How my VISA control can communicate with an instrument via TCP/IP?

Similar Questions

• How the physical machine can communicate with the virtual machines as well as the internet should work on a virtual machine

  Hi team,

  I ask that you forgive for asking a silly question without doing a free search.

  I'm using VMware workstation 6.5. I am able to communicate with both machines by selecting 'only option of home. "

  Is there a way by which the physical machine can communicate with the virtual machines.

  At the same time through the VMS, is it possible to access the Internet from the physical amchine.

  Help, please.

  Concerning

  Sriapti

  When you use a bridged vNIC the customer acts as any other host, so that you can access is by his IP (or name if a DNS configuration exists as you acceding to any other host.) What tools you can use depends on the guest operating system and the software available.

  I assume you mean access deskopt. Then you can use RDP (Windows Terminal services) or VNC (tight/tiny).

  For Linux, you can use this last or all the flavors of SSH. In the case of Linux, I use VNC through SSH tunnel. You can also tunnel X through SSH, so if you have an X server on another host (such as the Hummingbird for Windows), you can open your own office remotely there.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• What should I do when I can communicate with my instrument NI MAX through other programs, but not of LabVIEW?

  Hi all, this is a question that I had a few times before in one form or another.

  I use a Boxcar Integrator (245 SRS is the interface) for my experience. I connect to it via GPIB using my Agilent GPIB/USB interface. My program runs in LabVIEW, and I used it successfully in the (very recent) past.

  However, sometimes if I get LabVIEW or something, some weird stuff starts past trying to connect to it. For example, after the LV exit and go back to the top and any attempt to run my program, it throws the error:

  Error 1073807339 has occurred in the CITATION read in OR_Boxcar_ReadAnalogPort3.vi-> OR_Boxcar_SimpleTest.vi
  
  Possible reasons:
  VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  Which essentially means that he cannot connect for some reason or another (don't worry, I'm on the right GPIB address).

  So I go to equivalent NI MAX or Agilent (Keysight connection Expert), proceed to part communication from VISA to either and manually, connect with the machine. And it works! If clear my computer is communicating with the machine at this point, but not of LabVIEW.

  This could be the cause, and what I might try? Thank you!

  Oh shit, I forgot about it! I solved the problem, it was actually a 'me' problem is not a problem of LV. Even my solution would not be to help someone else who finds it. I was trying to read from my instrument, but it is in synchronous mode, so it generates an error if you try to read her when a data point has not been loaded in its buffer. I did something unusual, so it was not a point of data loaded into its buffer.

• Anyone know how I can communicate with adobe pro support by phone first?

  Anyone know how I can communicate with adobe pro support by phone first?

  Start here: Customer Contact for Premiere Pro Service. This will help you go down through your particular situation.

• How to create two separate networks in ESX that can communicate with each other with 2 x bear?

  Hello
  Just want to know a fundamental question concerning the configuration of my ESX host of singlebox with several vswitch and two teddy bears,
  What is the definition or use of the network Label and ID of Port? Yes VLAN, I know what it's meant for the physical world.
  My goal here is to
  1. create several vSwitch with much 4 VM on the two vswitch and it communicate somehow vswitch0 and vswitch1 happen? I need to plug the switch of pNIC2 for communication can / must travel through the network cable in my ESX?
  2. how to force all traffic Vmthe in a vswitch to enter a virtual machine that runs as a router VM and then talk to the other router vswitch VM? is this possible?
  Thank you.

  I do not know if I understand perfectly, but I often have to create isolated networks.

  In this case, there is only one NETWORK card, but it works with two, one on each switch. vSwitch0 can communicate with the outside world via the vmnic0. vSwitch0 and vSwitch1 are connected by the virtual router of pfsense. The virtual machines on the portgroup private connect to the world outside and any other VM on the portgroup VM network via the pfsense router. To access computers virtual private Portgroup requires a VPN connection via the pfsense router. This is a completely isolated network. With an additional uplink on vSwitch1, you can connect to other physical devices.

• My HP Officejet 6500 E710a-f can communicate with the router or wireless access point

  I don't even know if my printer supports wireless or not there only ethernet logo on it and no wireless setting in its control panel as shown in the manual, I plugged on the router via a cable many years ago but now, for some reason, I need get the router of the printer if it can communicate with the Wireless router and if she can , how it will be, and to ensure in this... I have no parameters to talk wireless in the printer, but as I remember in his specification he supported wireless do not know if I got the wrong specifications or my printer is missing something.

  and it is my printer status

  Hello

  Unfortunately, it is not a wireless printer:

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/my-OfficeJet-6500-E710a-f-wont-print-wirelessly-Windows-7/TD-p/1820813

  Kind regards.

• I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can you help me

  I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can anyone help?

  You must use the volume control on the monitor. That's how Apple means yo do and does not provide any method using Mac

• How much memory you can use with windows 7 64-bit ulta

  I would like to know how much memory you can use with ulta windows 7 64 bit.  I know you can use 32 GB with the Pro version. I have two computers can I up grade with a desire for additional memory up grade 512 GB and the other we're going to the top grade to 32 GB...

  Windows 7 Ultimate x 64 can support 192 GB.

• How many systems we can use with a cloud of Adobe® Photoshop® CC... ?

  Please let us know, how many systems we can use with a cloud of Adobe® Photoshop® CC... ?

  You can use it on two computers, but not at the same time.

• trying to communicate with a computer via an RS232 interface.

  Hi, I would like to communicate with my computer via RS232 DB - 25 side of machine that is configured as a DCE and DB - 9 my side PC as DTE, the computer only uses pin 2 (serial data in), pin 3 (serial data out) and PIN 7 a pattern. I wired the pins straight through except the ground which is in the DB 9 pin 5, so I tried to connect pin 2 pin 2 and 3 pin to pin, pin 7 to pin 5, but I couldn't get through my machine, then I tried 3 machine spindle pin 2 of my pc , machine pin 2 pin 3 pin 5-7 pc, unfortunately cannot also. I set everything correctly, as I think, but somehow could not do.

  (in the if said manual pc a DB9 so connecting db-9 to db-25 cable modem) - what a sense.

  I'm asking for help on this issue. Thanks for any help.

  Yes, of course do you. Who is stated in the manual. In MAX, you would use \r\n.

• CAN communicate with Veristand

  Hello

  I use a CRIO9081 with a module CAN 9268. I made a good configuration with detection of MAX module, power module, adding CAN wear under a Veristand project and I have NI-XNET...

  Now I want to interact with a sensor using CDN per Veristand, but I am a novice with CAN communication: you know some "user manual" on how to use CAN by Veristand to interact with another material?

  Thank you

  Hi vincentlg,

  In order to communicate with an external sensor via CAN, it is likely that you will need to set up a database BOX. You can create this with the OR-XNET database editor that is included with the XNET driver. The data BOX is responsible for converting frames in 'real' values (see: http://www.ni.com/white-paper/2732/en/#toc6). This also means that you can add a frame/signal to VeriStand. In doing so, signal will appear as a channel in the environment in which you can get (or set) the value of the channel in the VeriStand workspace.

  You can see that the manufacturer of the external sensor will provide a database or the scale that is required to convert the images into meaningful data. It is very unlikely that this will correspond to the sample database.

  Journal of tiara Bus converter allows to take the raw image data and convert it acquisition AFTER meaningful data. You will always need a data BOX to do this.

  To sum up: you can acquire data from a database, but you will have the raw images, which may not mean something to you. If you create a database, you will be translated these frameworks of the relevant data.

  I hope this helps, but I would like to know if I can clarify anything.

• Issue of school laboratory: setting IPs & VMnet1 so two computers can communicate with each other and to access the internet

  Hello ~

  This question has probably asked a million times in a way or another, but here's my specific: I'm a laboratory for school. I've set up two virtual servers (Windows Server 2012) in VMware Pro 12. The goal is to speak (see others). According to the instructions of the teacher, I set them up as follows:
  
  "Assign your appropriate servers of IP addresses based on your installation environment.  For example, if your network environment uses the class C address range 192.168.1.x, assign a server IP 192.168.1.10, 255.255.255.0 subnet mask, a default gateway 192.168.1.1 and the other server IP 192.168.1.11, 255.255.255.0 subnet mask, a default gateway 192.168.1.1.  Note: If these IP addresses will conflict with your internal network (provide your virtual machines with access to the internet), please choose a different set of address that will work for you. »

  
  

  I need to know what will work addresses. got a domain controller DC1.  Now, I can't see each other. I can't connect to Internet via IE which is one of the 'evidence' that I'm supposed to provide.

  
  

  When I go to the Publisher, I see as the guest only parameter (how is it said to set up when you first install the VMs) is 198.162.150.0. I did not who, but I'm a little but I don't want to make things worse by changing things. I guess that's where the problem is, but I'm not sure what to put the IP, default subset mask and DNS for so I'm stuck.
  
  If it means anything, it is in fact on a borrowed laptop which is connected to the WiFi and wireless. The laptop has internet but I don't know how exactly bringing on the virtual machine when it come to be able to connect. I don't need to become an admin system; This is a compulsory course and I'm just trying to understand enough about it to pass. The problem is that other labs are constructed on it so I can't just ignore it.
  
  Any advice you can offer would be GREATLY appreciated. By the way, happy new year to you all.
  

  Sorry, yes it was a typo. It's supposed to be 192.168.150.xxx.

  Although the virtual machine must be able to communicate if they are both configured similarly (i.e. host only in this case), you generally EF IP addresses in the subnet host only for those virtual machines to be able to access it from the host, which - as mentioned earlier - should have an address of VMnet1 IP of 192.168.150.1.

  André

• How Skype number I can buy with the same ID

  Hello

  I just want to know how many Skyp No. I can buy with my unique skyp ID.

  If I want to buy then a Skype number I have to create a new ID skpye, or by several, I train same ID?

  Hi, Skype606, and welcome to the Skype community,

  A Skype account can have ten 10 Skype number subscriptions attached to it.

  Please note, however, if you need to respond individually to each number or have a separate for each number of Skype Voicemail, then you will need to set up a separate Skype account for each number of Skype.

  Kind regards

  Elaine

  __________________________________________________________________________________________________
  Your question has been answered? Please click on the link to accept as a Solutionfor everyone can quickly find what works! As a post or want to say, 'Thank You ' -? Click on the button of congratulations!
  Reliable information: Brian Krebs: 3 basic rules for online safety

• What are the causes of error - OR-XNET: the NOR-XNET driver is no longer can communicate with the device.

  Hello

  I use X-NET-PCI8512, OS: Windows 7, C++ (middle of the QT interval).

  I'm pooling of card data (StreamIn member function) to ~ 100 Hz. card reading time (ReadStatus) to ~ 100 Hz.

  After about 40 min (depends on the amount of data in) I get this error:

  (Hex 0xBFF630B2) The NOR-XNET driver cannot communicate with the device. Solution: Make sure that the device was not removed from the computer.

  What are the causes of this error?

  Thanks in advance,

  Aviad

  Hello aviadCielo,

  When you get this error, what does do to make it work again? If you restart your program, start all this work?

  Secondly, what version of NOR-XNET do you use? It's maybe a software problem that could be resolved by upgrading to NOR-XNET 1.6.

  Finally, can you reproduce this problem with a simple program? If so, you can join the program you use?

• 2 separated on same ASA VPN tunnels can communicate with each other

  Here's the scenario that I have a VPN tunnel with one of my remote locations.   I also have a VPN Tunnel with a provider that supports the equipment for my organization.   I need to have my supplier able to communicate with equipment that live in my other VPN tunnel.   The two Tunnels are on the same ASA5540.

  1 is it Possible?

  2 How set it up?

  Thank you

  Follow this link for example. Enhanced spoke-to-spoke VPN, allows the two tunnels ending to your asa5540 to connect, using parameter permit intra-interface with configuration accless-list permits traffic of each endpoint of the tunnel.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00804675ac.shtml