in the document

  Sample file: https://drive.google.com/file/d/0BzEoJSYDhH_WcXhIalFRTk9qOGc/view?usp=sharing

  We can assume:

  Art • grouped on configurations with a line called die.

  • All groups exist on "Layer 1"

  I am a loop in groups and work with groups who has relatives is "layer". I have to loop through all the groups in the document, but when I created the clipping mask creates a new group and live my loop. I am now a loop only in groups of "Layer 1"and moving them to a new layer before the clipping mask. My script is breaking after the Group has been moved to the new layer. I have a bunch of alerts in there for debugging.

  #target Illustrator
  
  
  var idocX = app.activeDocument;
  var li = idocX.layers;
  
  
  function meetTheParents(PageItem){
    if (PageItem.parent.typename = "Layer"){
    return "Layer";
    } else if (PageItem.parent.typename = "GroupItem"){
    return "Group";
    } 
  }
  
  function isLayerFree(layer){
    if (layer.locked == false && layer.visible == true){
    var gpa = layer.parent;
    isLayerFree(gpa);
    return true
    } else {
    return false
    }
  }
  
  
  var trLyr = li.add();
  trLyr.name = "TRASH";
  var l1 = li.getByName('Layer 1');
  for (j = l1.groupItems.length -1; j >= 0; j--) {
    app.executeMenuCommand ('deselectall');
    var iGroup = l1.groupItems[j];
    if (iGroup.hidden==false && iGroup.locked==false) {
    if (meetTheParents(iGroup) == "Layer"){
    if (isLayerFree(iGroup.parent)){
    iGroup.move(trLyr, ElementPlacement.PLACEATBEGINNING);
    // set die variable to die in current selection
    alert ("Group " + j + " moved to trash layer");
    alert ("trash layer path items length = " + trLyr.pathItems.length); // I'm getting '0' here even though I just moved items into it.
    var die = trLyr.pathItems.getByName('proofLine'); // script breaks here
    alert ("Die identified for this group");
  
    die.move(trLyr, ElementPlacement.PLACEATBEGINNING);
    for (a = 0; a < trLyr.pageItems.length; a++){
    var thing = trLyr.pageItems[a];
    if (thing.hidden==false && thing.locked==false){
    thing.selected = true;
    }
    }
    var sel = idocX.selection; // get selection
    alert (sel.length + " items in current selection.");
  
    // make clipped group of die with art inside
    if (sel.length==2) {// continue only if 2 objects are selected
    var igroup = idocX.groupItems.add(); // add a group that will be the clipping mask group
  
    var imask = sel[0]; // the mask is the object on top
    var ipath = sel[1]; // the "drawn object" is at the bottom
  
    var idup = imask.duplicate(); // duplicate the mask, to later get the fill and stroke to apply to the clipping path
  
    ipath.move (igroup, ElementPlacement.PLACEATBEGINNING); // add both path to the group
    imask.move (igroup, ElementPlacement.PLACEATBEGINNING);
  
    imask.clipping = true; // make the mask the clipping path
    igroup.clipped = true; // clip the everything in the group to the clipping mask
  
    if (idup.filled == true){
    imask.fillColor = idup.fillColor; // add fill color, same as the dup
    }
    imask.stroked = true; // stroke the mask
    imask.strokeWidth = idup.strokeWidth; // add stroke width, same as the dup
    imask.strokeColor = idup.strokeColor; // add stroke color, seme as the dup
  
    idup.remove(); // remove the duplicate
    }else { // show this message if other than 2 objects are selected
    alert("Select both, the Mask and the object that needs to be 'inside'.\rThe Mask needs to be the top most object.");
    }
    app.executeMenuCommand ('deselectall');
    igroup.move (l1, ElementPlacement.PLACEATBEGINNING);
    }
    }
    }
  }
  trLyr.remove();
  

  Inside of my plu script that it breaks in silence, in this example script is for me a 'no such item. There should be such an element, I just put there. Once the script completes, the Group has been moved, which means that the named path is right where it should be.

  Let's see if this works:

  #target illustrator
  function test(){
      if(app.documents.length < 1){
          return;
      }
      var doc = app.activeDocument;
      var lr = doc.layers[0];
      for(var i=0; i		   

• How to import a layer that will have the same place and size that I have chosen?

  I have a lot of web to create files.

  All the products I have, can be chosen in 8 different sizes. And for each product and sizes, I need to put them in a room set file and then save it as a web file.

  or 10 products = 80 different web files.

  Each product to a particular size should be placed in the same area in the game room and have the same effect.

  For this, I have:

  1. create a bedroom set

  2. create models with sizes right for products to be included in the entire room (up to 8).

  3.I have created a series of actions for all sizes. Size of the image including the canvas size and export to a folder to have a layer for each product sizes.

  4.I need then to charge batteries to create a group and drag - move these files to the whole of the room.

  5 then I paste effects on all the layers in the group.

  6.I moved all layers in the right place, as a result of my models.

  So, I would avoid some steps of this... Because I have 100 products, so 800 files to create.

  If I can find a way to import (swap file one by one in the same place and sizes, she will avoid steps 3, 4 and 6, which will make my life much easier...)

  NB. Or remarks that helps...

  Hope this is not too complicated... and thank you for your help

  Jean

  If I understand correctly, you already have a common framework for all 100 products.

  For each product, you already have 8 image sizes to be placed in the parameter.

  If this is the case, the Variables can be the most convenient option that, once the model and tab delimited file are created, the placement of all the images of 800 would we automatic, accurate and extremely efficient both. Even if you work with images, I suggest rather than images and the type you watch the video and look at how it can be applied to your project.

  PS CS5 - working with Variables | The complete picture with Julieanne Kost. Adobe TV

• Filter effect and layer the layer in the same Style vs the separate layers

  I set a photographic image and uses both a filter effect and a layer style in the same layer to a smart object.  I want to separate the two effects in two layers, one layer has the effect of filter (Nik) and a layer is the layer style (Chromakey) (in order to merge/pixelation unmerged Nik filter effect with the smart object but keeping the layer style).  I can make two layers and move an effect without problem, but the Visual result of each effect on a separate layer is very different for these two effects in the same layer.   For all my layers blending Mode is Normal.  In the color overlay Panel, the blending mode is linear burn.

  I don't understand why the Visual result is different.  I'm not an advanced user of Photoshop, so maybe I'm missing something.  It is a trial of CS6 I use.

  Layer 1: layer style and a filter effect, stacked

  looks very different from...

  Layer 2: a layer style

  Layer 1: a filter effect

  If you want two separate layers, and then click the layer duplicated with the color overlay layer style you can try different layers, blend modes.

  For example, below is looking the same the Chromakey with linear burn on the second layer and change the blending mode of layers in Hue.

  

  You can also put the layer in a group and apply the layer for the group style.

  

  (I deleted the previous post because of the pilot error)

  Post edited by: R_Kelly