How much is needed to run Vista >

I; am working on a friend of mines, portable a Presario v6000with an AMD Turion 64, I just wanted to know if 1 GB is enough running the operating system is up to this cruise, with no attached devices, but according to the specifications, it can handle 2 GB of ram. 13O13E

1 gig is "feasible", but it could be pushed to the limit quickly, particularly playing video games etc.

I'd go for 2 gig, at least. This is my personal opinion. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

Tags: Windows

Similar Questions

  • DVD how much we need for the files backup with backup and restore program?

    Hello how are you?
    DVD how much we need for the files backup with backup and restore program? Y at - it large differences in the time and space between write backups on DVD and external hard drive?

    I do not understand your question.  Asked how the space has been used on your C: drive and you answered 60 GB.  Now you say your PARTITION C: is 60 GB with only 20 GB used?  I really don't understand what you're so confused.  It's simple arithmetic grade 3rd.  What is space you USED on the C: drive, that multiply by 0.7 to obtain the amount of space will be used on your backup disk after compression.  Divide this number by 4.7 and round.  That's how many DVDs you'll need if you insist on the use of DVDs for backup.  Then

    (1) If you are using 60 GB, the answer is (60 x.7) / 4.7 = 8.936.  I rounded up to 9 and added 1 just to be sure.

    (2) If you use only 20 GB, the answer is (20 x.7) / 4.7 = 2.97 rounded up to 3.  Add 1 and get 4.

    If you use only 20 GB, I am very surprised, because almost any important installation of Windows 7 is going to take more than 20 GB.

    All of this assumes that you do NOT use the Windows backup and restore program, but one that I recommended.  When I used the windows one, the results were several times the space that I used on my C: partition.

    Good luck.

  • How to change laptop Gateway running Vista touch pad sensitivity?

    I have a laptop Gateway running Vista.  My problem is that when I try to use the touch pad, the screen jumps all over the place.  As if I was scrolling up or down very quickly.  Any ideas? Thank you

    * original title - help help my screen jumps *.

    Hi M.MARRIN,

    ·         If it works much earlier? If so, then remember to make changes to the computer, after which the issue started?

    If you run your finger vertically down the outer edge of the touchpad and then the scroll bar will be activated. If you do not want to use the scroll bar or if you want to reduce the sensitivity of the scroll bar, then you can try to modify the settings of the mouse. Take a look at the following link for more information or take a look at the manual that came with the computer and check how to change touchpad settings:

    Change the settings of the mouse

    I hope this helps.

  • How much will cost to upgrade Vista to Windows 7?

    I got the license for Vista and now I want to install Win 7 how much I pay for the license

    * original title - changing from Vista to Win7 license issues *.

    Windows 7 upgrade paths
    Microsoft has released a downloadable document from MS word with a list of paths to upgrade to Windows 7.
    http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=e170eba1-5bab-401F-bbf5-00f0ee7fe0fb

    Note: The 'Upgrade' from Windows 7 version you are the owner requires a previous version (and ligitimate) from Windows XP or Vista. If you do not meet these requirements, then you must purchase a full version of Windows 7.

    Windows 7 Home Premium Upgrade Update: $119.99
    Windows 7 Professional upgrade update: $199.99
    Windows 7 Ultimate Upgrade Update: $219.99

    Windows 7 Edition home full Premium: $199.99
    Windows 7 Professional full: $299.99
    Windows 7 Ultimate Full: $319,99

    Windows 7 upgrade paths
    http://TechNet.Microsoft.com/en-us/library/dd772579%28WS.10%29.aspx

    Decrypt Windows 7 upgrades: the official rankings
    http://mossblog.AllThingsD.com/20090804/deciphering-Windows-7-upgrades-the-official-chart/
    (Save the graphic, and then open it using a photo editing software or Viewer to expand to a size more readable)

    Which is right for you?
    http://Windows.Microsoft.com/en-us/Windows7/products/compare

    List feature that provides each edition of Windows 7:
    http://www.SevenForums.com/tutorials/14422-compare-Windows-7-editions.html

    Windows 7 Professional upgrade - Vista owners: be aware that the upgrade to Windows 7 Professional can be used only to perform a upgrade in place for computers that have Vista Business Edition. Unfortunately there is no indication on the box or retail in the EULA/license restrictions of invalid paths to upgrade to Windows 7 Professional.
    http://www.PAGESTART.com/windows7proupgade.html

    Users of Windows Vista Home Basic Edition, your choice of upgrade: Windows 7 Home Basic Edition, Premium 7 or 7 Ultimate
    Users of Windows Vista Home Premium, your choice of upgrade are: Windows 7 Home Premium or Ultimate 7
    Users of Windows Vista business, your choice of upgrade are: Windows 7 Professional, Ultimate or Enterprise edition
    Users of Windows Vista Enterprise: only one way upgrade of Windows 7 Enterprise
    Windows Vista Ultimate users: once again as a way to upgrade Windows 7 Ultimate.

    J W Stuart: http://www.pagestart.com

  • virus protection how much I need.

    The few times that I downloaded the elements of the internet as a browser, it comes with spyware [immunet, etc.] Should I keep all, can I just count on 1 as avg to protect everything.

    You should have one antivirus application that runs continuously in the background.  You can have several (MalwareBytes AntiMalware, SUPERAntiSpyware) antimalware scanners but free versions (which are all you need) only the scan on request.

    I like eSet NOD32 Antivirus (not more), but it's not free.  In addition, he had a few problems when version 5 is released, even if they seem to be fixed now.

  • How much GB needed the PEN USB for 'Back up and recovery' flash on the new Windows 8/Dell 3521

    1. I'm about to buy a new Windows 8/Dell and I need the answer above to implement.

    2. I have documents and photos on a separate USB Flash Pen, I want to copy in Windows 8/Dell. How it works, please?

    3. If I opt to connect again Windows 8 with the Local account, what applications will be excluded.  I have a microsoft also account, but I prefer the Local account sign in to the.

    4. stupid question, but not Windows 8 come with folders "My Documents" and "My Photos" already installed or do I need to create those myself?  I looked at several tutorials, but I'm not clear on this issue.

    Hello.

    1. According to the website of "create a recovery USB disk", it is usually between 3 and 6 GB, 8 GB USB key should be a lot.
    2. To copy your photos and documents to Windows 8 of your flash pen, simply plug the flash drive, open Explorer (shortcut +E) and drag - move the files in the folders of photos and documents.
    3. With the help of a local account prevents you from using OneDrive for backups of files online and save your settings.  I recommend creating a local account first, and then 'connect' to a Microsoft account.  In this way, you get all the benefits of an online account without sacrificing your local account, and you can always disconnect it later without affecting your local account.
    4. Yes it is safe.  These folders are in the same place as usual (under C:\Users\YourName), but they appear also as shortcuts when you open Explorer, to facilitate access.
  • Question on licenses and how much I need

    So I was counting on VMware vSphere with the standard management of operations of purchase and I have two servers. I have to buy for each server? Or do I just need one time and after that buy vsphere standard for all my other servers? I guess what I'm asking, what if I want to report on all my servers that can do the operations management. Do I need to purchase the edition above for each server? Or is it just a one time cost for the software? Thank you.

    You must purchase a license VSOM (i.e. "with Operations Manager") for all the hearts that will be the host of virtual machines that you want to monitor with the component of operations manager.

    In other words, you have no right to monitor virtual machines that are running on servers without license VSOM.

  • Registry Cleaner deleted files needed to run Vista

    original title: Registry Cleaner Messed Up Vista!

    Well, I ran a registry cleaner on my Vista computer. Now, it has removed the elements of my system I guess it shouldn't have. I can't do anything. I try the system restore, but it doesn't have the necessary files for it or something. It does not connect to the internet. When I try to reinstall vista it says also the information on disk is not found. So I'm really worried now. Can someone help me please!

    And now you know why the registry cleaners are bad. If the program has an undo feature, use it. If it is too late for that, back up your data and do a restore clean factory/install of Windows. If you tried to do a factory restore (if that's what you mean by "try to reinstall vista [translation]... the information on disk is not found") and it fails, the registry cleaner probably destroyed the original hard disk image. Communicate with technical support of computer mftr. and the purchase of recovery disks. This is normally not very expensive. And do not use Registry cleaners/optimizers once again.

    http://aumha.net/viewtopic.php?t=28099 - thread registry cleaner
    http://Lifehacker.com/5482701/whats-the-registry-should-i-clean-it-and-whats-the-point

    MS - MVP - Elephant Boy computers - don't panic!

  • How much room for bleeding?

    I wonder how much I need for bleeding during printing of the piece.

    healingandfire.jpg

    the guy above me said. but a common standard for most printers is 1/8 "to 1/4"

  • How much space do I need to allow for Vista while partitioning the hard drive?

    How much space do I need to allow for Vista while partitioning the hard drive?

    I am installing on a new drive hard and need to partition the hard drive.

    I remember he had a certaing amount allocated for vista and before recovery.

    Help, please!

    Hello

    40GBs is the minimum; who will be vey quickly useless.

    Recovery partition would have been photographed by the manufacturer of the computer hard disk and you can't replicate that.

    You can use all of the hard disk space available to install Vista on.

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • How to integrate windows vista with service pack 2? I need to run an inplace upgrade.

    How to integrate windows vista with service pack 2? I need to run an inplace upgrade. I have a corrupt installation of SP 2 and I can't uninstall SP 2 I have been informed that the only way to do an inplace upgrade is with a sp2 disk unfortunately I do not have a disc of vista SP 2. can someone give me a complementary statement?

    Hello

    1. what happens when you try to uninstall service pack 2?

    2. do you get an error message?

    I suggest you to see this link on how to uninstall service pack 2 for Windows vista:

    http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

    Check if that helps.

  • How can I disable the password so I don't have a need every time I start the computer? I am running VISTA

    I just want to turn on the computer and not necessary to use a password. I am running VISTA on a ACER aspire 9410-2028

    Hello

    This should help you:

    "How to Log on automatically on startup of Vista '

    http://www.Vistax64.com/tutorials/66966-logon-automatically.html

    See you soon.

  • How much RAM and hard drive I need to easily run creative cloud?

    I have a MacBook Air. Operating system OS X Yosemite, Version 10.10.5

    Memory: 4 GB 1600 MHz DDR3

    Processor: Intel Core i5 at 1.4 GHz

    159.59/249.8 GB free in my hardrive

    I need to know if I should switch to another computer in order to work with creative cloud, or if my current laptop will do the trick.

    Thank you!!

    How much of what you need depends on the applications you want to use.  The next page provides information and links about the requirements for various aspects of the use of the cloud, including individual products.

    Creating cloud - https://helpx.adobe.com/creative-cloud/system-requirements.html

  • Three questions.  The heart rate monitor now plays nice with the third-party applications?  Can you run these third-party applications, without the link to your phone?  How much storage?

    My experience with the original watch is that the heartbeat was working fine with apps in the House but does not work well with third-party applications.  Aboriginal health applications were sub par at best.  In addition, he wouldn't these third party apps (Strava), unless you were related to your phone.  A new doesn't do me much good if it is always the case.  Finally, it's great that you can bind your helmet now but what storage is the watch have?  I am not unrealistic, its understandable if its not much, but I hope that it is enough that a few apps and music enough to pass through a 4 hour tour.

    1 WatchOS3 made major changes in this area, and 3rd party applications get access to things like HR. OS3 also makes everything much more receptive. 3rd party applications will need to be updated to play with the HR monitor.

    2. you can run applications 3rd party without the phone with you, but for your type of application, you'll want a series 2 with GPS watch. The likes of Runkeeper OK working in the older shows, but without GPS, they do not really work you need. New - 3rd third party apps will need updates to work with the GPS watch. OS3 software has been available to developers for a while now, so I expect software updates only very quickly. I don't know if or when 3rd parties had access to the equipment and GPS devices, s, then it may be some while before they have series 2 updates.

    3. you can store 2 GB of music. How much music that is depends of course format and quality, but certainly several hours.

    Hope that helps

  • I need to run wzc wizzard how can I do this?

    Wizzard

    I need to run wzc wizzard how can I do this?

    Hi Paul, try this...

    How to start the Automatic Setup Wizard in Windows XP, Vista and Windows 7

    Read Full steps detailed here: http://www.inf.aber.ac.uk/advisory/faq/965/

    Set up Windows Zero Configuration (WZC) XP

    Most wireless cards of Clients (computer/laptop) can be configured by a manufacturer Wireless Utility that comes with the card, or Windows Zero Configuration (WZC)

    It is important that the wireless should be handled only with a single application.

    You can use the original, or WZC utility. When a is used, the other must be Off (not loaded in memory and not maintained active Windows service).

    Disabling the Wireless Utility manufacturer must be explained in the document of wireless cards.

    The following describes how to check and turn the WZC. The same principle applies in case you should stop and choose the options Off / stop while you're in the menus (the same method can be used to configure other services too).

    1. click on Start and run
    2. type in the box run "services.msc" (without the quotes).
    3 scroll down and look for the Automatic Wireless Configuration service of

    Double-click the Service, screenshot of services

    4. make sure he started and startup type is set to Automatic.

    Screenshot of WZC

    If the Service does not start, or and is not set to Automatic.

    To start the Service, click the Start button.

    To set the service to automatic, click on the arrow down and change it to Automatic.

    No Configuration Service automatic Windows at all.

    Use Windows regedit, drill down.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WZCSVC

    Add a DWORD entry that is named 'Start' and the value '2 '.

    Note that if you are not familiar with regedit do not use it without competent support.

    How to troubleshoot wireless network connections in Windows XP

    Source: http://www.ezlan.NET/WZC.html

Maybe you are looking for

  • Satellite Pro L300 - questions ACPI in Linux: buggy dsdt implementation

    Hi, I have a L300 with Insyde BIOS 1.50 and I was struggling with the ACPI in Linux (like many others, the web is littered with hacks and workarounds for this laptop). After you enable the acpi kernel debugging, I noticed that some features were mark

  • Store.e TV + - error, and green color

    My Store.Tv + have a mistake. When turn on, select HARD drive and select a video file, the green color of the screen TV and Store.e TV + Reload, is impossible to use. HDMI cable and RCA cable used.Help?

  • Mini Mac missed (and therefore a new!) - how to debug

    My mother has a Mac Mini that was old for a few years (running 10.6). It was getting really slow - even open the page of Google base takes awhile, and often he would lose wifi connection completely (even if the icon wifi in the bar menu says bars ful

  • iPhone 5 shows blue screen and restarts automatically

    iPhone 5 shows blue screen and restarts automatically

  • Adding disk hard BIOS setting

    I added the 1 TB SATA drive. Now things are going wrong after reboot without initial flaw. No USB, slow performance. Starts at W8.1, but something wrong with the USB devices. I see a short menu at startup. says press ctrl-I to define the two hard dri