How open/edit a list for different organizations

Similar Questions

• How to edit the list of recent files?

  How to edit the list of recent files?

  Yes, you can clear the list. Please see this thread for more information - How to remove on the Adobe reader recent files history?

  Kind regards

  Deepak

• How to edit the template for the briefing?

  Hi all
  
  Does anyone know how to edit the template for the briefing?
  
  The version I used is 11.1.1.6.5
  
  Thank you!
  
  Kind regards
  Anne

  What exactly you are trying to change in the template? The Table of contents can be edited like this: http://total-bi.com/2012/09/briefing-book-table-of-contents-page/

  Please check if useful/correct.

• How we split the screen for different horizontal and vertical divisions

  Hello
  
  How we split the screen for different horizontal and vertical divisions. I can't use panelSplitter because I need fixed screen and not the division which is movable/sliding. I tried inlineframe, but which fails because you cannot use forms, other trees components... :(
  
  so I would like to know how to do division without panelSplitter.
  
  Thanks in advance,
  Jyothi

  Hi Jyothi,

  If you set the panelSplitter attribute disabled to true, the delimiter becomes permanent/mobile no.

  Kind regards
  Amélie Chan

• Grid of fluid CC how to resize tags h for different screen sizes

  Hello

  I'm new to CC. I tried to create a header or a sensitive banner as follows: a logo image Center spot left, name and address, telephone number (more large fonts/bold) positioned more low rt. How to get the text to resize with responses? Can I use the properties panel to change the sizes of tag h for different devices or what I write and a link to the css file? I don't know how to proceed for several sizes of device without having to edit the fluid.css file created by DW. I know that sounds really simple for most. I hope if I get a basic understanding of the concepts that I'll be able to expand them.

  Thanks again,

  Andrea

  In my view, it is better to create a separate external stylesheet for content.  Do not change the files fluidGrid.css or boilerplate.css.

  In your content.css, use media queries to target different devices like this:

  / Special rules for mobile phones. */

  @media only screen and (max-width: 481px) {}

  Body {make-size: 75 %}}

  }

  / Special rules for tablets * /.

  @media only screen and (min-width: 482px) {}

  Body {size are: 100 %}}

  }

  / * Special rules that apply to workstations * /.

  @media only screen and (min-width: 1024px) {}

  Body {make-size: 135 %}}

  }

  Nancy O.

• How to create a list for the tabs 2nd level

  Dear Experts
  
  I created a view

  CREATE OR REPLACE FORCE VIEW  "MY_VW_TABS" ("APPID", "PTTARGET", "PTTABNAME", "PTTABLABEL", "TABNAME", "TABLABEL", "TABPAGE") AS
    select pt.APPLICATION_ID APPID,pt.TAB_TARGET PTTARGET,pt.TAB_NAME PTTABNAME,pt.TAB_LABEL PTTABLABEL,t.TAB_NAME TABNAME,t.TAB_LABEL TABLABEL,t.TAB_PAGE TABPAGE
  from APEX_APPLICATION_PARENT_TABS pt,APEX_APPLICATION_TABS t
  where t.tab_set = pt.TAB_NAME
  and pt.APPLICATION_ID=t.APPLICATION_ID
  order by pt.TAB_NAME,t.TAB_NAME

  I need to create a dynamic list based on this view of the * 2nd level tabs * (of my model of two-level tabs page), to be used in a region bordered on page 0. However, I found that the code in the list should be as follows:

  select level, labelValue label, 
         [targetValue]            target, 
         [is_current]             is_current_list_entry,
         [imageValue]             image, 
         [imageAttributeValue]    image_attribute,
         [imageAltValue]          image_alt_attribute,
         [attribute1]             attribute1,
         [attribute2]             attribute2,
         [attribute3]             attribute3,
         [attribute4]             attribute4,
         [attribute5]             attribute5,
         [attribute6]             attribute6,
         [attribute7]             attribute7,
         [attribute8]             attribute8,
         [attribute9]             attribute9,
         [attribute10]            attribute10
  from ...
  where ...
  order by ...

  Now, I have two questions:
  (1) how to use the view above to be used in the code of dynamic list?
  (2) is a good way to create a list for the tabs 2nd level?
  
  Best regards
  Mahmoud

  Mahmoud

  Are you sure that you view is correct?

  >

   where t.tab_set = pt.TAB_NAME
   
  

  Should be

  where t.tab_set = pt.current_for_tabset
  

  Nicolette

• How to implement MÜDE for different locations

  Hi guys,.
  
  I am in a quandary how to implement MÜDE for developers from different countries.
  
  I have developers who are in 3 different countries and I need to make them all run on the same repository.
  
  I want to implement the project absed MUDE and wouldn't an administrator to merge the repository presented by developer.
  
  The developers will be responsible for changes in the repository.
  
  How can I go about it?
  
  Thank you
  Saurabh

  Hello

  See this link for the development of multi user below

  http://oraclebizint.WordPress.com/2008/03/27/Oracle-BI-EE-101332-multi-user-development-of-repositories-mud/

  Concerning
  NGO

• How to assign the password for different SSID in embedded AP - w1941 Cisco

  Hello

  Can someone tell me the configuration of the CLI of assinging for SSID password created in cisco integrated access point 1941.

  If so, then can we use WEP encryption on cisco 1941 AP?

  Yet one thing, I get the message click the SSID that "information sent over this network might be visible to others" what does this mean and how to solve this problem. Thank you

  Gotcha!

  The command is...

  encryption [vlan vlan-id] key 1-4 size { 40 | 128 } encryption-key [transmit-key]
  
  We need to map the Vlan for each SSID..
  So the comand will be..
  encryption (vlan vlan#) key 1 size 40bit 7 F3546E765203 transmit-key
  We need to make sure that... under the SSID, we have mapped the coresponding vlan..
  that is.. if you have a SSID by name XYZ and you want the clients to get the IP from vlan 10.. then the config will be..
  en
  
      config t
  
      dot11 ssid XYZ
  
      vlan 10
  
      auth open
  
      mbssid guest-mode
  
      end
  config t
  
      int dot11 0
  
      encryption vlan 10 mode wep mandatory
  
      encryption 10 key 1 size 40bit 7 F3546E765203 transmit-key
  
      no shut
  
      end
  and followed by the subinterface commands.. and the same should be done for all the other SSIDs with different VLAN mappings and keys.
  let me know how this works out for you!!
  Regards
  
      Surendra
  
      

• How to edit the list of Applications installed in the UCM applications?

  We have a first standalone ELM that serves to concede a 2 CUCM1 and CUCM2 cluster node

  However, when I connect to CUCM1 the first page list installed applications that show the first License Manager, if I click on the link, it takes you to the first License manager installed originally with CUCM1

  The same is true for CUCM2

  I have to reach the first central we use use the specific URL for ELM

  How to clean these links?

  Hi David,

  If you run CUCM version 10.5.1.X and above all you can remove check below for details

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/PLM/10_5_1/userg...

  Search for "Remove Cisco first License Manager.

  HTH

  JB

• How to get a list for the IN operator in a variable

  I have a procedure that receives for one of its variables (var1) IN a list of strings comma-delimited. I output the value of var1 in one file so I know that he receives the full as string...
  
  "'700 calls numbers', ' 800 numbers calls, 900 number calls, ' Customer Service calls","Directory Assistance","emergency/911 calls","international calls","calls Standard,"voicemail ".
  
  "When you manually type a request to aid 'IN ('700 calls numbers', ' 800 calls numbers... ("Standard phone calls", "Voicemail") "the query returns three rows.
  
  When the procedure is a statement Select using 'IN (var1)' no row is returned. How can I make the list comma noted for the IN operator within a single variable?

  This depends on your version.

  http://tkyte.blogspot.com/2006/06/varying-in-lists.html

  Describes some methods.

• How to set the url for different environments such as DEV, PROD etc using the file resources in SSRS. How we determine the environment?

  While working with SSRS reports, I would like to store the URL once in a variable environment level and have all read reports from there. How this could be done. I think that by adding the resource file, that this might work. But how do we identify which URL should be invoked in varied such as DEV, TEST, PROD environments?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:
  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/

  I hope this helps!

• How to configure user accounts for different users of the PC?

  I have various users for laptop. Need to have the 3 people you connect with password. How do you define this on a laptop?

  See this link on how to create and manage user accounts: http://windows.microsoft.com/en-US/windows-vista/Create-a-user-account. Expand the second link (my computer is on a workgroup) for your likely information. Don't worry if have to jump the "User and family security accounts" link in step 1.

  Ask us if you need additional assistance.

  Rifdhan

  If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.

• How to edit the list on the play?

  I would like first to my question with a statement: it is extremely frustrating that I still have to ask this question, it must be a regular user interface capability. How can Anywho, I change the drive tab in Windows Media Player 12? All I see when I do / play a playlist is the name and the artist, followed by the stupid stars and the length of the file. Say I want to add the album of this list, why not do that? How is at - not 1 billion questions about it? It is a basic feature...

  Thank you in advance.

  I would like first to my question with a statement: it is extremely frustrating that I still have to ask this question, it must be a regular user interface capability. How can Anywho, I change the drive tab in Windows Media Player 12? All I see when I do / play a playlist is the name and the artist, followed by the stupid stars and the length of the file. Say I want to add the album of this list, why not do that? How is at - not 1 billion questions about it? It is a basic feature...

  Thank you in advance.

  Windows Media Player more!

• Profiles of lenses for different organizations, but the same sensor size?

  I downloaded LR 4.1 RC today.  Some of my lenses are not explained in LR so I downloaded then Lens profile Downloader Preview 3 to see if there are all the profiles available for download.  For some lenses I found profiles, but they did not go on the same body I have (same sensor size however).   Can I use profiles for the lenses if they are for a camera body that is different from mine, but always the same sensor size?  I know that with a lens profile LR auto corrects distortion, vignetting and CA.  That will work if my body is different from that of the body used for the profile of the lens?  Thank you.

  Yes it is possible.

  I downloaded it with Adobe Lensprofile Downloader

  In LR, I choose it bonded.

  I have the Panasonic Lumix G 20 mm f 1.7 ASPH on Panasonic GF1

  and the available profile is (same lens) for Panasonic Lumix DMC - G3.

  Works very well.

  Frans

• How to edit vpxa.cfg for ESXi 5

  Hi guys,.

  I give it a try on a migration of vCenter, I managed to pass the DSN and the fine VIM database, vCenter is installed and picked the ESXi hosts, I can't quite see my virtual machines. I believe that my ESXi can still point to the old IP address of vCenter.

  I downloaded Putty, and can visit the ESXi through the root user, I want to check the IP address of the ESXi host point to etc/vmware/vpxa/vpxa.cfg but when I type this in putty, I get the error 'permission denied '.

  If anyone can help?

  You must connect with the customer for the ESXi host directly and newspapers with the credentials of the root, not to the instance of vCenter. ;-)