List of dates when the Fire Fox has been updated

Similar Questions

• You can restart AE comp in the queue that has been updated?

  Whenever I have reset the status after changing the comp in AE and savings, it seems to "remember" the comp in the State, it has been added to the Media Encoder. I don't understand how this is useful at all. It would be much better if I could have all my comps saved in Media Encoder and then I could just fire and code once I updated my work. Have to select the output folder and rename the output file when we work on 40 + restores at the same time is a waste of time.

  Am I missing a piece of workflow for this?

  After making changes to a composition in After Effects, you must choose Composition > add to the Adobe Media Encoder queue again.

  When you use the add to the command of the Adobe Media Encoder queue, After Effects takes a snapshot of the current state of your model. This snapshot is saved in a file temporary .aep, and that's what Adobe Media Encoder uses for rendering.

  The advantage of this workflow is that you can start the version of your model rendering, and then continue to work on B while version than version is rendered.

  Another way to add After Effects compositions to Adobe Media Encoder is to choose file > add After Effects Composition. In this dialog box, you can choose the initial project of the source, and then select one or all the comps in this project to add to the queue.

• Reports errors constantly pop up - even when the error report has been disabled

  An error report windows advising me that "Avira Anti Virus Premium Edition 9.1 has stopped working" continues to appear every few seconds. I don't remember ever install Avira Anti Virus, nor appear on my list of programs when I tried to uninstall it through the control panel. I went in the reports on the problems and Solutions and reporting disabled, but now the window which opens just sounds different.

  I can barely use my computer for this reason. Help, please.

  Hi Tony Spamoni,.

  First of all, try to make an analysis online on your computer to check.

  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Then run Avira antivirus removal tool to remove Avira Antivirus from your computer.

  Antivirus removal tool
  http://www.Avira.com/en/support/antivir_removal_tool.html

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Until the latest update when the AutoComplete bar has been selected, he "went" no other by clicking. I must now click the refresh arrow. It won't work even with the return. How can I operate the old way easier?

  Until the latest update when the url I wanted in the address bar of AutoComplete has been selected, it "accompanies" no more further by clicking on. I must now click the refresh arrow. It won't work even with the return. How can I operate the old way easier?

  You can disable this extension in tools > Modules > Extensions and close and restart Firefox normally.

• problem when the main server has been restarted

  Hi friends

  I have little problem with my main server

  If I reboot the server as updates or anything else all the VM off and I should do to work (manually)

  I need a solution to run virtual machines if the main server was reboot (automatically)

  I need this solution for automatically restarting the server for updates... etc.

  respectfully,.

  Michael

  Are the services on the host VMware starts does not automatically or the guests themselves? If these are the services on the host computer, which is the host operating system? Windows hosts must have all the auto-start services, but may have problems if the data store that contains the virtual machines is not accessible at the seed stage, when the VMware services start. In this case you may need to mess with service groups and orders to raise the datstore (e.g. If NAS) prior to VMware. A Linux host, it's probably because vmware scripts are not connected correctly on startup mechanism rc/init-sript or for some reason, he thinks that you need to run vmware - config.pl again once.

  If the guests, you have to get auto-start for the customers required as directed by the screenshot? If so, is there anything in the global or per-VM VMware connects to suggest what might be the problem? Make sure you have VMware tools installed in the guests.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• quick response of iOS for whatsapp works not when the alphanumeric password has been on iPhones

  Hello

  My question was, I was getting keyboard white with no key, just by doing a quick response to whatsapp messages, while the phone is locked and if the phone has been unlocked, it works fine.

  After a quick search, I found that in this case, on all iPhones (I was able to replicate on iPhone6s, 6 and 4S), regardless of the versions of iOS (as long as it takes in charge the quick response), while the phone has been set with digital access code Alpha and locked. If it's a digital password, quick response normally works with the good visible keyboard. From now on, I found that this happens only with Whatsapp Application. Can someone tell me what is an iOS problem or something which Whatsapp team need to check?

  (Also please check on your other app, instant messaging, if get you this error during the series with an alphanumeric password).

  Thank you

  Doudou.

  With the help of iPhone6S

  OS version: 9.3.4

  Since I have never heard of this issue with any other application and WhatsApp is not an Apple application, I suggest you address the problem with WhatsApp and see what they have to say.

• How know when an Oracle table has been updated last time?

  I want to find when the last INSERT, UPDATE, or DELETE statement is executed on a table (for now, in the future, I want to do it in several tables) in an Oracle database.

  I created a table and then I updated one of its lines. Now, I have the following code:

  SELECT ORA_ROWSCN * FROM test_table;

  SELECT SCN_TO_TIMESTAMP (ora_rowscn) in test_table;

  Copy the following code, show timestamps of each row, but from the point where they were created. The line I've updated, have the same time other stamps. Why?

  Can someone help me please?

  Wrong forum!

  As the forum title suggests, this forum is for SQL Developer questions and your question has NOTHING to do with this tool.

  Please mark this question ANSWER and repost it in the forum Sql and Pl/Sql

  SQL and PL/SQL

  Before repost you I suggest you read the ORA_ROWSCN Oracle documentation.

  http://docs.Oracle.com/CD/B28359_01/server.111/b28286/pseudocolumns007.htm

  Copy the following code, show timestamps of each row, but from the point where they were created.

  No - this isn't what he does this last link doc treats:

  For each line, ORA_ROWSCN returns the number of change of system (SNA) conservative upper limit of the most recent change to the line.

  If the value will be updated if a line in a block is changed.

  The line I've updated, have the same time other stamps. Why?

  The default is to BLOCK, not the level of the line level - there is only ONE value for the block. If a block contains 100 lines, they appear to have the same value, the value for the block.

  For tables defined with ROWDEPENDENCIES values are actually stored for each line.

  The * views _TAB_MODIFICATIONS will show you the last time a table has changed SINCE the statistics were collected.

  https://docs.Oracle.com/CD/B28359_01/server.111/b28320/statviews_2095.htm

  If you need more help or explanation post a new thread in the right forum.

• Satellite M40X-126: disk blocks when the DVD-RAM has been inserted

  Hello

  I have a laptop Toshiba Satellite M40X-126 with a super multi drive installed. I have a problem with writing to DVD-RAM. Sometimes, when I try to write data to a DVD-RAM disc, the DVD player makes a strange noise, as if the mechanic of material is blocked inside the car. The laptop will not write any data on him and he doesn't notch in this noise. And I can't open the drive, because it is blocked by the software. And windows is blocked as well, I can't do anything. The only thing I can do, is stopped the laptop by pressing the power on button a few seconds.

  I do not think, it is a software problem. I have installed all the necessary drivers (UDF) is installed correctly. And DVD - RAM writing runs smoothly most of the time. But I have every 5 times I insert a DVD-RAM disc makes it drive this strange noise and everything is blocked.

  My disc is damaged? Who has the same behavior?

  Thank you

  Reto

  Hi Reto

  I have the same drive, but it works without problem. I know that DVD-RAM media are expensive, but all I can suggest is you buy another provider and check if it will happen again.

• How to set preferences so that open new tabs to the same page that activates when the command-T has been affected?

  By opening a new tab, the default tab opens to thumbnails based on recent history. The Safari, I want the new tab to open * to the same page, as was active when command-T was hit *. What are the specific actions, to set the default value (preference), new pages to open 'same page '? ('Same page' is check in Safari preferences box).

  Note, I've sailed available Support of Mozilla and using about: config have reset browser.newtab.url so that the new tab appears empty (stop followed recent history for this purpose).

  Note, most importantly, I found this article of Support Forum, which, although written challenge, gave me a temporary solution:

    * https://support.mozilla.org/en-US/questions/891635
  

  (The temporary solution for the Mac OS is to command-click the icon 'Reload current page' in the url/address box in the browser toolbar, which opens a new tab in the same window).

  However, I would like to define this as a preference permanent and would ask someone give me a solution. Cheers, teacher

  LeProf_7272 wrote:

  if I can possibly just create a new config line
  

  You can't, that's why I suggested the modules above. There is no option in the user interface or preferably hidden in Firefox that can duplicate a tab whenever you open a new tab browser.newtab.url can only be set to a fixed address, what address is to be opened in the current tab.

  Are the only two built-in methods to duplicate a tab:

  1. Hold down the Option key and drag the tab to a new position on the tab bar.
  2. Hold down the command key and click the reload of the address bar.
  • Use mouse shortcuts to perform common tasks in Firefox

  You can make feature requests by filing development bug reports or by opening the Help menu by clicking on your comments.

  • https://developer.Mozilla.org/docs/Mozilla/QA/Bug_writing_guidelines
  • https://input.Mozilla.org

• Should I unplug the AC adapter when the Satellite L305 has been stopped

  Should I do this or not?

  When I stop my L305 laptop I unplug the power cord of the AC adapter. Or should I just let my laptop plugged in all the time.
  When this happens, their green light stays on all the time.

  Thank you, Richard...

  In General, you can do what you want. After finishing my work, I unplug the power from my laptop but not remove AC adapter / CC of portable but rather unplug the power to the electrical outlet.

• Blue screen on Satellite A200-18W when the 'FN' key has been enabled in Vista

  Hello everyone!

  I've had this very annoying problem for a few days now:

  Whenever I hit the "FN" button, I get a blue screen of death... :-(

  I restored the system to a previous restore point, and then did a scan of CCleaner and fixed everything, but the blue screen comes up again and again.

  I have an A200 running family vista premium, it worked like a charm until this problem appeared...

  Thanks in advance for any help you could give me.

  Sébastien.

  Hi Sebastian

  The problem is that it is not easy to say what causes this blue screen of death.
  The BSOD appears usually due to hardware or software serious misconduct.

  It was a good idea to restore the system to the point of beginning and use the CCleaner to fix the system.
  But it would be really desirable to use the Toshiba Recovery CD to recover the laptop.
  This allows to know if it s a hardware problem (motherboard) or only a software problem (driver).
  After using the recovery CD, the laptop should run without worries.
  If the BSOD will always appear then the chances are that the hardware is defective and the replacement could only help.

  Your comments would be appreciated

  Best regards

• Hi my internet firefox does not start, when I try a fire fox has stopped working Panel rises

  The following comes in my microsoft windows fire fox has stopped working the Panel, please help me im not great the computer but can follow directions, thank you

   

  Signature of the problem:

  Problem event name: BEX

  Application name: firefox.exe

  Application version: 14.0.1.4577

  Application timestamp: 5000b 729

  Fault Module name: LVPrcInj01.dll

  Fault Module Version: 11.80.1048.0

  Timestamp of Module error: 488b3c09

  Exception offset: 00006074

  Exception code: c000000d

  Exception data: 00000000

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 3081

  Additional information 1: cd21

  More information 2: 01d9174c762f08c4addf02cfdc2dd662

  3 more information: 5f3e

  Additional information 4: f33234e8bd4e4c7a45cfb8b872a5e602

  Hello

  For more assistance, please contact Mozilla Firefox.

  http://support.Mozilla.org/en-us/home

• ' The page you are trying to view cannot shown because it uses an invalid form or not support compression. ' This happens only in the Fire Fox browser.

  When I try to access sourcea.fr to check my account, after I get my ID and password a window opens with the message "the page you are trying to view cannot shown because it uses an invalid form or not support compression. '" This only happens in the Fire Fox browser.

  Hi BAMIRANGE,

  ·         You try to use Internet Explorer and check to see if you encounter the same problem?

  If the limited issue of Firefox then the number you posted would be better suited in the Forums of Mozilla Firefox. I would recommend posting your query using Mozilla's Firefox.

   

  Support for Mozilla Firefox

  http://support.Mozilla.org/en-us/KB

  Hope this information helps.

• When Photoshop cc supports raw files coming from the Nikon d5500 has been added?

  Hello

  When Photoshop cc supports raw files coming from the Nikon d5500 has been added?

  IAM a happy Photoshop user, specially for my files raw... I find it frustrated that I can't work on my files at the moment...

  Greatings Danny

  The d5500 has been added just launched and Adobe working on support. Can't say how long for sure, but it should be a month or two. Meanwhile, you can shoot in NEF + JPEG and set Camera Raw to open your JPEG files as well. Not much data, but will be better than nothing...

  Benjamin

• How can I identify the date when the last system restore was used to roll back the pc?

  Original title: how System Restore last used

  As the title suggests, how can I identify the date when the last system restore was used to roll back the pc?

  I can remove all restore points. I've used twice now the beta off Defender & he assures me
  the pc is clean Virgin.

  I have just got rid of a Trojan dropper & a Win 32/AmmyyAdmin. -(whatever it was!)

  I now seem to have acquired Windows Powershell along the way, gawd knows where!

  He was not here a few days ago and I don't have any idea where it is!

  What is it and should I be worried?

  Thank you

  Hello

  You can check this link:

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084