How know when an Oracle table has been updated last time?

Similar Questions

• How can I know if an external drive has been used for Time Machine and what computer it came with too?

  How can I know if an external drive has been used for Time Machine and what computer it came with too?

  I have several laptops and iMacs. I spent the relocation of the year and only used the MacBook Pro.

  Now I'm trying to figure out which drive goes with which computer

  I connected just a disk seagate 1.5 t and the first thing he did was to ask if I wanted to use it as a Time Machine drive.

  (1) if it is the TM disk accompanying this computer don't would not it have just started upward automatically?

  (2) what happens if I would have said yes?

  (3) I don't even know if it's been activated for TM. Is there a way to tell? It may hold just for iMovie files and other programs associated with a computer from my past.

  All readers of backup Time Machine contains a folder named: Backups.backupdb. If you open this folder, you'll find another folder with the name of the computer that has been saved. If several computers have been saved on the same disk, you will have several folders.

• When a table has been updated

  Hello
  in 10g, how see when a table has been finally updated?
  
  Thank you.

  Take a look at this post

  http://blog.tanelpoder.com/2009/02/07/when-was-a-table-last-changed/

  Coskan Gundogar

  http://Coskan.WordPress.com

• How do I know when a submissive app has been approved by firefox os market?

  Presented an application on the market of firefox as a developer, I don't know if it was still approved. How will I know when it will be approved?

  Hello, when you login to your account to developer at https://marketplace.firefox.com/developers/ and go to your presentation, you should see a menu "status and Version", which contains information about the State of the review process.

  https://developer.Mozilla.org/en-us/marketplace/publishing/submit/overview

• List of dates when the Fire Fox has been updated

  I am a tester and would like to know the version of Fire Fox which is applied on a day. I don't want to have a date in mind. I would be useful to have a table when the versions of fire fox have been launched. Then, looking at a date, I would be able to find the version of FF, which was used to test this day here.

  Hello, maybe this site will help you: https://wiki.mozilla.org/RapidRelease/Calendar

• How to determine if a table has reached the end

  I use a recursive list of files with a loop for. This in the end is a table, and I want to lnow when the files table has reached the last file if I read them one by one, without deleting them.

  Maybe I don't understand, but if you connect to a loop and indexing is enabled, the loop stops when the last element indexed, just wire the number of loops.

• When a table has been removed

  Hello

  in 9i, is there a way to know when a table has been removed?

  Thank you.

  user10274093 wrote:

  Hello

  in 9i, is there a way to know when a table has been removed?

  Thank you.

  DBMS_LOGMNR

• How will I know if my computers security has been breached? __my owner asked me for my email address, then my computer stopped working, then offered to fix it and crossed the reg edit.

  How will I know if my computers security has been breached?
  My landlord asked me my e-mail address, then my computer stopped working, then offered to fix it and crossed the reg edit.

  How will I know if my computers security has been breached?
  My landlord asked me my e-mail address, then my computer stopped working, then offered to fix it and crossed the reg edit.

  Hé oddaz

  If you're really worried that your machine may have been compromised, try to back up your data, and then reinstall windows

  Walter, the time zone traveller

• type the email address wrong when I tried down has been loaded the serial number! He said now that the hab email was send already. How can I get my serial number now?

  type the email address wrong when I tried down has been loaded the serial number! He said now that the hab email was send already. How can I get my serial number now?

  A few changes/Verify account https://forums.adobe.com/thread/1465499 links that can help

  -e-mail https://forums.adobe.com/thread/1446019

  -http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html

• How know what the largest table of my oracle database?

  How know what the largest table of my oracle database?

  SELECT * FROM
  (
  SELECT
  NOM_SEGMENT,
  SEGMENT_TYPE,
  BYTES/1024/1024 MB
  TABLESPACE_NAME
  Of
  DBA_SEGMENTS
  WHERE
  SEGMENT_TYPE = 'TABLE '.
  ORDER BY DESC 3
  )
  WHERE
  ROWNUM<=>

• How to determine if an exe has been installed?

  Gurus:

  I have Windows 7 and Norton-Anti-anti-virus/firewall.

  I came across a strange pop-up message when I logged in to my computer today. A pop-up window, said that "do you want to install \SYSWOW\MAClean.exe (not sure the path or the name of the exe)? While I was doing research on it using another computer, he disappeared. What is one-sided, I don't think any exe with MA*.exe in the computer. My computer also seems to be suspended during indexing - it connects normally - no delay - if I remove the wireless connection. other times, he connects very well, even with the wireless connection is ON.

  My questions are:-

  (1) how to determine if an exe has been installed ("I see not all facilities in uninstall it or change of program" window in the control panel)?

  (2) is it possible to list out all messages 'Alerts' or 'Popup' that appears on the screen?

  Best regards

  San

  HI San,

  Thanks for posting your question on the Forum of the Microsoft community.

  This can happen if the corresponding .exe file is associated with a program that is installed on your computer. To check the instance of the file, you can check in the list of programs and features in Control Panel. Apart from this, it can be due to an infection by the virus.

  To know different alerts and notifications, you can open the Action Center in Windows and check important notifications or the needs of Windows to accomplish tasks. To do this, please refer to the following location: Start > Control Panel (see: large icons) > Action Center.

  Also, you can also check error messages in the event viewer for more information.

  (Click Start, type Event Viewer in the Start Search and press ENTER.)

  To check the program third party or service by giving pop-ups/alerts, you can start the computer in a selective startup with no third-party software in operation. This process is known as a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  In addition, if your computer hangs or crashes often, I suggest you to try the steps from the following link.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  http://support.Microsoft.com/kb/2681286/en-us

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this information is useful. Please post for any further assistance.

• How long does take to reactivate the subscription once payment has been updated?

  So I've recently updated my payment of only a few days after my subscription expires. The pop-up when I went to use one of the applications said wait 15 minutes once the payment has been updated. I was able to do this but still cannot access my applications. It is time sensitive, I have a project to be completed within 24 hours. No one knows how long takes of reactivation of the account?

  Hello

  If the subscription has expired and then the payment details have been updated so it may take 24 to 48 hours to reactivate the subscription.

  See, survivor or restart your creative cloud membership , manage your creative cloud membership

  To get this dinner quickly I would recommend you to contact support by phone or Chat team.

  Contact the customer service

  *Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.

  Let us know if that helps.

  Kind regards

  BANI

• How will I know if my magic keyboard is in charge? And how know when it is done load so I can unplug the charger of lightning?

  How will I know if my magic keyboard is in charge? And how know when it is done load so I can unplug the charger of lightning?

  I remember reading that the charging time is about two hours.   If you have exhausted the battery it may well take longer.    After the period of two hours, he must run for about a month in any case if you could take the charger after 2 hours.    But I remember also as statements using the old MM1 mouse with rechargeable batteries Apple and stand-alone charger.    MIne has quickly reduced by about 14 days and now its down to 7 days.

• If I get a data execution prevention message, how can I find which program has been interrupted?

  If I get a data execution prevention message, how can I find which program has been interrupted?

  Hi Robhofm,

  Usually the Data Execution Prevention (DEP) automatically monitors Windows programs and services. You can increase your protection by having DEP monitor all programs.

  For the program being stopped by DEP, you will receive an error message indicating the cause of the stop and the name of the program.

  For more information you can consult.

  Data Execution Prevention: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/data-execution-prevention-frequently-asked-questions

  See also:

  What is Data Execution Prevention?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-data-execution-prevention

  This refer below link provided to change the DEP settings.

  Change Data Execution Prevention settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settings

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• How to make reference to what has been activated in a TileList using an ItemRenderer

  Hello

  I have a Tilelist component and I use an ItemRenderer, which is a button.

  I do not understand how to refer to what the user has clicked. So, if the first tile (which is the first Explorer) is checked, how can I know that that an individual has been clicked.

  < mx:TileList

      id ="myTL"

  dataProvider="{myAC}"

  Width="400"

  Height="400"

  ='2' columnCount

  number of lines='2' / >

  < mx:ArrayCollection id="myAC">

  < mx:Array >

      <mx:Object id="first" label="1" />

      < mx:Object label="2" / >

      < mx:Object label="3" / >

      < mx:Object label="4" / >

  < / mx:Array >

  < / mx:ArrayCollection >

  ItemRenderer:

  "" < mx:Button xmlns:mx = "http://www.adobe.com/2006/mxml"

  Click = "Alert.Show ("this was clicked') '> "

  < mx:Script >

  <! [CDATA]

  import mx.controls.Alert;

  ]]>

  < / mx:Script >

  < / mx:Button >

  Thank you.
  -Laxmidi

  Hi Laxmidi,

  Using the itemClick event you can do this by using the event object. See the code example below:

  <>

  xmlns:MX ="http://www.adobe.com/2006/mxml" > ".

  Import mx.events.ListEvent;

  Import mx.controls.List;

  Import mx.controls.Alert;

  Import mx.events.ItemClickEvent;

  private function onItemClick(event:ListEvent):void

  {

  var strAlert:String = "line of the Index Clicked element:" + event.rowIndex + "\n"; "."

  strAlert +=

  ' Column Index Clicked element: " + event.columnIndex + "\n";". "

  Alert.Show (strAlert);

  }

  ]]>

  Click = "http://www.adobe.com/2006/MXML Alert.show" ( 'It was clicked') ">"

  Import mx.controls.Alert;

  ]]>

  You can also try this by writing the Click event on the button in the TileList as itemRenderer where you can easily access the itemClicked data easily using the data object.

  Thank you

  Jean Claude