how re vista windows install so lost the disk and the nly have export key sticker

Similar Questions

• I could not fix Windows XP Home service pack 2 upgrade. The system indicates that it cannot find a previous version of Windows installed .__I lost the previous version disk.

  Hi, I'm in big trouble.

  I just try to repair my Windows XP service pack 2/3 upgrade.

  The system asked me to save the copy, but after trying to save the computer freezes.

  I try several time to reinstall and now the system asked me to reinstall the software, I need to reinstall the earlier version of Windows that has been '2000', but unfortunately I throw away a few months ago.

  I bought a new hard drive were I have installed a new version of XP 64-bit.

  Is it possible to transfer all my documents, files, settings, etc in the new hard drive?

  All advice avaiable?

  Thanks in advance.

  CICO.

  Disconect your drive, insert your disk again as master, install Windows XP on the new drive. Once msupdate was executed and the manufacturers drivers have been installed and the sys works ok.

  Stop, connect the old drive as slave, restart

  Transfer data as needed. You may need to "take possession of records" - see victory help (donot attempt the transfer settings)

• OEM Windows installed on a new system and being told that my key is invalid.

  Product key problem

  A year ago, I bought a version of XP SP3 OEM and installed on a computer (clean install).  No problems.  A few months later, I had to wipe the drive and reinstall.  Once again, no problem.  Now I got a new computer, but when I try to install with the same disk (clean install) and the same product key, I like that is not valid.  Some things that are not a factor:

  Damaged drive.  The disc is impeccable.

  Error in the Enter key.

  Key is not not the disc.

  I don't see how something other than the computer, the key and installation disc could play a role.  I hope that Microsoft does not know what I do in my room.  I even traded keyboards, that someone suggested that this could be a factor (speaking with an accent keyboard?).

  My next step is to wipe the drive and start over, but I think I'll meet the same problem, because players will be the same.

  Any ideas?

  After the activation of Windows XP on the older PC, having to reactivate Windows XP is not so rare that are several hardware changes within a short time, not to mention the motherboard.

  Change the motherboard is a reactivation guaranteed event.  Just change all the RAM, PSU, CPU and made it a videocard in a few weeks.  "Activate Windows" more on wikipedia lists the 8 areas checked.

  The OEM Windows disk from the manufacturer-, Dell, HP etc. get of course do this even in the BIOS.  Dell OEM Windows on a non Dell motherboard, which I thought would do, would lead to shop for an another Windows Installer.

  This is how Windows mysteriously know material changes without connection to Microsoft.com - the BIOS chip.

  Beware of sellers on ebay with a still sealed OEM disc, but with a touch of product USED or not.   OEM disc will work as it clearly says right on it:

  "Relocation... CD '. Don't use this software to reinstall the operating system on a computer (mfgr)... For distribution only with a new computer (mfgr). »

• How to download windows install windows 7 32 bit service. The system (Dell 4500) let me download after xp to 7 upgrade. Involved also does not work.

  How to download windows install windows 7 32 bit service. The system (Dell 4500) let me download after xp to 7 upgrade. Involved also does not work.

  Install W7 sp1.

  Then go to the support page of Dell for your computer and download the audio drivers W7 from there and install them.

  See you soon,.
  Jerry

• How to put windows 7 pro on the new computer using the same key on the side of the other computer

  I have a computer comes with windows 7 pro. I am now building a new computer. How to put windows 7 pro on the new computer using the same key on the side of the computer. I don't have a Windows 7 disc.

  Original title: Windows 7 pro

  Tuesday, October 14, 2014 20:31:20 + 0000, 4hammond wrote:

  I have a computer comes with windows 7 pro. I am now building a new computer. How to put windows 7 pro on the new computer using the same key on the side of the computer. I don't have a Windows 7 disc.

  You can not, for at least one (and two possible) reasons.

  1. it isn't clean if you want to have two computers, or you
  you want to remove from the old computer and put it on the new. If
  you want once, you can't do that - the rule is very clear: there
  a copy (or a license) for each computer.

  There is nothing new here. This is exactly the same rule that has been in
  effect on all versions of Windows from at least with Windows 3.1.

  2. but even if you want it on a single and from uninstall
  the old computer, you can't do it. It is because if it came with the
  computer, it is an OEM version and the biggest drawback to he a
  OEM version, is that its license it permanently binds to the first
  It is installed on the computer. He can never legally be moved to another
  computer, sold or assigned (except with the original computer).

• How to access Windows 8 PC on the Internet with remote desktop connection?

  Hello

  Can someone tell me how to access Windows 8 PC on the Internet with remote desktop connection?

  I'm good with the software and I have used many Microsoft software since the 1980s. So I like Microsoft products, but since they have outsourced their tech support, you can't support quality even if you pay for it. I followed all the instructions in the Windows 8 will help about DRC setting screens, but I can't connect unless I'm on the same home network. Here are the details:

  I have a desktop PC with Windows 8 Pro and I have authorized the DRC. I tried two settings in system properties:

  1. Allow connections to this computer remotely.
  2. That allow the connection of computers running Office remotely with authentication NLA.

  I also turned on both private and Public Windows Firewall settings > allow an App or feature through Windows Firewall.

  I have installation then DRC to my laptop with Windows 8 (standard edition, not the Pro version). I have a DRC using the full name of the computer and other DRC using the static IP address for my ISP Desktop connection.

  I use the user account administrator Windows for connections of DRC of the laptop.

  I cannot get this to work on the Internet from a location outside my house with another ISP connection. The only way it works if I'm uncomfortable with the laptop using the same network home.

  I called Dell tech support and it is always useless and just a more aggravating waste of an hour to talk to their support of technique outsourced in India (who barely even understand English) and then they hang up the phone as it was supposed to be disconnected. I also called Microsoft support and lost more than an hour to speak to their outsourced tech support in the Philippines (and as support of the India, they hang up or 'disconnect' when they cannot answer your question and they go account learn you more about Windows while they do). U.S. tech companies use AMERICANS more for their technical support so their customers can get people who actually care about doing a good job and can actually understand English?

  So if someone who knows using Windows 8 for DRC on the Internet has some tips, then it would be greatly appreciated.

  Thank you!!

  P.S. If anyone is offended by my comments about the ugly, incompetent, stupid providing "technical support" in India or the Philippines - Nevermind! You go ahead and waste hours of your time talking to some Morón in these countries, who barely understands English and then 'disconnects' the call when they know that you realize that they are clueless and have all the answers.

  Take a look at no - IP.com or dyndns.com, and then use your host.domain:3389 of no.-ip/dynDNS or run RelaVNc SErver that is running on port 5900 by default.  Server options allow you to change the port as well if necessary.

• How to use windows search to search the contents of a bunch of files with random names / extensions?

  How to use windows search to search the contents of a bunch of files with random names / extensions? Plain txt files say 1,000 with random name of file extensions?

  You can always search within those, but you need to add extensions to the file system so that it knows to look inside these files.  You said that you have a lot, so it's perhaps tedious.  Here's How to search within several types of files.

  One thing you could try is rather to make a copy of this file, rename all the files to the same extension (even an extension false for example something.bill) and perform your search on this band.  Just an idea.

• How to fix windows photo viewer showing the class not regitered error in the local system.

  Dear all,

  Please provide me the solution.

  How to fix windows photo viewer showing the class not regitered error in the local system.

  Thank you best regards &,.

  Amol.

  Hello Amol,

  Were there any changes made on the computer before the show?

  The problem may occur if there is a problem with Java on the computer. I suggest you to check the link and try to update Java:

  http://www.Java.com/en/download/help/download_options.XML

  http://www.Java.com/en/download/index.jsp

  Let us know the results.

• Recently bought a pirated copy of Windows 8. Windows installed perfectly, but the product key is not working.

  I am originally from Pakistan, and has recently purchased a copy pirated Windows 8, because the original ones are not available... Windows installed perfectly, but the product key is not working

  Original title: My Windows 8's product key does not work.

  Hi Bselva,

  As your boss has reinstalled the operating system, it should have the product key. Ask the product key and then activate the operating system.

  Also check out this link:

  http://Windows.Microsoft.com/en-CA/Windows-8/why-activate-Windows

  http://Windows.Microsoft.com/en-CA/Windows-8/activation-errors

  If you do not have the product key, you will need to buy one from this link.

  http://Windows.Microsoft.com/en-us/Windows/buy

  Keep us informed on the status of the issue.

• When I click on Akamai Download Manager says of the window which opens, "413 header length too large."  How can I fix? I am running Windows 8 on a laptop computer and that you have turned off my pop ups.

  When I click on Akamai Download Manager says of the window which opens, "413 header length too large."  How can I fix? I am running Windows 8 on a laptop computer and that you have turned off my pop ups.

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

• lost my sound and now I have this error # 0X800A0ice

  My Windows Internet gave me the local problem.

  Then I lost my sound and now I have this error # 0X800A0ice.

  Need help now.

  Hello

  1. what operating system do you use?

  2. what version of internet explore do you use?

  3. What is the exact error message you received?

  4 did you change on your computer?

  I suggest you follow the link and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• lost serial number and don't have an e-mail when I loaded donw?

  lost serial number and don't have an e-mail when I loaded donw?

  Hi Bruce-PC,

  I don't know what product you're referring, but this document has instructions for finding a serial number Adobe: quickly find your serial number

  Best,

  Sara

• How recover Vista after installing Linux Enterprise Desktop from Novell?

  Hello world!

  Please can someone help with this problem. How can I recover my windows which I lost due to the installation of Linux on my windows. I tried too much time go by restarting and pressing f8, but this recovery option does not lead me to go and get my windows to the State facoty. As far as I know, I think that the hard drive has been reformatted after installation and deleted as a result options of backup or restoration, and if this is the case how can I restore my Windows file system and recover my windows in the back.

  Thank you for your e-mail to be on [email protected]

  Concerning

  Year s

  Hello!

  I think for the moment that you are not able to restore your previous version of Windows or you created the before recovery disk?

  I put t know what phone you have but all Toshiba notebook, they will be delivered with Vista without a recovery disk, but you can create one yourself. After you start the laptop the first time, you get the following message:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

  But now it s late to create the recovery disk and use the disk recovery HARD works, you must run the factory settings. This means that you can install your own version of Windows and then you start the drive HARD Toshiba Recovery function.

  Sorry mate, but the only way I see at the moment is to order a new drive Toshiba Recovery directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  If you have the recovery disk, you can restore your Windows version or let's say the factory settings.

  Good bye

• Don't install windows vista no disk but have product key sticker

  Interesting problem? I have a laptop Acer Aspire 7720 G, which had Vista Home basic installed on the purchase, without discs provided but sticker windows product code based on the laptop. I just bought and installed windows 7 Home premium which seem to instal fine, but now my graphics card is not recognized (nvidia geforce). all I get is poor graphic vga? I tried to update the drivers from windows update and nvidia, no sucsess. 'Systems' I can't even see my graphics card, it seems I just graphics vga integrated, not good on a computer with blu-ray/dvd player and power dvd installed, nothing will work out of a bad quality dvd movie.

  someone said that acer do not support windows 7 for this laptop and recommended re-setup of trash vista, but since I have no disk how can I do this. I don't have the product key code?

  do I really have to install windows vista again and have I wasted my money on windows 7 that I can't use because my graphics card is not recognized? really frustrating, ilike, windows 7, want to use it, but how can I if it does not recognize my nvidai card, any help would be appreciated

  We answer your question of Vista to help here; and that's all...

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Tecra S11 - How to reinstall Windows 7 after upgrading the HARD drive?

  How to reinstall Windows 7 pro after an upgrade to 500 GB HARD drive? How to access password protected data after relocation? How can I get a professional installation of Windows 7 DVD?

  (I do not installed new HARD drive yet, but I intend)

  Hey Buddy,

  You have created the Toshiba Recovery disk? Perfect!
  After Exchange of HARD drive, you need this you to install Windows 7 disc. The Toshiba Recovery disk contains an image of the factory settings, which means that you will have the factory settings on the new HARD drive after the use of the disc. You must boot from it and follow the instructions on the screen.

  > How to access password protected data after relocation?
  It would be interesting to know what data you mean exactly.
  Before you reinstall Windows, you must back up all data on a disk for example external HARD.