How limit the cache coherence specific servers in the cluster?

Similar Questions

• How does the cluster?

  Hi all

  I am subsequently helps him learn how to use the cluster to reduce the number of inputs/outputs, but it is quite confusing that how do you know which is which. It follows from the order, whether or not we have added to the cluster? I put a cluster contains 4 numbers DBL as an entry of my Subvi. I name the elements of each DBL as A, B, C, D. In the main code, I create a cluster contains 4 DBL and trying to feed on this cluster in the Sub - VI. But how do I know what number I feed in the main code is A, B, C and D?

  For example, I create a Subvi with the participation of a single cluster. The cluster has 4 numbers DBL named A, B, C and D.

  

  Now if want to feed a cluster in this sub - VI, I create a cluster and connect the 4 digits in this cluster. But if I use the bundle cluster, I need to connect the number in order thus to fill A, B, C and D. But if this Subvi was created by someone else, how can indicate the order of the elements in the cluster WAITED?

  First, you must give the elements of the cluster in the control Subvi the same names (A, B, C, D) as used in the VI call and also to ensure that the order of cluster is the same. If you are not sure fight the cluster command, you can reorder the items (right click) and select the desired command. And Yes, the initial cluster order is the order in which you have added the items.

  Generally, it is preferable that the cluster a typedef and used worldwide. This way to the typdef change is propagated to all the places where it is used.

  It is often more auto-documentent and cleaner to use together and ungroup by name. A constant of diagram of typedef wire upward 'bundle by name' to make the labels available.

• How to limit the rules (CPU usage) doesn't include a few servers (IP)

  Hello

  There are few servers who always raised processor and we do not generate alerts for servers, but we need to get the statistics of CPU in the FMS, is there a way I can limit the rules (i.e., the CPU utilization) to not stand for these servers.

  Thank you

  Shashank Soni.

  Hello

  You can change the definition of the rule to exclude certain hosts.

  In this example, we add a condition by saying that the does not apply to a specific host, or hosts.
  Note that you may need to replace the name of the property with the property that designates the host name.

  

  You can also check the host name in the status itself

  

  Another option you have is to find the variable being compared and it scope (give it a very high value for specific hosts.

  

  I hope this helps.

  Golan

• Same question "how to limit the story" old with FF 27.0.1

  Windows 7 Pro, FF 27.0.1, Adobe and Flash modules (and it's auxiliary)... just the basics. My box is a server as well as used for most ordinary tasks... mail, browsers, editors of documents, etc., is always 'on' and never 'idle '. It's the Add-ons that make these things why don't do anything on my box.

  It is, I know, is an old question, but outstanding, in my opinion. I revive this post:
  https://support.Mozilla.org/en-us/questions/799503?FPA=1

  First of all, let me say that I consider that the best time of the Firefox browser. I love the essential philosophy of Mozilla and Firefox customization by the user and the control, while respecting their need to ensure security and stability.

  OK, the issue is evident in the title, how can I limit history with Firefox? More recently, I observed when the activation and the deactivation of JavaScript in the preferences options has been removed. I have read the reasons of Bugzilla and Firefox and it was not difficult for me to open a topic: config tab next to a label containing a page I was working so I could see how the page without JavaScript. Once you know how, it was only a little more difficult that using the preferences options... which doesn't bother me really.

  The history limit is implicit in the browser itself, where, if you open the history window, you can see your history and (for me) see an option 'longer than six months' who, if you mouse over and right click will get an option 'remove '. I think that everyone who tries this blocking their browser and if something is deleted when you finally get to the top, it will be your cache.

  I know that the amount of history is set: config in the "places.history.expiration.transient_current_max_pages" as an integer parameter. Read many articles here in 'support' and personal judgment, I find that although the number can be increased, it cannot be decreased. If we do, it is up to the old definition as soon as Firefox is reopened.

  I read the blog referenced in the first link above: http://blog.bonardo.net/2010/01/20/places-got-async-expiration and it even seems outdated, containing references to places.history.expiration.max_pages, which is not the file in topic: config in 27.0.1

  In https://bugzilla.mozilla.org/show_bug.cgi?id=643254 , I read the debate on these changes where Marco Bonardo held firmly at his post while I find the comment of al_9x, discuss the issue with him. "You have removed features that people use and love, that been in Fx since its inception. It is you who need to justify deletion. "And your justification of" nobody really wants expire history "is a lie, people do and I explained why", to represent my feelings completely. I have no need or desire for the history of more than 3 months. It is tyrannical to limit the ability of Firefox users to limit their history. And no.... I have not create yet another account of Mozilla and 'vote '.

  There must be a way I and other users can limit (or increase) their history. So I ask "how?" This is, by design, to do this then I find a very disturbing trend, away from the philosophy of the user control and customization.

  If I'm missing something, please let know me. Please * don't * send me a bunch of standard items 'aid', because I read all. That is my question.

  Kind regards
  Axis

  You must create a new pref to around places.history.expiration.max_pages if you want to change the default behavior.

  • http://MXR.Mozilla.org/Mozilla-release/source/toolkit/components/places/nsPlacesExpiration.js#45

  You can watch the extension that I posted at the bottom of my answer above.

  • https://addons.Mozilla.org/firefox/addon/expire-history-by-days/

• How can I limit the size of a batch of e-mail for the campaign to the warming of the intellectual property?

  We were working on our campaign 'Heating IP' for our first promo and we must limit the number of emails we send per day by Eloqua. I can't understand how to do this. I looked at Eloqua along, but I had no chance.

  I found something called 'Email Batch Control' in the Setup menu, but I don't see any way to use it for, well, control and orders by e-mail.

  Any help would be greatly appreciated. Feeling a little lost...

  Thank you.

  Hi Rob,

  You can do this in the program generator, specifically e-mail stage.  What you do is click on the drop down next to the stage of e-mail, go to "change the default step action", according to the details of "frequency", you have an option to send emails all at once or spread it in batches on a certain number of hours or days.  You would like to to be.  Now, regarding the mathematics behind it, if you load 1000 contacts in your program and the value that it be sent in batches of more than 6 hours, what he does is total-contacts / # in the batch, IE; 250 emails sent every 6 hours.

  In the case of your post, you may mant to divide on a course of a few days.

• How best configuration connect display server and composer to limit the single point of failure?

  Hi all

  
  Just had a few quick questions:

  1.) how everyone is to limit the Connectoin Server view to a single point of failure.  All the reading I did looks that everyone puts in place two servers connectoin and doing DNS round robbin on it or put two servers behind a load balancer connection

  (2.) what happens if the mode to connect to the server disconnects while users are connected and actively using desktop computers?

  3.) how to protect View Composer of single point of failure.  It seems that most people are installing this on there vCenter server and everything by leaving it with VMware HA.

  (4.) what happens if View Composer breaks down and you have Active Desktop sessions used by users who are linked clones

  (5.) what is the login used for replication partner server view?  This is a new feature in display 6 that creats a form any cluster to the login server?

  
  Let me know,

  
  Thank you

  1. Yes. Need a load balancer. Something better than a round robin DNS since those who go ping (response from the host)-based and not necessarily whether the service is in place (port 80/443 replying with 404)

  2. the user disconnects. When the reconnection that they continue where they left off.

  3. just about everything. Also ensure that regular backups are performed by the login server. Don't forget that if you need to restore, to restore a backup SQL composer both AD LDS.

  4 should be fine. The only problem is during commissioning, a linked clone or create a delete. Then could be a problem. Updating should be ok

  5. a replication partner? Do you mean the replica server? It's just an identifier during the installation as to whether, during the installation of the connection to the server, create you a new instance of the view or expand an existing one. He ends by as a peer to other servers to connect in the same instance (POD).

• How to limit the visibility of the GSM Spec

  Hello

  an our client ask us whether it is possible to limit the visibility by business unit for the Specs of the wording, but not for other GSM specifications.

  for example: a user should be able to access all materials (BU 'A', 'B', 'C'), but can access the formulation in BU 'A' only.

  I thought to divide the workflow of formulation based on BU.

  In this way, we have to create:

  1 wf for formulation in BU 'A '.

  1 wf for formulation in BU 'B '.

  1 wf for formulation in BU 'C '.

  1 wf for formulation in BU 'A B'

  1 wf for formulation in BU 'A C'

  1 wf for formulation in BU 'B, C '.

  The problem is that we have 7BU and this way, to create a workflow for each combination of BU (too)

  Is there another way to restrict access to the GSM Spec?

  I hope my question is clear, otherwise do not hesitate to contact me.

  Thank you very much.

  Best regards

  Stefano.

  
  

  Can you provide the business case for use around this problem so I can understand how you are eager to take advantage of business unit?  It may just be a different way of thinking about the business organizational unit.  For example, you can set up your business as follows unit structure:

  Formulation

  > A

  > B

  > C

  Material

  > A

  > B

  > C

  There may be some minor usability, but these concerns can be solved with future improvements of the user interface or UI extensions.

  ----------------------------------

  The information that I have, and if you do not want to reorganize your BU you could do the following:

  1. give the user access to BU A, B, c in the UGM so they will be able to see the materials in their search results.

  2. use visibility Tags in your model of formulation of CCA to hide formulations BU B and C of the user in the search results

  3. use our extension of veto of specification plugin to restrict read access to the sheet of formulation based on business rules.  Our right of veto plugin allows you to restrict access to any user based on specific rules.  For example, even if the user has access to A, B and C, they still would not be able to open the specification because it is a language specification and they are not in Group X.   You can even get fanciful, if the user only has read access to all specifications of the child, then they cannot open the spec parent etc.

  If your rules are simple, then this may be the easiest to manage.  It really depends on how predictable and simplistic your access rules are. You can learn more about our veto spec plugin extensibility Guide.   You can learn more about the tags of visibility in the white paper EQT visibility with our other user guides.

• How to limit the messages to a recent period in separate folder

  I use Thunder manage may email on the server using POP 3 and use the filter to separate different email to a different in thunderbird folder for example folder and folder b. e-mail on file B not of equal importance, so how can I limit the messages to recently in this case B only and keep all the email in the folder.

  If possible, please tell me how can I do.

  Thank you

  So no need to have a way of selection more old emails and moving them to another folder emails filtered in folder B.

  Options depending on where you want the old emails folder B to go:

  If you want to remove all copies stored on server, shut down the computer:
  Implement a strategy for retention of file B.

  • Right-click on the B file and select "Properties".
  • Click on the tab "retention policy".
  • Uncheck the "use my account settings.
  • Choose an option, for example:
  • Select: "delete messages more than for example: 30 days '."
  • Click on 'OK '.

  If you want to archive emails - these emails will be always available via Thunderbird under the folder "archive".
  Configure the options of the Archive:
  "Tools" > "Account settings" > "Copies & folders" for pop e-mail account
  or
  Right-click on the name of the e-mail account in the folders pane, and select: "settings".
  then select 'Copies and folders' for pop e-mail account.

  in virtue of section "Archives of Message"

  • Select: ' Keep message archives in. "
  • Selection: Account name "folder of Archives on ' mail
  • Click on the button' Options of the Archive «»

  Depending on how many emails do you get select one of the following:

  • If a lot of e-mails select; "monthly archived folders."
  • If a reasonable amount, but not load, then select: ' year archived files.

  If you want to keep the existing folder structure:

  • Select: "keep the structure of existing records of archived messages".

  For example, if you check the "Sent" messages, you can the separated in the file Archive, showing in a "Sent" folder
  Archiving is useful to move all old messages from any folder, so that you have more space in the original folder.

  • Click on ' OK
  • Click 'OK' to close and save the account settings.

  How to archive:

  • Click the folder B
  • Sort by Date and bored
  • Highlight a selection of old messages - click the first, press and hold the 'shift' key and click last - this will highlight all the emails in the meantime and show as 'conversations' in the lower pane of the Message.
  • Click the "Archive".

  Note: If you select any email or email batch and press 'A' - he does these emails. "A" key is the keyboard shortcut for archiving of selected messages.

  Manually run a filter on the B file.
  Tools > Message filters

  • Click 'new '.
  • Give an appropriate filter name
  • Apply filter when - choose only: "Execution manually."
  • Select "scale to all that follows."

  For example use the terms/rules:

  • "Age in days" and "is superior to" and select a number for example. 30

  Perform this action

  • "Move the message to ', then select the file on the email account and local folders.
  • Click OK
  • then activate this filter and disable the other filters
  • Select: "run selected filters on" file B "in the e-mail account."
  • Click "Run now" to run this filter on the single folder B.

  I offered a few options for you to consider.
  Personally, I would use the 'Archives' option, but it depends on what you're trying to reach.

• iPhone 6 How increase the built in the volume of the speaker above the ordinary limit?

  iPhone 6 How increase the built in the volume of the speaker above the ordinary limit?

  I use the phone as a hands-free device and the volume is not strong enough by the speaker button.

  The person I'm talking to can hear me very well...

  If you are on a call tap the speaker icon to switch to the speaker at the bottom on the phone.

• How can I limit the number libraries which is to find Photos

  How can I limit the number libraries which is to find pictures?

  I have about 10 libraries I've migrated opening today.

  I followed the advice I got from leonie, (level 10) below.

  Photos will create a new library of Photos in your iPhoto library.  The new library will be named as the iPhoto, with the extension ".photoslibrary" library and your original library will have a new file name extension ".migratedphotolibrary".  Rename the resulting ".photolibrary", so you will always be able to open in Aperture. The icons of libraries will change also. New photo library will display an icon of 'fan photos' with the flower of the Rainbow.

  
  

  So, I have now two files in my folder "Images".   One is called "Photo library" (these are ALL of .photoslibrary) the other is 'BACKUP ONLY iPhoto libraries' (these are ALL of .photolibrary).

  When I hold down the option key and start the Photos is to find all the libraries of two files above. How can I say Photos don't not to look in the old folder "iPhoto library"?

  This isn't a feature of Photos

  You can request that Apple itself - http://www.apple.com/feedback/photos.html - but not, it is not an option

  LN

• I would limit the window to the same size as my site... How can I do this in Firefox?

  I would limit the window to the same size as my site... How can I do this in Firefox?

  Sorry, this is not possible more in Firefox, with the exception of the pop-up windows that opens a website, and which can be overridden by the user with a simple preference setting in the Options.

  Users cannot change or set the window size in their own browser from the URL bar any longer, they do so through the notebook in the Web Developer menu under the Firefox button.

• How to limit the length of the texts on iOS9?

  Hello

  I just worked on why I am required by my mobile / cell phone provider EA.  They charge any text as a picture message / SMS, it is longer than 120 characters?  Does anyone know how to limit the length of the texts / SMS so that it is impossible to send a more 120 characters or create an alert so that you are aware of the number of characters in the text / sms?

  Thank you very much

  Hello Turnus123,

  Thank you for using communities of Apple Support.

  I see that you will have to pay for SMS more than 120 characters.  To help identify messages exceeds this amount, you can activate a number of characters in the message settings.  Simply go to settings > Messages and activate "number of characters".

  Message settings

  Take care.

• I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  Set a password to disk... disk tab in the utility... and just give to those you want to use the TC...

• How to limit the display of messages (Gmail iPhone 6s)

  Hello

  I want to limit the number of messages displayed in the 6s now, iPhone Mail application that all my messages are displayed.

  I synced a Gmail account, but in preferences, there is no "mail days to sync". This option is available on the iphone from a friend with an outlook account set up 5.

  Does anyone know how to limit these messages to a Gmail account in a 6 s iphone?

  Thank you

  B.

  The ability to determine how many days to synchronize e-mail is available for Exchange accounts. There are no settings like this for POP or IMAP accounts.

• How is it possible to specific your own, with the constant help of string to locate a directory where the NEW

  How is it possible to specific your own, with the constant help of string to locate a directory where the NEW
  created the folder to save?